aboutsummaryrefslogtreecommitdiffstats
path: root/firmware
Commit message (Expand)AuthorAgeFilesLines
* OctoClock: bugfixes/improvementsNicholas Corgan2014-08-2014-165/+193
* b200: Removed all AD9361 related firmwareAshish Chaudhari2014-08-1213-2747/+6
* b200: AD9361 firmware bugfixesAshish Chaudhari2014-08-011-0/+19
* b200: Moved AD9361 driver to hostAshish Chaudhari2014-08-014-11/+17
* OctoClock firmware upgrade, added host driverNicholas Corgan2014-07-2383-658/+12077
* Addressing comments from review.michael-west2014-07-171-9/+2
* Fix for BUG #469: Bad/Empty GPS NMEA strings returned when the queries are m...michael-west2014-07-171-4/+11
* x300: Changed bus_clk frequency to 166.67MHz.Ashish Chaudhari2014-04-281-5/+5
* b2xx: Pulling FX3 and AD9361 source code into master.Ben Hilburn2014-04-0724-0/+7291
* BUG #396: X3x0: Packet loss within burst while running full duplex overnightmichael-west2014-03-261-13/+9
* BUG #396: Mid-Burst Sequence Errorsmichael-west2014-03-192-8/+10
* BUG #371: X300: Dies and left in bad statemichael-west2014-03-033-50/+67
* Putting the ICMP destination unreachable fix in X300 firmware.Ben Hilburn2014-02-141-34/+44
* Pushing the bulk of UHD-3.7.0 code.Ben Hilburn2014-02-146-364/+23
* Un-doing firmware change regarding ICMP packate handling.Ben Hilburn2014-02-041-44/+34
* Merging USRP X300 and X310 support!!Ben Hilburn2014-02-04176-0/+63251
* Squashed commit uhd/cleanup.Ben Hilburn2013-11-278-806/+486
* octoclock: make install sets fuse values before burning hex fileNicholas Corgan2013-09-061-1/+1
* Merge branch 'maint'Josh Blum2013-08-231-1/+1
|\
| * usrp2: fix firmware rx clear register offsetJosh Blum2013-08-231-1/+1
* | Corrected PDD1 config on gps_nmea neetbuoyboy2013-08-201-1/+1
* | OctoClock supportNicholas Corgan2013-06-073-0/+970
|/
* b100: firmware updates for next branch compatabilityJosh Blum2012-07-193-29/+33
* usrp2: fix fw bug for spi transact (order of operations)Josh Blum2012-06-071-2/+2
* fifo ctrl: various tweaksJosh Blum2012-03-231-2/+5
* fifo ctrl: ~usrp2_fifo_ctrl acks, usrp2 DCM workaround, bootloader no blinkieJosh Blum2012-03-232-1/+6
* fifo ctrl: spi core work and host implementationJosh Blum2012-03-232-15/+11
* spi: work on fw support for simple spi coreJosh Blum2012-03-239-137/+71
* usrp2: host and fw implementation for fifo controlJosh Blum2012-03-231-0/+5
* usrp2: work on alternative stream destinationJosh Blum2012-03-236-102/+122
* usrp2: fw unlocks when ICMP dest unreachableJosh Blum2012-03-211-1/+4
* B100: enable_gpif(0) disables FIFO output clock on FX2. this prevents the "st...Nick Foster2012-03-161-2/+2
* usrp2: removed unused memory map entriesJosh Blum2012-02-271-5/+1
* B100: Firmware reset tweaks.Nick Foster2012-02-092-47/+29
* B100: use FPGA external reset on initNick Foster2012-02-061-1/+6
* uhd: added/renamed various readme filesJosh Blum2012-02-042-6/+31
* B100/B150: firmware disable FIFOs until host enables to keep junk outNick Foster2012-02-032-8/+11
* b100: bump compat numbers for slave fifo modeJosh Blum2012-02-011-1/+1
* B100 firmware changes to allow slave mode TX/RX.Nick Foster2012-02-014-162/+59
* usrp2: same change but to fw updaterJosh Blum2012-01-242-11/+3
* usrp2: firmware should reset dsp on icmp pktJosh Blum2012-01-242-11/+8
* usrp2: fw fix for hal_uart_getc_noblock return codeJosh Blum2012-01-043-5/+7
* uhd: tweaks to calibration utilitiesJosh Blum2011-11-231-981/+0
* uhd: useful tweaks from userJosh Blum2011-11-081-0/+1
* Fixing VID comment in firmware to reflect ERLLC rather than FSF.Ben Hilburn2011-10-141-1/+1
* b100: new eeprom map for special 9 byte serialJosh Blum2011-10-122-4/+5
* B100: change B100 PID in usb_descriptors.a51 as wellNick Foster2011-10-111-1/+1
* B100: use PA6 for pktendNick Foster2011-10-101-2/+1
* 1 Character Patch for USRP1 usrp_eeprom.bin generationJason Abele2011-10-101-1/+1
* B100: modify build_eeprom for correct B100 PIDNick Foster2011-10-101-1/+1
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 17:30:26 +0000