aboutsummaryrefslogtreecommitdiffstats
path: root/firmware
Commit message (Expand)AuthorAgeFilesLines
* BUG #396: X3x0: Packet loss within burst while running full duplex overnightmichael-west2014-03-261-13/+9
* BUG #396: Mid-Burst Sequence Errorsmichael-west2014-03-192-8/+10
* BUG #371: X300: Dies and left in bad statemichael-west2014-03-033-50/+67
* Putting the ICMP destination unreachable fix in X300 firmware.Ben Hilburn2014-02-141-34/+44
* Pushing the bulk of UHD-3.7.0 code.Ben Hilburn2014-02-146-364/+23
* Un-doing firmware change regarding ICMP packate handling.Ben Hilburn2014-02-041-44/+34
* Merging USRP X300 and X310 support!!Ben Hilburn2014-02-04176-0/+63251
* Squashed commit uhd/cleanup.Ben Hilburn2013-11-278-806/+486
* octoclock: make install sets fuse values before burning hex fileNicholas Corgan2013-09-061-1/+1
* Merge branch 'maint'Josh Blum2013-08-231-1/+1
|\
| * usrp2: fix firmware rx clear register offsetJosh Blum2013-08-231-1/+1
* | Corrected PDD1 config on gps_nmea neetbuoyboy2013-08-201-1/+1
* | OctoClock supportNicholas Corgan2013-06-073-0/+970
|/
* b100: firmware updates for next branch compatabilityJosh Blum2012-07-193-29/+33
* usrp2: fix fw bug for spi transact (order of operations)Josh Blum2012-06-071-2/+2
* fifo ctrl: various tweaksJosh Blum2012-03-231-2/+5
* fifo ctrl: ~usrp2_fifo_ctrl acks, usrp2 DCM workaround, bootloader no blinkieJosh Blum2012-03-232-1/+6
* fifo ctrl: spi core work and host implementationJosh Blum2012-03-232-15/+11
* spi: work on fw support for simple spi coreJosh Blum2012-03-239-137/+71
* usrp2: host and fw implementation for fifo controlJosh Blum2012-03-231-0/+5
* usrp2: work on alternative stream destinationJosh Blum2012-03-236-102/+122
* usrp2: fw unlocks when ICMP dest unreachableJosh Blum2012-03-211-1/+4
* B100: enable_gpif(0) disables FIFO output clock on FX2. this prevents the "st...Nick Foster2012-03-161-2/+2
* usrp2: removed unused memory map entriesJosh Blum2012-02-271-5/+1
* B100: Firmware reset tweaks.Nick Foster2012-02-092-47/+29
* B100: use FPGA external reset on initNick Foster2012-02-061-1/+6
* uhd: added/renamed various readme filesJosh Blum2012-02-042-6/+31
* B100/B150: firmware disable FIFOs until host enables to keep junk outNick Foster2012-02-032-8/+11
* b100: bump compat numbers for slave fifo modeJosh Blum2012-02-011-1/+1
* B100 firmware changes to allow slave mode TX/RX.Nick Foster2012-02-014-162/+59
* usrp2: same change but to fw updaterJosh Blum2012-01-242-11/+3
* usrp2: firmware should reset dsp on icmp pktJosh Blum2012-01-242-11/+8
* usrp2: fw fix for hal_uart_getc_noblock return codeJosh Blum2012-01-043-5/+7
* uhd: tweaks to calibration utilitiesJosh Blum2011-11-231-981/+0
* uhd: useful tweaks from userJosh Blum2011-11-081-0/+1
* Fixing VID comment in firmware to reflect ERLLC rather than FSF.Ben Hilburn2011-10-141-1/+1
* b100: new eeprom map for special 9 byte serialJosh Blum2011-10-122-4/+5
* B100: change B100 PID in usb_descriptors.a51 as wellNick Foster2011-10-111-1/+1
* B100: use PA6 for pktendNick Foster2011-10-101-2/+1
* 1 Character Patch for USRP1 usrp_eeprom.bin generationJason Abele2011-10-101-1/+1
* B100: modify build_eeprom for correct B100 PIDNick Foster2011-10-101-1/+1
* B100 firmware fix for FPGA load race condition, plus a little cleanup for rea...Nick Foster2011-10-102-19/+14
* usrp2: uart/udp work in host and fw, workingJosh Blum2011-09-286-41/+158
* ZPU/USRP2: first stab at UDP UART firmwareNick Foster2011-09-283-2/+20
* n-series: removed unused bootloader files in fwJosh Blum2011-09-084-647/+0
* N2XX: fix bug in firmware updater (don't use local variables for static data)...Nick Foster2011-08-092-3/+6
* usrp2: shutoff streaming using the stop bit (fix)Josh Blum2011-07-292-4/+5
* usrp2: remove hw config readback, not neededJosh Blum2011-07-281-8/+3
* usrp2: comment out poll + print overflow/underflow in fwJosh Blum2011-07-191-0/+2
* usrp2: added fw minor and moved ICMP dest error handling to txrx appJosh Blum2011-07-182-28/+36
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 16:00:26 +0000