aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* Merge branch 'fpga_ise12' into fpga_nextJosh Blum2010-11-230-0/+0
|\
| * no need for second sequence number anymore. Each dsp tx chainMatt Ettus2010-11-212-11/+8
| | | | | | | | generates its own flow control packets now.
| * shouldn't be executableMatt Ettus2010-11-201-0/+0
| |
| * modernize the testbenchMatt Ettus2010-11-191-18/+30
| |
| * get rid of extraneous U messages when we actually had an ACKMatt Ettus2010-11-182-7/+10
| |
| * fix problem with consecutive timed packets on txMatt Ettus2010-11-181-2/+0
| |
| * simplify time comparison to speed up logic and meet fpga timingMatt Ettus2010-11-132-4/+27
| |
| * we're still on version 12.1Matt Ettus2010-11-132-2/+2
| |
| * Add flow control and other small vrt fixes to u2p, minor cleanupsMatt Ettus2010-11-112-34/+38
| |
| * reset properlyMatt Ettus2010-11-111-0/+1
| |
| * compiles with new file locationsMatt Ettus2010-11-111-1/+1
| |
| * handle zero-length packets properlyMatt Ettus2010-11-113-55/+76
| |
| * clear out the vita tx chain and the tx fifo. need to check the fifoMatt Ettus2010-11-115-24/+25
| | | | | | | | reset to make sure it is in the correct clock domain.
| * added ability to truly clear out the entire rx chain. also removed old ↵Matt Ettus2010-11-113-29/+27
| | | | | | | | style fifo in rx.
| * gray code address for emiMatt Ettus2010-11-111-1/+7
| |
| * fifo randomizer for emiMatt Ettus2010-11-115-4/+108
| |
| * now handles frames larger than the vita packet (i.e. with padding)Matt Ettus2010-11-111-6/+16
| |
| * don't clear out following packets on an eob ackMatt Ettus2010-11-111-1/+1
| |
| * don't flag an error on eob ackMatt Ettus2010-11-111-1/+1
| |
| * proper triggering for interrupts generated on the dsp_clkMatt Ettus2010-11-111-1/+8
| |
| * cleanup for 32 bit seqnumMatt Ettus2010-11-111-4/+3
| |
| * increase compatibility number for flow controlMatt Ettus2010-11-111-1/+1
| |
| * switch to 32 bit sequence numbers. Will wrap in ~15 hours at max rateMatt Ettus2010-11-113-14/+16
| |
| * send message on eob to ack the end of transmissionMatt Ettus2010-11-111-1/+6
| |
| * typo which isn't caught by xilinxMatt Ettus2010-11-111-1/+1
| |
| * separated flow control and error reporting on tx path. should work with and ↵Matt Ettus2010-11-114-25/+43
| | | | | | | | without flow control
| * go to the correct stateMatt Ettus2010-11-111-3/+3
| |
| * add a fifo to the end of the mux to help in timing.Matt Ettus2010-11-111-6/+13
| |
| * add trigger to makefileMatt Ettus2010-11-111-0/+1
| |
| * assign setting reg addressesMatt Ettus2010-11-111-2/+2
| |
| * declarationsMatt Ettus2010-11-111-2/+3
| |
| * checkpoint in flow control packet generationMatt Ettus2010-11-115-42/+147
| |
| * these got dropped during the rebaseMatt Ettus2010-11-114-31/+37
| |
| * Removed 'ifdef for second DCM that was a deign idea for external SRAM on ↵Ian Buckley2010-11-111-49/+4
| | | | | | | | | | | | u2plus. Hardcoded -90 degree clcok from first DCM as final solution
| * 1) Created new FIFO IP in Coregen. 512x36 dual clcok FIFO with programable ↵Ian Buckley2010-11-1111-11/+555
| | | | | | | | | | | | full watermark 2) Put larger FIFO on output of u2plus extramfifo that is compatable with u2_rev3 EMI fixes.
| * 1) u2p has added a new signal from the SRAM to the pinout, RAM_ZZIan Buckley2010-11-114-11/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | which allows the SRAM to be placed in a sleep mode. This pin was erroniously pulled high at the top level rendering the SRAM unusable. 2) Added declaration for extramfifo debug bus which had got deleted at some point in the past 3) Created a debug bundle of signals from extsramfifo to help diagnose problem 1) 4) u2p Rev1 PCB ommits control of any of the SRAM chip selects. Made a code change so that control logic does not rely on the presence of this pin and ensuring that the SRAM is always placed in READ mode in any idle cycles.
| * Defaulted all SRAM pins to LVCMOS25 8mA FASTIan Buckley2010-11-111-67/+67
| |
| * Placed 2nd DCM into `ifdef DCM_FOR_RAMCLK which is dissabled by defaultIan Buckley2010-11-112-7/+23
| | | | | | | | | | Derived RAMCLK from 270degree offset of principle core DCM giving theoretical 2.5nS timing advance on RAM_CLK relative to RAM_* signals.
| * Added external RAM FIFO to u2plus.Ian Buckley2010-11-1120-100/+4498
| | | | | | | | | | | | | | | | | | | | Added code branch to ext_fifo.v using generate that instantiates different input and out fifo's and touched nobl_fifo code so that it works at 18 and 36bit widths. Added 2nd DCM to top level to generate off chip RAMCLK. Added explicit I/O instances to top level for tristate drivers and changed signals to core as needed. Creted new FIFO's in core gen to replace much larger FIFO's used on u2rev3
| * revert unneeded changes and incorrect commentsMatt Ettus2010-11-112-34/+34
| |
| * reconnect GPIOs, remove debug pins, meets timing nowMatt Ettus2010-11-111-5/+3
| |
| * Modified phase shift of DCM1 to -64 which is intended to give more timing ↵Ian Buckley2010-11-111-1/+1
| | | | | | | | | | | | | | margin on reads from the SRAM at the expense of Writes to the SRAM. Tested to be at least as stable as a phase shift of 12 and beter looking timing on the logic analyzer. Signals driven by the FPGA are observed changing on the SRAM pins about 4 nS after the rising edge of the RAM clock.
| * Enabled phase offset adjustment on DCM_INST1 which drives the external Fast ↵Ian Buckley2010-11-111-12/+12
| | | | | | | | | | | | | | | | SRAM clock. Set phase shift to -12 after experimentation using logic analyzer to see results. This value gives near optimum 1.5nS setup times on the source sync signals FPGA -> SRAM under lab conditions.
| * Added to DCM's and some BUFG's to align the internal 125MHz clock edge with ↵Ian Buckley2010-11-114-5/+100
| | | | | | | | | | | | | | its presentation externally at the NoBL SRAM. Since we don't have a board level trace to use to estimate clock propigation delay we just loop through the I/O on the FPGA. This hasn't been verified as working on a USRP2 yet.
| * Enhanced test bench to be more like real world applicationIan Buckley2010-11-112-7/+14
| |
| * hangedddddddextrnal fifo size to use full NoBL SRAMianb2010-11-111-1/+1
| |
| * Corrected extfifo code so that all registers that are on SRAM signals are ↵ianb2010-11-115-46/+59
| | | | | | | | | | | | | | | | packed into IOBs Explcit drives and skews added to GPIO pins Corrected minor error in FIFO logic that showed data avail internally incorrectly
| * capacity logic fixMatt Ettus2010-11-111-1/+1
| |
| * Added capacity to the module pinoutIan Buckley2010-11-111-3/+4
| |
| * Added a bunch of debug signals.Ian Buckley2010-11-114-9/+19
| |
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 21:47:23 +0000