uhd - Ettus' UHD Repository

	Commit message (Collapse)	Author	Age	Files	Lines
*	Small changes / markup on the e1xx documentation.	Ben Hilburn	2011-10-26	1	-14/+20
\|
*	docs: unified gpsdo docs and sensors stuff	Josh Blum	2011-10-25	1	-0/+22
\|
*	usrp: add documentation for front-panel leds (needs FPGA update)	Josh Blum	2011-10-12	1	-0/+17
\|
*	usrp-e100: removed clockgen config stuff and docs	Josh Blum	2011-06-06	1	-15/+0
\|
*	usrp-e100: created device address arg for master clock rate, removed eeprom hack	Josh Blum	2011-05-12	1	-9/+6
\|
*	USRP1: added support for setting clock rate from EEPROM	Josh Blum	2011-05-01	1	-4/+4
\| \| \| \| \|	Basically, same deal as the previous changeset but for USRP1. Modified previous changes so that the key is shorter (mcr = master_clock_rate)
*	usrp-e100: add ability to set/get default master clock rate from EEPROM	Josh Blum	2011-05-01	1	-5/+11
\| \| \| \| \| \| \| \| \|	Mboard eeprom map class can parse the setting (4 byte float). The clock control will try to set the eeprom rate if present, otherwise or under failure condition, it sets the default. Updated docs, example, and provided helpful verbose. I would prefer that users burn the desired rate to the eeprom (and they may too).
*	Updated documentation and improved XCVR RSSI calculation	Jason Abele	2011-04-14	1	-0/+38
\| \| \| \| \| \| \| \| \| \|	Documented dboard sensors Documented DBSRX2 Added description of direct conversion vs low IF for each dboard Added E1xx docs for adding refclock and pps connectors XCVR rssi calculation was in unscaled dB units Used chart in datasheet (pg 16) to rescale to dBm
*	uhd: replace <prefix> with <install-path> in docs for clarity	Josh Blum	2011-04-05	1	-1/+1
\|
*	usrp-e100: notes on unbricking/clock reovery	Josh Blum	2011-02-08	1	-0/+14
\|
*	usrp-e100: added app notes for fpga loading and reclocking	Josh Blum	2011-02-01	1	-0/+51