aboutsummaryrefslogtreecommitdiffstats
path: root/host/lib/usrp/common
Commit message (Collapse)AuthorAgeFilesLines
* ADF4002: Fix register programming (bug #974)michael-west2015-12-151-4/+4
|
* max287x: assert target_freqMartin Braun2015-10-161-0/+1
|
* fixup! ad9361: codec manager needs more includes on some platformsMartin Braun2015-10-121-0/+1
|
* B200: Fix for CODEC loopback test failuremichael-west2015-10-121-4/+34
| | | | - Add delay after putting CODEC in loopback mode
* UHD: Fix max287x N divider rangesmichael-west2015-09-011-5/+5
|
* Fixed minor warningsNicholas Corgan2015-09-011-1/+1
| | | | | | * Unreferenced exceptions in try-catch statements * Incorrect function documentation * Unlabelled unused variables
* B2XX: Added B200mini supportmichael-west2015-08-174-4/+19
|
* ad9361: Delay Tx Quad Cal from initialization to streamer startTom Tsou2015-08-131-2/+8
| | | | | | | | | | | | | | | | | | | Patch addresses issue: #742 "tx_waveforms seems to produce unexpectedly large image" Tx Quad Cal performance is temporally dependent with better results when run after the AD9361 is configured for transmission than at initialization. This gets is roughly 5-10 dB of additional quadrature image suppression. Even better performance can be reached when Tx Quad Cal is run after streaming and the AD9361 is actively transmitting. Calibration in this state, however, requires user intervention by retuning the transmit chain by > 100 MHz. Total IQ suppression should be in the range of 40-50+ dBFS dependent on operating frequency. Signed-off-by: Tom Tsou <tom.tsou@ettus.com>
* ad9361: Use separate Tx and RX frequency calibration intervalsTom Tsou2015-08-132-19/+39
| | | | | | | | | | | | | | | | | | Patch addresses issue: #872 "B200: Tx and Rx calibration share same frequency state" ADI specifies recalibration for certain paths when the LO shifts by more than 100 MHz. Tx and Rx maintain independent LO frequencies so use separate values for determining whether to perform re-calibration at tuning intervals. Also, maintain last calibration frequencies from initialization and clock rate changes. Doing so prevents a re-calibration if the first requested Tx or Rx frequency is close to the default values of 850 and 800 MHz respectively. Signed-off-by: Tom Tsou <tom.tsou@ettus.com>
* ad9361: Reconfigure RF and baseband DC offset correctionTom Tsou2015-08-132-37/+39
| | | | | | | | | | | | | | | | | | | | | | | | Addressed and related issues: #186 "B200: Catalina RX signal distortion" #821 "Incorrect behavior with auto DC Offset correction turnned off" #820 "Rx DC Offset Correction Convergence on B2xx Dependent on Master Clock Rate" #755 "Demodulate IQ signal amplitude oscillation on B210 at 200 MHz carrier" Due to recent change "ad9361: Invert phase on Rx LNA bypass path", we now have uniform phase alignment across the entire gain range. This drastically improves performance of RF DC tracking - not to be confused with the - active and input dependent - baseband (BB) DC tracking loop. RF DC tracking is not affected by input signals and updates during gain changes. The updated configuration provides improved DC suppression for operation whether BB tracking loop is enabled or disabled. New behavior differs from the previous case where disabling BB tracking would clear all - static and active - calibration tables. Now, static correction tables are not wiped when BB tracking is turned off. Signed-off-by: Tom Tsou <tom.tsou@ettus.com>
* ad9361: Enable single shot Rx Quad CalTom Tsou2015-08-132-31/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | Patch provides an alternative resolution to issue #807 "B210: severe distortion on In-phase data for some gain settings" Rx quadrature tracking, an active input-sensitive loop, causes problems on a handful of receive signals. Problematic signals include pulsed GMSK and near-DC tones among others. As an alternative, improve operation when active tracking is disabled. Run single shot quadrature calibration at the following events to provide calibrated image suppression. The corrections without active tracking are not input dependent. Rx quadrature single shot calibration points: 1. AD9361 initialization 2. Clock rate change 3. Tuning differences greater then 100 MHz when tracking is disabled Note that if tracking is enabled (default case), this patch has no effect during streaming. Only the non-default (user set) case is affected. Signed-off-by: Tom Tsou <tom.tsou@ettus.com>
* ad936x: Disable AGC by defaultMartin Braun2015-08-101-1/+1
|
* ad9361/b200/e300: Refactored AD936x + perifs managementMartin Braun2015-07-294-3/+428
| | | | | | - Created AD936x manager class - Moved functionality from B2x0 and E310 into manager - Separated property tree + perifs initialization in both device classes
* ad9361: Updated copyright headersMartin Braun2015-07-216-6/+84
|
* ad9361: Update Tx Quad Cal to match current gain tablesTom Tsou2015-07-131-1/+1
| | | | | | | | | | | | | | | | Fixes issue #828 "B200: Tx quadrature calibration regression in master" Following commit added new gain table settings to reflect updated values from ADI. Gain indices used by Tx Quad Cal were not matched to accommodate the new tables. 2b06c38 "b2xx: dc offset and iq imbalance correction control" Requirement for Tx Quad Cal is for TIA gain and analog LPF gain to be set at 0 dB, or 0x20 in the gain table. Final effect is a dramatic decrease in Tx DC offset and quadrature image. Signed-off-by: Tom Tsou <tom.tsou@ettus.com>
* ad9361: Prevent positive loop gain on Rx quadrature trackingTom Tsou2015-07-131-1/+1
| | | | | | | | | | | | | | Patch fixes a portion of #807 "B210: severe distortion on In-phase data for some gain settings" ADI recommends that the "Prevent Pos Loop Gain" setting be enabled to prevent the Rx quadrature tracking loop from becoming unstable at low power levels. ADI Linux kernel driver also reflects this setting. We do not follow the ADI recommendation. Adjust accordingly. Signed-off-by: Tom Tsou <tom.tsou@ettus.com>
* ad9361: Invert phase on Rx LNA bypass pathTom Tsou2015-07-131-1/+8
| | | | | | | | | | | | | | | | | | | This patch resolves issue #823 "B200: Receive RF DC calibration makes calibration worse below 34 dB" According to ADI reference documents, enabling any of the 3 LNA's in the receive path causes a 180 degree phase shift. Correspondingly, we invert the LNA bypass path (gain indices below 34 dB) to match. Testing, however, reveals that one of these statements or the polarity inversion setting itself is false. Disabling the switch results in expected behavior and proper phase alignment. Overall effect is up to 60 dB of DC offset suppression ahead of the Rx analog LPF. This reduces the problematic dependency on active baseband tracking and may resolves multiple tracking stability issues. Signed-off-by: Tom Tsou <tom.tsou@ettus.com>
* Merge branch 'maint'Martin Braun2015-07-081-2/+2
|\
| * B200: New AD9361 I/O timing programming to work with new b200_io.v logic design.Ian Buckley2015-07-081-2/+2
| |
* | ad9361: brought in Boost.Assign std::map workaround for MSVC 2013Nicholas Corgan2015-06-291-4/+11
| |
* | Merge branch 'maint'Martin Braun2015-06-094-7/+42
|\| | | | | | | | | | | | | Conflicts: host/lib/usrp/common/ad9361_ctrl.hpp host/lib/usrp/common/ad9361_driver/ad9361_device.h host/lib/usrp/e300/e300_remote_codec_ctrl.hpp
| * B200/E300: Fix incorrect readback of frequency.michael-west2015-05-224-3/+29
| | | | | | | | When the LO is tuned it changes the frequency on both channels. The frequency value read back for the first channel was not updated when the LO frequency for the other channel was tuned to a different value.
| * ad9361: Minor clarifications on req_rate and baseband_bwMartin Braun2015-05-192-4/+13
| |
* | Merge branch 'maint'Martin Braun2015-04-201-0/+1
|\| | | | | | | | | Conflicts: host/CMakeLists.txt
| * uhd: Fixed missing includeMartin Braun2015-04-201-0/+1
| |
* | Merge branch 'maint'Martin Braun2015-04-143-9/+4
|\| | | | | | | | | | | | | Conflicts: host/lib/usrp/b200/b200_io_impl.cpp host/lib/usrp/common/ad9361_driver/ad9361_device.cpp host/lib/usrp/common/ad9361_driver/ad9361_device.h
| * ad9361: Removed recommended max clock rate warningMartin Braun2015-04-143-9/+4
| |
* | Merge branch 'maint'Martin Braun2015-04-141-6/+6
|\| | | | | | | | | Conflicts: host/CMakeLists.txt
| * dboards: Fixed type deduction for older compilers on max287x codeMichael West2015-04-141-6/+6
| |
* | Merge branch 'maint'Martin Braun2015-04-101-0/+799
|\|
| * Fix for BUG #683: UHD: Need to factor out MAX287x code for UBX and CBXmichael-west2015-04-101-0/+799
| | | | | | | | | | - Factored out MAX287x code into common header file - Added necessary code for MAX2871 synchronization.
* | Merge branch 'maint'Martin Braun2015-04-062-6/+9
|\|
| * uhd: Add ability to get and set command time through dboard_iface.michael-west2015-04-032-6/+9
| | | | | | | | | | This creates a wb_iface child class called timed_wb_iface, which adds support for timed commands.
* | Merge branch 'maint'Martin Braun2015-03-273-7/+7
|\|
| * Warning fixesNicholas Corgan2015-03-273-7/+7
| | | | | | | | | | | | | | * CMake now not applying C++ flags to C files * GCC 4.4: anti-aliasing rules * MSVC: narrowing, differences in subclass function parameters * Clang: uninitialized variables
* | b2xx: filter API implementation. Supports listing of RX/TX filters, querying ↵Julian Arnold2015-03-194-58/+714
| | | | | | | | RX/TX filter information and writing of analog and FIR filters
* | ad9361: DC and IQ correction only done if df > 100MHz during a tune requestJulian Arnold2015-03-132-6/+15
| |
* | uhd: Fixed multiple compiler warningsMichael Dickens2015-03-111-14/+14
| | | | | | | | | | | | - Use ULL and LL etc. so compiler doesn't need to decide constant's types - define the empty 'while' loop to include {} to make older compilers happy - Use explicit type names for BOOST_CHECK_EQUAL
* | b2xx: AGC supportJulian Arnold2015-03-054-24/+185
| |
* | e3xx: support for dc offset and iq balance controlJulian Arnold2015-02-232-15/+11
| |
* | b2xx: dc offset and iq imbalance correction controlJulian Arnold2015-02-205-106/+233
| |
* | Merge branch 'maint'Martin Braun2015-02-171-10/+10
|\|
| * b200: Revised configuration of AD9361 for master_clock_rates >56e6MHz. ↵Ian Buckley2015-02-171-10/+10
| | | | | | | | Issues #649 & #691
* | Merge branch 'maint'Martin Braun2015-02-122-21/+6
|\| | | | | | | | | Conflicts: host/examples/rx_samples_to_file.cpp
| * ad936x: removing gain_offset from rx set_gainJon Kiser2015-02-112-21/+6
| |
* | Merge branch 'maint'Martin Braun2015-01-271-1/+7
|\| | | | | | | | | Conflicts: host/docs/usrp_e3x0.dox
| * ad9361: Removed unnecessary digital TX attenuationAshish Chaudhari2015-01-231-1/+7
| | | | | | | | | | | | - Fix ported from He. The current TX filter does not need the additional -6dB of headroom. Set it to zero so we meet our max power specs.
| * fixup! ad9361: More check for interpolation/decim ratiosAshish Chaudhari2015-01-231-1/+1
| |
* | Merge branch 'maint'Martin Braun2015-01-232-7/+16
|\ \
| * | fixup! ad9361: More check for interpolation/decim ratiosAshish Chaudhari2015-01-231-1/+1
| |/