aboutsummaryrefslogtreecommitdiffstats
path: root/host/lib/usrp
Commit message (Expand)AuthorAgeFilesLines
* SBX enable LO LPF at 1.5GHzJason Abele2011-04-231-12/+31
* Makes 2nd SBX proto workJason Abele2011-04-231-32/+47
* Updating SBX to latest UHDJason Abele2011-04-231-15/+47
* Capture characterization changesJason Abele2011-04-231-6/+6
* Initial SBX-ADI driverJason Abele2011-04-232-0/+644
* uhd: move thread loop condition flag to before barrier (prevents race condition)Josh Blum2011-04-222-2/+2
* Merge branch 'usrp2/discover_with_old_fw'Josh Blum2011-04-193-38/+81
|\
| * usrp2: improve the compatibility error messagesJosh Blum2011-04-192-8/+7
| * usrp2: use the firmware's discovered compat numberJosh Blum2011-04-131-4/+16
| * usrp2: add check for holler protocol, we can support backwardsJosh Blum2011-04-132-15/+29
| * usrp2: support fw protos with older compats for various partsJosh Blum2011-04-082-20/+38
* | rfx: changes to pick from the dboard clock rates and use R=1Josh Blum2011-04-181-17/+22
* | Updated documentation and improved XCVR RSSI calculationJason Abele2011-04-141-2/+11
* | usrp-e100: reset dboard clocks on rate change, and dont cache in dboard ifaceJosh Blum2011-04-073-4/+32
|/
* uhd: define LINUX in build system to simplify some checksJosh Blum2011-04-011-5/+1
* Merge branch 'use_boost_barrier'Josh Blum2011-04-013-24/+31
|\
| * uhd: implemented boost barriers on all code that creates threadsJosh Blum2011-03-313-24/+31
* | Merge branch 'rfx400_tx'Josh Blum2011-04-011-3/+6
|\ \
| * | Correct RFX400 div2 logic, makes RFX400 TX workJason Abele2011-03-311-3/+6
* | | usrp1: fixed codec ctrl aux adc read (didnt start conversions) + cleaned-up l...Josh Blum2011-03-301-44/+29
* | | usrp1: switch usrp1 iface to use spi read (transact never worked)Josh Blum2011-03-301-17/+29
| |/ |/|
* | usrp1: ignore claimed interfaces, avoids the problem of discovery when one de...Josh Blum2011-03-291-2/+10
|/
* usrp-e100: set the ticks-per-second every time we change clock rateJosh Blum2011-03-292-5/+1
* uhd: update copyright headers with automated scriptJosh Blum2011-03-2315-15/+15
* usrp-e100: added module compat num check, made fpga compat constant more obviousJosh Blum2011-03-113-6/+15
* usrp2: use the discovered mtu to clip the user specified mtuJosh Blum2011-03-211-8/+11
* usrp-e100: reinstate the VCO calibration timeout messageJosh Blum2011-03-061-3/+0
* usrp-e100: disabling VCO cal check, its not right, and the warning alarms peopleJosh Blum2011-03-051-0/+3
* Merge branch 'boost_fs_string' into nextJosh Blum2011-03-171-1/+1
|\
| * uhd: replace file_string() with string() for deprecation reasonsJosh Blum2011-03-151-1/+1
* | Merge branch 'master' into nextJosh Blum2011-03-171-1/+1
|\ \
| * | E100: fix test clock output enableNick Foster2011-03-161-1/+1
| |/
* | usrp2: fixed mtu discovery bug, was using the last failed valueJosh Blum2011-03-141-15/+11
* | usrp_e1xx : Remove reset offset from register map.Philip Balister2011-03-141-1/+0
* | Merge branch 'windows_fix' into nextJosh Blum2011-03-141-2/+3
|\ \
| * | usrp2: minor fix to use more ntohlJosh Blum2011-03-141-2/+3
* | | usrp_e : Remove commented out FPGA reset code.Philip Balister2011-03-141-3/+0
|/ /
* | usrp2: clip the mtu discovery if its within default MTU + a fewJosh Blum2011-03-131-0/+6
* | usrp2: also store expected_time in-between statesJosh Blum2011-03-111-4/+5
* | usrp2: bump up timeout on mtu discovery (seen to be a bit too small on window...Josh Blum2011-03-111-1/+1
* | usrp1: safe destruction for usrp1 deviceJosh Blum2011-03-102-2/+13
* | usrp1: also replaced control error prints w/ throwsJosh Blum2011-03-101-14/+5
* | Merge branch 'master' into nextJosh Blum2011-03-101-1/+1
|\|
| * usrp2: created safe call macro and handle usrp2 ~mboard throwingJosh Blum2011-03-101-2/+11
| * usrp2: save alignment indexes between state to fix the lost packet problemJosh Blum2011-03-091-14/+24
| * TVRX: no longer muxing in noise on Q channelNick Foster2011-03-081-1/+1
* | usrp1: throw in control calls that fail rather than print the errorJosh Blum2011-03-102-171/+82
* | usrp2: created safe call macro and handle usrp2 ~mboard throwingJosh Blum2011-03-101-2/+11
* | usrp: moved wrapper utils into multi-usrpJosh Blum2011-03-103-69/+43
* | usrp2: save alignment indexes between state to fix the lost packet problemJosh Blum2011-03-091-14/+24
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 18:56:26 +0000