aboutsummaryrefslogtreecommitdiffstats
path: root/host/lib/include/uhdlib/usrp
Commit message (Collapse)AuthorAgeFilesLines
...
* tx_fe_200: make register offset controllableBrent Stapleton2019-11-261-1/+1
| | | | | | Following the changes in RX frontend controls, TX frontend register offsets are now arguments to the factory function. They default to 4, which is what the register offset was in the file before these changes.
* rx_fe_3000: Changing register address calcBrent Stapleton2019-11-261-1/+2
| | | | | | | | Changing how we calculate RX frontend register addresses to allow for different register offsets. The register addresses are now calculated in a manor similar to how gpio_atr_300_impl does register address calculations, which is to allow a reg_offset to be passes in at construction. The current default is reg_offset=4.
* lib: cores: Adapt spi_core_3000 for use with register_ifaceMartin Braun2019-11-261-1/+12
| | | | | Removes the requirement for a wb_iface, and also the requirement for regs to be 4 addresses apart.
* lib: adf535x: Add trace logs for synth configurationMartin Braun2019-11-261-0/+18
|
* lib: Replace uhd::get_system_time() with steady_clockMartin Braun2019-11-261-6/+10
| | | | | | Benchmarks show that using C++ chrono features beats uhd::get_system_time(), and the latter is simply not appropriate unless a uhd::time_spec_t is required.
* lib: utils: Add new signature to get_freq_and_freq_word()Martin Braun2019-11-261-1/+7
| | | | | The new signature uses tuple as the return value, instead of passing in output variables as references (C-style).
* rx_fe_3000: formatting for upcoming changesBrent Stapleton2019-08-251-5/+5
|
* max287x: improve loggingMark Meserve2019-06-121-7/+12
| | | | | - Split tuning log into 3 lines - Remove duplicated MAX287X
* cores: Apply clang-format to ?x_dsp_core_3000.*Martin Braun2019-05-222-13/+12
|
* adf435x: run clang-formatMark Meserve2019-05-071-146/+251
|
* adf435x: add low spur tuning modeMark Meserve2019-05-071-5/+56
| | | | | - adds a new mode to the adf435x driver which provides general spur performance improvements
* adf535x: add charge pump controlMark Meserve2019-05-021-3/+55
|
* adf435x: add charge pump with double parameterMark Meserve2019-05-021-0/+34
|
* adf435x: enhance logging messagesMark Meserve2019-05-021-10/+13
|
* include: Remove BOOST_VERSION hacks for 1.58Martin Braun2019-04-241-5/+0
| | | | | This removes all version hacks that were required for Boost versions 1.53 through 1.58 (since we now require 1.58).
* lib: Allow "0" and "1" as false/true values for constrained device argsMartin Braun2019-03-201-2/+6
| | | | | | | | | | Example: $ uhd_usrp_probe --args type=x300,ignore_cal_file=0 is equivalent to (the currently supported): $ uhd_usrp_probe --args type=x300,ignore_cal_file=false
* uhd: mpm: update all license header w/ "-or-later"Brent Stapleton2019-03-081-1/+1
| | | | Updating all SPDX license identifiers to include "-or-later"
* include: max287x: Fix conversion warningMartin Braun2019-02-281-1/+1
|
* uhd: Replace all usage of boost::noncopyable with uhd::noncopyableMartin Braun2019-02-1520-42/+45
| | | | | | This fixes the build errors that occur due to switching locations of noncopyable.hpp within Boost, and also allows us to remove boost::noncopyable in one fell swoop.
* lib: fix includes for boost::noncopyableMichael Dickens2019-02-111-0/+5
| | | | | | | - expert_nodes.hpp: fix to work with BOOST_VERSION < 105600, since UHD still supports Boost 1.53.00. - gpio_atr_3000.hpp: requires boost::noncopyable header, so replicate that (now) in export_nodes.hpp.
* math: Replace boost::*::{lcm,gcd}() with portable versionsMartin Braun2019-01-182-6/+4
| | | | | | Boost changed the lcm() and gcd() functions in Boost 1.67. This creates portable UHD versions to be used instead. They use various Boost versions under the hood conditionally.
* formatting: preparing for uhd::math cleanupBrent Stapleton2019-01-182-370/+450
| | | | Formatting files that will be touched in upcoming changes to uhd::math
* uhd: skip formatting misc arrays, maps, etc.Brent Stapleton2019-01-161-0/+2
| | | | | | Various data structures are nicely formatted to be human-readable. clang-format makes these structures harder to read, so we can skip formatting these sections.
* TwinRX: Fix tuningMichael West2019-01-021-7/+4
| | | | | - Set SPI clock back to 3 MHz - Fix returned frequency for ADF5355 (rev A and B boards)
* TwinRX: Enable phase resync on ADF535xmichael-west2018-12-101-17/+9
|
* TwinRX: Tuning improvementsmichael-west2018-12-101-10/+8
| | | | | | - Added delay for VTUNE calibration as per ADF5355 and ADF5356 data sheets - Increased SPI clock to 10 MHz - Removed write to register 10 during tuning of ADF5356 to match ADF5355 code and reduce tune time
* twinrx: revise adf5356 frac2 register calculationMark Meserve2018-10-171-1/+1
| | | | | - If FRAC2 isn't exactly FRAC1 at certain frequencies, drifting spurs can be seen in the spectrum
* lmx2592: add spur dodgingMark Meserve2018-10-171-1/+4
|
* lib: Improve constrained_device_args_tMartin Braun2018-08-101-2/+14
| | | | | - Add default parser helper - Allow _enforce_discrete() for str_arg
* rfnoc: dma_fifo: Added a more robust flush mechanismAshish Chaudhari2018-08-031-1/+1
| | | | | | | | | - The flushing mechanism now looks similar to that in noc_shell - Make use of new flush bit in FIFO control register - Restrict using the clear bit only after flushing to ensure no partial packets are introduced in the stream. (clear immediately empties out FIFOs) - Changes are backwards compatible with older FPGAs
* b100: Move fifo_ctrl_excelsior to b100 subdirMartin Braun2018-07-311-51/+0
| | | | | This device is the only one using it, and no one will ever use it going forward.
* mpm: initial commit of E320 codeBrent Stapleton2018-07-181-0/+6
| | | | Co-authored-by: Sugandha Gupta <sugandha.gupta@ettus.com>
* fixup! e300: merge files from rfnoc-develMartin Braun2018-07-061-0/+3
|
* e300: merge files from rfnoc-develTrung N Tran2018-06-291-7/+0
| | | | This disables the ability to do "network mode" on the E310.
* *_dsp_core: Update frequency when updating ratesVidush2018-06-212-0/+4
| | | | | Since the frequency shifter is set to a relative rate, it needs to be updated when changing the sampling rate.
* ad9361: Add API to set 1R1T/2R2T timing modesSugandha Gupta2018-06-151-0/+3
| | | | | LVDS interface can support both timing modes 1R1T/2R2T The API sets the required bit in catalina registers.
* uhd: Added LMX2592 driverDerek Kozel2018-05-031-0/+55
|
* lib: Purge all references to boost::this_thread::sleep()Martin Braun2018-04-301-5/+6
| | | | Replace with std::this_thread::sleep_for().
* ad9361: Fix bandwidth warnings and rangesVidush2018-04-271-3/+3
| | | | | | | Allows full bandwidth range to user. Reviewed-by: Michael West <michael.west@ettus.com> Reviewed-by: Martin Braun <martin.braun@ettus.com>
* ad936x: De-boostify ad936x_manager, minor cleanupMartin Braun2018-04-262-3/+4
| | | | | | | - Remove all use of boost::bind and boost::function - Demote some log messages to DEBUG - Change some formatting to match coding guidelines - B2xx/E310: Match changes in loopback function
* lib: move atomic.hpp and system_time.hpp to uhdlibMartin Braun2018-04-061-1/+1
|
* DDC/DUC: switch CORDIC -> DDS for all relevant variable namesRyan Marlow2018-03-222-0/+2
| | | | - Bump compat number for DDC/DUC to 2.0
* uhd: Move internal headers to uhdlib/Martin Braun2018-03-1434-0/+3886
| | | | | | | | | | | | | | | | To avoid the proliferation of additional include directories and multiple ways of including project-local headers, we now default to moving all headers that are used across UHD into the uhdlib/ subdirectory. Some #include statements were also reordered as they were modified for closer compliance with the coding guidelines. Internal cpp source files should now include files like this: #include <uhdlib/rfnoc/ctrl_iface.hpp> Reviewed-by: Ashish Chaudhari <ashish.chaudhari@ettus.com>
* uhd: Move some gpio_defs constants definitions out of headersMartin Braun2018-02-271-0/+127
| | | | Reviewed-by: Trung Tran <trung.tran@ettus.com>
* uhd: Update license headersMartin Braun2018-02-191-1/+2
| | | | | | | All copyright is now attributed to "Ettus Research, a National Instruments company". SPDX headers were also updated to latest version 3.0.
* uhdlib: Update constrained_device_args_tMartin Braun2018-01-181-0/+301
- Allow enums to be non-consecutive - Move to uhdlib/ - Add unit tests - Updated N230 use of constrained_device_args_t
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-08 19:37:59 +0000