aboutsummaryrefslogtreecommitdiffstats
path: root/host/lib/usrp/dboard
Commit message (Collapse)AuthorAgeFilesLines
* twinrx: add lo charge pump propertiesMark Meserve2019-05-215-19/+116
|
* rh: Fix typo in setting up RX frontendAlex Williams2019-02-271-1/+1
| | | | | | The function for setting up the RX frontend was erroneously looking at previous TX settings to determine whether to submit a command. This fixes the issue.
* rh: revise correction data usageMark Meserve2019-02-223-11/+19
| | | | | | | | | | - UHD's calibration utilities use the LO frequency, so this is the frequency we should be using too. - Disables loaded corrections in lowband, as the utilities will not generate valid corrections at these frequencies. Manual corrections can still be added via the property tree. - Changed corrections logging to include frequency and less certainty of the correction file's existence.
* rh: reset rx iq balance on initMark Meserve2019-02-221-0/+1
| | | | | - Fixes a bug where a previous setting could carry over between sessions.
* rh: increase timeout of set_rate's rpc callMark Meserve2019-01-211-1/+4
|
* uhd: mpm: apply clang-format to all filesBrent Stapleton2019-01-1620-2574/+1926
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Applying formatting changes to all .cpp and .hpp files in the following directories: ``` find host/examples/ -iname *.hpp -o -iname *.cpp | \ xargs clang-format -i -style=file find host/tests/ -iname *.hpp -o -iname *.cpp | \ xargs clang-format -i -style=file find host/lib/usrp/dboard/neon/ -iname *.hpp -o -iname *.cpp | \ xargs clang-format -i -style=file find host/lib/usrp/dboard/magnesium/ -iname *.hpp -o -iname *.cpp | \ xargs clang-format -i -style=file find host/lib/usrp/device3/ -iname *.hpp -o -iname *.cpp | \ xargs clang-format -i -style=file find host/lib/usrp/mpmd/ -iname *.hpp -o -iname *.cpp | \ xargs clang-format -i -style=file find host/lib/usrp/x300/ -iname *.hpp -o -iname *.cpp | \ xargs clang-format -i -style=file find host/utils/ -iname *.hpp -o -iname *.cpp | \ xargs clang-format -i -style=file find mpm/ -iname *.hpp -o -iname *.cpp | \ xargs clang-format -i -style=file ``` Also formatted host/include/, except Cpp03 was used as a the language standard instead of Cpp11. ``` sed -i 's/ Cpp11/ Cpp03/g' .clang-format find host/include/ -iname *.hpp -o -iname *.cpp | \ xargs clang-format -i -style=file ``` Formatting style was designated by the .clang-format file.
* formatting: remove vim hints in headersBrent Stapleton2019-01-167-7/+0
| | | | | Remove trailing vim hints in header files. This functionality will be replaced by clang-format.
* uhd: skip formatting misc arrays, maps, etc.Brent Stapleton2019-01-164-1/+10
| | | | | | Various data structures are nicely formatted to be human-readable. clang-format makes these structures harder to read, so we can skip formatting these sections.
* rh: add support for identify argMark Meserve2019-01-102-12/+40
|
* rh: implement set_rateMark Meserve2019-01-103-9/+40
|
* rh: general code cleanupMark Meserve2019-01-101-4/+5
| | | | | | | | - Add default bandwidth range - Add default mash order constant - Delete MPM todos - Cleanup whitespace in MPM python code - Add docstring for is_lo_dist_present
* rh: add support for iq and dc correction filesMark Meserve2019-01-094-18/+88
| | | | | | | - Update corrections on frequency or LO source change - Add legacy EEPROM properties - Move DSP control initialization earlier - Fix TX antenna list property
* rh: adjust frequencies for lo filter bankMark Meserve2019-01-081-1/+1
| | | | | - Moves the cutover frequency for the 900 MHz LO filter from 900 to 975 MHz. This fixes an image issue in TX when transmitting near 325 MHz or 900 MHz.
* TwinRX: Fix tuningMichael West2019-01-021-1/+1
| | | | | - Set SPI clock back to 3 MHz - Fix returned frequency for ADF5355 (rev A and B boards)
* N310 E320: Add initialization of TX bandwidthmichael-west2018-12-192-2/+2
| | | | - Fixes "Error: map::at" errors (during calls to get_tx_bandwidth())
* uhd/mpm: eiscat: Various changesRyan Marlow2018-12-192-28/+219
| | | | | | | | | | | | | | - correct lmk initialization parameters - adding missing parameters and consts wrt clock synchronization. - fixed default master clock rate - eiscat, ddc: update xml. - remove references to CORDIC_FREQ in ddc_eiscat - update readback reg addr in radio_eiscat - set default spp from 3992 to 3968. - updated jesd mode sequence initialization - updating eiscat_radio_ctrl_impl - add rx_codecs to property tree to display correct ADC chip. - updated issue_stream_cmd
* rh: add highband spur reduction optionMark Meserve2018-12-124-4/+83
| | | | | | | | | - When highband_spur_reduction is enabled, the lowband LO will be disabled during highband operation. This improves spur performance, but also renders timed tune commands unusable due to the MPM call. - A warning is logged if the user uses a timed tune command that would change the state of the lowband LO, as the MPM call will occur immediately instead of at the given command time.
* TwinRX: Make routing to LO1 and LO2 mutually exclusivemichael-west2018-12-102-25/+15
|
* TwinRX: Tuning improvementsmichael-west2018-12-101-2/+7
| | | | | | - Added delay for VTUNE calibration as per ADF5355 and ADF5356 data sheets - Increased SPI clock to 10 MHz - Removed write to register 10 during tuning of ADF5356 to match ADF5355 code and reduce tune time
* TwinRX: Fix initializationmichael-west2018-12-101-62/+60
| | | | | | | - Reordered initialization - Fixed issue where LO2 initialization data was being written to LO1 - Moved SPI config to be a member variable so it is not constantly re-created - Changed SPI clock divider from hard-coded value to a calculation based on CODEC rate
* rh: fixed lowband tuningMark Meserve2018-12-071-1/+2
| | | | - Sometimes, SW1 was not updated when a switch to lowband occurred.
* rh: add handling for "all" loMark Meserve2018-12-042-9/+104
| | | | | | | - Adds "all" LO properties. - Adds handling of "all" value in all LO functions. - Re-adds value_error exceptions for illegal settings of LO2, which previously caused issues when the "all" LO was used from multi_usrp.
* mg: Unindent falsely indented block of codeMartin Braun2018-11-301-29/+29
| | | | Whitespace changes only.
* rh: add support for atr frontend controlMark Meserve2018-11-295-92/+103
|
* rh: fix typo in lo distribution propertiesMark Meserve2018-11-161-2/+2
|
* rh: fix typo in initMark Meserve2018-11-141-1/+1
| | | | - This broke tx streaming via the multi_usrp API.
* cmake: Update coding style to use lowercase commandsMartin Braun2018-11-145-20/+20
| | | | | | | | | | | | | | | | | Also updates our coding style file. Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code (with GNU compliant sed): cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done > convert.sed \ && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' \ '*CMakeLists.txt' | xargs -0 gsed -i -f convert.sed && rm convert.sed (Make sure the backslashes don't get mangled!)
* rh: initialize switchesMark Meserve2018-11-071-3/+10
|
* rh: adjust tx lo gain tableMark Meserve2018-11-052-7/+12
| | | | - Improves performance for frequencies greater than 3.5 GHz
* rh: add lo distribution supportMark Meserve2018-11-054-0/+161
| | | | | | | | | - This is a combination of 5 commits. - rh: add lo distribution board gpio expander - rh: add lo distribution mpm functions - rh: add code to conditionally initialize lo distribution - rh: change empty i2c device from exception to assertion - rh: add lo distribution board control
* rh: fix handling of spur_dodging argMark Meserve2018-11-013-7/+30
|
* rh: add support for rhodium devicesMark Meserve2018-10-2511-1/+3479
| | | | | | Co-authored-by: Humberto Jimenez <humberto.jimenez@ni.com> Co-authored-by: Alex Williams <alex.williams@ni.com> Co-authored-by: Derek Kozel <derek.kozel@ni.com>
* mg: fixup set_rx_antennaTrung Tran2018-10-041-1/+1
| | | | | | After going to 2 radios configuration (FPGA), the channnel value is passed into this set_rx_antenna now have value either 0 or 1. We want the mapping of {radio_channel:cpld_channel} = {0:CHAN1} or {1:CHAN2}.
* e320: Fix master_clock_rate settingSugandha Gupta2018-09-241-0/+4
| | | | | | The master clock rate was getting overwritten while running the codec loopback self test. So now we save the current rate before running the test and then reapply it.
* mg: clipping frequencyTrung Tran2018-09-142-4/+7
| | | | | Clipping requested frequency to acceptable ranges in Magnesium TX/RX set frequency functions.
* e320: gpio: Fix front panel GPIO readbackSugandha Gupta2018-09-121-1/+4
| | | | The gpio devtest passes after this fix. Enabling the test
* twinrx: enable ch1 lo amps if ch2 is using an external lo sourceMark Meserve2018-08-211-1/+13
| | | | | - AMP_LO1_EN_CH1 controls U2, the amp for the external LO1 port, so it must be set high if channel 2 is using an external LO (external or reimport)
* e320: Fix tx/rx atr - antenna and frequency settingsSugandha Gupta2018-08-095-30/+32
| | | | | | - Change RX/TX min/max frequency according to AD9361 datasheet - Fix set_atr_bits to change with rx/tx frequency and antenna independently - Make AMP switching active high
* fixup! mpm: mg: add set_master_clock_rate memberMartin Braun2018-08-031-2/+2
|
* mg: Allow calling set_rate() at runtimeMartin Braun2018-08-022-6/+38
|
* mpm: mg: add set_master_clock_rate memberDaniel Jepson2018-08-022-0/+13
|
* uhd: initial commit of UHD support for E320Brent Stapleton2018-07-1810-0/+1866
| | | | Co-authored-by: Sugandha Gupta <sugandha.gupta@ettus.com>
* UBX: Add support for phase synchronization at LTE clock ratesMichael West2018-07-171-12/+18
|
* mg: fix tx power issueTrung Tran2018-07-144-27/+4
| | | | | | This commit will fix power issues with 2 radios configuration (UHD 3.12+). Removed unused _master boolean. CPLD path are now correct, each radio has its own CPLD object.
* mg: remove set_rpc_lockTrung Tran2018-06-182-14/+1
|
* cmake: Add ENABLE_N300 targetMartin Braun2018-06-113-21/+27
| | | | | | | | | | Driver support for N310/N300 was previously implied by ENABLE_MPMD, which had two issues: 1) It was not clear that ENABLE_MPMD was actually enabling the N3x0 2) It did not allow to enable mpmd support without N3x0 support This resolves these issues.
* mg: Rename _L to _log_prefixMartin Braun2018-05-312-12/+12
| | | | Avoids clashes with ctype.h.
* basicrx/lfrx: Enable frontend muxing on X3x0Martin Braun2018-05-081-16/+46
| | | | | | The selection of frontend modes (AB, A, B, BA) is now enabled on X3x0. Unlike older USRPs, switching the frontend is done through the antenna API (e.g., usrp->set_rx_antenna("A")).
* basicrx: Refactor driverMartin Braun2018-05-081-42/+54
| | | | | | | | - Removal of some Boostisms - Proper use of lambdas - Replace magic constants with constexpr's No functional changes.
* lib: Purge use of boost::assign, except for uhd::dictMartin Braun2018-05-024-786/+783
| | | | | | | Replaced with initialization lists. Note: uhd::dict does not work with initializer lists without making changes to said data structure. This commit has no functional changes, so keeping the boost::assigns for uhd::dict.
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-30 20:45:29 +0000