aboutsummaryrefslogtreecommitdiffstats
Commit message (Expand)AuthorAgeFilesLines
...
| | | * | | don't clear out following packets on an eob ackMatt Ettus2010-11-111-1/+1
| | | * | | don't flag an error on eob ackMatt Ettus2010-11-111-1/+1
| | | * | | proper triggering for interrupts generated on the dsp_clkMatt Ettus2010-11-111-1/+8
| | | * | | cleanup for 32 bit seqnumMatt Ettus2010-11-111-4/+3
| | | * | | increase compatibility number for flow controlMatt Ettus2010-11-111-1/+1
| | | * | | switch to 32 bit sequence numbers. Will wrap in ~15 hours at max rateMatt Ettus2010-11-113-14/+16
| | | * | | send message on eob to ack the end of transmissionMatt Ettus2010-11-111-1/+6
| | | * | | typo which isn't caught by xilinxMatt Ettus2010-11-111-1/+1
| | | * | | separated flow control and error reporting on tx path. should work with and ...Matt Ettus2010-11-114-25/+43
| | | * | | go to the correct stateMatt Ettus2010-11-111-3/+3
| | | * | | add a fifo to the end of the mux to help in timing.Matt Ettus2010-11-111-6/+13
| | | * | | add trigger to makefileMatt Ettus2010-11-111-0/+1
| | | * | | assign setting reg addressesMatt Ettus2010-11-111-2/+2
| | | * | | declarationsMatt Ettus2010-11-111-2/+3
| | | * | | checkpoint in flow control packet generationMatt Ettus2010-11-115-42/+147
| | | * | | these got dropped during the rebaseMatt Ettus2010-11-114-31/+37
| | | * | | Removed 'ifdef for second DCM that was a deign idea for external SRAM on u2pl...Ian Buckley2010-11-111-49/+4
| | | * | | 1) Created new FIFO IP in Coregen. 512x36 dual clcok FIFO with programable fu...Ian Buckley2010-11-1111-11/+555
| | | * | | 1) u2p has added a new signal from the SRAM to the pinout, RAM_ZZIan Buckley2010-11-114-11/+17
| | | * | | Defaulted all SRAM pins to LVCMOS25 8mA FASTIan Buckley2010-11-111-67/+67
| | | * | | Placed 2nd DCM into `ifdef DCM_FOR_RAMCLK which is dissabled by defaultIan Buckley2010-11-112-7/+23
| | | * | | Added external RAM FIFO to u2plus.Ian Buckley2010-11-1120-100/+4498
| | | * | | revert unneeded changes and incorrect commentsMatt Ettus2010-11-112-34/+34
| | | * | | reconnect GPIOs, remove debug pins, meets timing nowMatt Ettus2010-11-111-5/+3
| | | * | | Modified phase shift of DCM1 to -64 which is intended to give more timing mar...Ian Buckley2010-11-111-1/+1
| | | * | | Enabled phase offset adjustment on DCM_INST1 which drives the external Fast S...Ian Buckley2010-11-111-12/+12
| | | * | | Added to DCM's and some BUFG's to align the internal 125MHz clock edge with i...Ian Buckley2010-11-114-5/+100
| | | * | | Enhanced test bench to be more like real world applicationIan Buckley2010-11-112-7/+14
| | | * | | hangedddddddextrnal fifo size to use full NoBL SRAMianb2010-11-111-1/+1
| | | * | | Corrected extfifo code so that all registers that are on SRAM signals are pac...ianb2010-11-115-46/+59
| | | * | | capacity logic fixMatt Ettus2010-11-111-1/+1
| | | * | | Added capacity to the module pinoutIan Buckley2010-11-111-3/+4
| | | * | | Added a bunch of debug signals.Ian Buckley2010-11-114-9/+19
| | | * | | Regenerated FIFO with lower trigger level for almost full flag to reflect log...Ian Buckley2010-11-118-236/+113
| | | * | | Regenerated FIFO's for extfifo.Ian Buckley2010-11-1111-726/+15
| | | * | | Edited FIFO instance to delete port that was not regenerated after reconfigur...Ian Buckley2010-11-111-1/+0
| | | * | | Adding in files that probably didn;t exist in the ISE10.1 version of coregenIan Buckley2010-11-115-0/+808
| | | * | | Bringing all coregen files checked in into syncIan Buckley2010-11-1110-137/+60
| | | * | | Found bug due to not accounting for the correct number of possible in flight ...Ian Buckley2010-11-117-52/+110
| | | * | | checkin of generated coregen filesMatt Ettus2010-11-1118-8/+556
| | | * | | External FIFO tested in simulation and on USRP2 from decimation 64->8 with cu...Ian Buckley2010-11-1118-236/+7297
| | | * | | Checkpoint checkin.Ian Buckley2010-11-1113-0/+1507
| | | * | | get it to buildMatt Ettus2010-11-115-5/+309
| | | * | | moved forward from the old branchMatt Ettus2010-11-118-4/+876
| | | * | | reverting part of the reversion of the spi settings.Matt Ettus2010-11-101-2/+2
| | | * | | u2p needs the bigger regs for some reasonMatt Ettus2010-11-101-4/+4
| | | * | | need to enable both 16 and 32 bit spi interfaces -- 16 used in u1e, 32 in u2 ...Matt Ettus2010-11-101-0/+1
| | | * | | occ needs to be 2 bits wide on a 36 bit fifo interface.Matt Ettus2010-11-101-1/+2
| | | * | | Merge branch 'u1e' into merge_u1eMatt Ettus2010-11-1064-215/+3325
| | | |\ \ \
| | | | * | | invert led signals because they are active lowMatt Ettus2010-11-091-1/+1
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 20:43:48 +0000