diff options
Diffstat (limited to 'usrp2')
| -rw-r--r-- | usrp2/top/safe_u1e/Makefile | 245 | ||||
| -rw-r--r-- | usrp2/top/safe_u1e/safe_u1e.v | 362 |
2 files changed, 607 insertions, 0 deletions
diff --git a/usrp2/top/safe_u1e/Makefile b/usrp2/top/safe_u1e/Makefile new file mode 100644 index 000000000..8fe77d554 --- /dev/null +++ b/usrp2/top/safe_u1e/Makefile @@ -0,0 +1,245 @@ +# +# Copyright 2008 Ettus Research LLC +# +# This file is part of GNU Radio +# +# GNU Radio is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3, or (at your option) +# any later version. +# +# GNU Radio is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Radio; see the file COPYING. If not, write to +# the Free Software Foundation, Inc., 51 Franklin Street, +# Boston, MA 02110-1301, USA. +# + +################################################## +# xtclsh Shell and tcl Script Path +################################################## +#XTCLSH := /opt/Xilinx/10.1/ISE/bin/lin/xtclsh +XTCLSH := xtclsh +ISE_HELPER := ../tcl/ise_helper.tcl + +################################################## +# Project Setup +################################################## +BUILD_DIR := build/ +export TOP_MODULE := safe_u1e +export PROJ_FILE := $(BUILD_DIR)$(TOP_MODULE).ise + +################################################## +# Project Properties +################################################## +export PROJECT_PROPERTIES := \ +family "Spartan-3A DSP" \ +device xc3sd1800a \ +package cs484 \ +speed -4 \ +top_level_module_type "HDL" \ +synthesis_tool "XST (VHDL/Verilog)" \ +simulator "ISE Simulator (VHDL/Verilog)" \ +"Preferred Language" "Verilog" \ +"Enable Message Filtering" FALSE \ +"Display Incremental Messages" FALSE + +################################################## +# Sources +################################################## +export SOURCE_ROOT := ../../../ +export SOURCES := \ +control_lib/CRC16_D16.v \ +control_lib/atr_controller.v \ +control_lib/bin2gray.v \ +control_lib/dcache.v \ +control_lib/decoder_3_8.v \ +control_lib/dpram32.v \ +control_lib/gray2bin.v \ +control_lib/gray_send.v \ +control_lib/icache.v \ +control_lib/mux4.v \ +control_lib/mux8.v \ +control_lib/nsgpio.v \ +control_lib/ram_2port.v \ +control_lib/ram_harv_cache.v \ +control_lib/ram_loader.v \ +control_lib/setting_reg.v \ +control_lib/settings_bus.v \ +control_lib/srl.v \ +control_lib/system_control.v \ +control_lib/wb_1master.v \ +control_lib/wb_readback_mux.v \ +control_lib/simple_uart.v \ +control_lib/simple_uart_tx.v \ +control_lib/simple_uart_rx.v \ +control_lib/oneshot_2clk.v \ +control_lib/sd_spi.v \ +control_lib/sd_spi_wb.v \ +control_lib/wb_bridge_16_32.v \ +control_lib/reset_sync.v \ +simple_gemac/simple_gemac_wrapper.v \ +simple_gemac/simple_gemac.v \ +simple_gemac/simple_gemac_wb.v \ +simple_gemac/simple_gemac_tx.v \ +simple_gemac/simple_gemac_rx.v \ +simple_gemac/crc.v \ +simple_gemac/delay_line.v \ +simple_gemac/flow_ctrl_tx.v \ +simple_gemac/flow_ctrl_rx.v \ +simple_gemac/address_filter.v \ +simple_gemac/ll8_to_txmac.v \ +simple_gemac/rxmac_to_ll8.v \ +simple_gemac/miim/eth_miim.v \ +simple_gemac/miim/eth_clockgen.v \ +simple_gemac/miim/eth_outputcontrol.v \ +simple_gemac/miim/eth_shiftreg.v \ +control_lib/newfifo/buffer_int.v \ +control_lib/newfifo/buffer_pool.v \ +control_lib/newfifo/fifo_2clock.v \ +control_lib/newfifo/fifo_2clock_cascade.v \ +control_lib/newfifo/ll8_shortfifo.v \ +control_lib/newfifo/ll8_to_fifo36.v \ +control_lib/newfifo/fifo_short.v \ +control_lib/newfifo/fifo_long.v \ +control_lib/newfifo/fifo_cascade.v \ +control_lib/newfifo/fifo36_to_ll8.v \ +control_lib/longfifo.v \ +control_lib/shortfifo.v \ +control_lib/medfifo.v \ +coregen/fifo_xlnx_2Kx36_2clk.v \ +coregen/fifo_xlnx_2Kx36_2clk.xco \ +coregen/fifo_xlnx_512x36_2clk.v \ +coregen/fifo_xlnx_512x36_2clk.xco \ +coregen/fifo_xlnx_64x36_2clk.v \ +coregen/fifo_xlnx_64x36_2clk.xco \ +extram/wb_zbt16_b.v \ +opencores/8b10b/decode_8b10b.v \ +opencores/8b10b/encode_8b10b.v \ +opencores/aemb/rtl/verilog/aeMB_bpcu.v \ +opencores/aemb/rtl/verilog/aeMB_core_BE.v \ +opencores/aemb/rtl/verilog/aeMB_ctrl.v \ +opencores/aemb/rtl/verilog/aeMB_edk32.v \ +opencores/aemb/rtl/verilog/aeMB_ibuf.v \ +opencores/aemb/rtl/verilog/aeMB_regf.v \ +opencores/aemb/rtl/verilog/aeMB_xecu.v \ +opencores/i2c/rtl/verilog/i2c_master_bit_ctrl.v \ +opencores/i2c/rtl/verilog/i2c_master_byte_ctrl.v \ +opencores/i2c/rtl/verilog/i2c_master_defines.v \ +opencores/i2c/rtl/verilog/i2c_master_top.v \ +opencores/i2c/rtl/verilog/timescale.v \ +opencores/simple_pic/rtl/simple_pic.v \ +opencores/spi/rtl/verilog/spi_clgen.v \ +opencores/spi/rtl/verilog/spi_defines.v \ +opencores/spi/rtl/verilog/spi_shift.v \ +opencores/spi/rtl/verilog/spi_top.v \ +opencores/spi/rtl/verilog/timescale.v \ +sdr_lib/acc.v \ +sdr_lib/add2.v \ +sdr_lib/add2_and_round.v \ +sdr_lib/add2_and_round_reg.v \ +sdr_lib/add2_reg.v \ +sdr_lib/cic_dec_shifter.v \ +sdr_lib/cic_decim.v \ +sdr_lib/cic_int_shifter.v \ +sdr_lib/cic_interp.v \ +sdr_lib/cic_strober.v \ +sdr_lib/clip.v \ +sdr_lib/clip_reg.v \ +sdr_lib/cordic.v \ +sdr_lib/cordic_z24.v \ +sdr_lib/cordic_stage.v \ +sdr_lib/dsp_core_rx.v \ +sdr_lib/dsp_core_tx.v \ +sdr_lib/hb_dec.v \ +sdr_lib/hb_interp.v \ +sdr_lib/round.v \ +sdr_lib/round_reg.v \ +sdr_lib/rx_control.v \ +sdr_lib/rx_dcoffset.v \ +sdr_lib/sign_extend.v \ +sdr_lib/small_hb_dec.v \ +sdr_lib/small_hb_int.v \ +sdr_lib/tx_control.v \ +serdes/serdes.v \ +serdes/serdes_fc_rx.v \ +serdes/serdes_fc_tx.v \ +serdes/serdes_rx.v \ +serdes/serdes_tx.v \ +timing/time_receiver.v \ +timing/time_sender.v \ +timing/time_sync.v \ +timing/timer.v \ +top/u2_core/u2_core.v \ +top/safe_u1e/u1e.ucf \ +top/safe_u1e/safe_u1e.v + +################################################## +# Process Properties +################################################## +export SYNTHESIZE_PROPERTIES := \ +"Number of Clock Buffers" 6 \ +"Pack I/O Registers into IOBs" Yes \ +"Optimization Effort" High \ +"Optimize Instantiated Primitives" TRUE \ +"Register Balancing" Yes \ +"Use Clock Enable" Auto \ +"Use Synchronous Reset" Auto \ +"Use Synchronous Set" Auto + +export TRANSLATE_PROPERTIES := \ +"Macro Search Path" "$(shell pwd)/../../coregen/" + +export MAP_PROPERTIES := \ +"Allow Logic Optimization Across Hierarchy" TRUE \ +"Map to Input Functions" 4 \ +"Optimization Strategy (Cover Mode)" Speed \ +"Pack I/O Registers/Latches into IOBs" "For Inputs and Outputs" \ +"Perform Timing-Driven Packing and Placement" TRUE \ +"Map Effort Level" High \ +"Extra Effort" Normal \ +"Combinatorial Logic Optimization" TRUE \ +"Register Duplication" TRUE + +export PLACE_ROUTE_PROPERTIES := \ +"Place & Route Effort Level (Overall)" High + +export STATIC_TIMING_PROPERTIES := \ +"Number of Paths in Error/Verbose Report" 10 \ +"Report Type" "Error Report" + +export GEN_PROG_FILE_PROPERTIES := \ +"Configuration Rate" 6 \ +"Create Binary Configuration File" TRUE \ +"Done (Output Events)" 5 \ +"Enable Bitstream Compression" TRUE \ +"Enable Outputs (Output Events)" 6 + +export SIM_MODEL_PROPERTIES := "" + +################################################## +# Make Options +################################################## +all: + @echo make proj, check, synth, bin, or clean + +proj: + PROCESS_RUN="" $(XTCLSH) $(ISE_HELPER) + +check: + PROCESS_RUN="Check Syntax" $(XTCLSH) $(ISE_HELPER) + +synth: + PROCESS_RUN="Synthesize - XST" $(XTCLSH) $(ISE_HELPER) + +bin: + PROCESS_RUN="Generate Programming File" $(XTCLSH) $(ISE_HELPER) + +clean: + rm -rf $(BUILD_DIR) + + diff --git a/usrp2/top/safe_u1e/safe_u1e.v b/usrp2/top/safe_u1e/safe_u1e.v new file mode 100644 index 000000000..c880a9e55 --- /dev/null +++ b/usrp2/top/safe_u1e/safe_u1e.v @@ -0,0 +1,362 @@ +`timescale 1ns / 1ps +////////////////////////////////////////////////////////////////////////////////// + +module safe_u1e + ( + input CLK_FPGA_P, input CLK_FPGA_N, // Diff + + // ADC + //input ADC_clkout_p, //input ADC_clkout_n, + //input ADCA_12_p, //input ADCA_12_n, + //input ADCA_10_p, //input ADCA_10_n, + //input ADCA_8_p, //input ADCA_8_n, + //input ADCA_6_p, //input ADCA_6_n, + //input ADCA_4_p, //input ADCA_4_n, + //input ADCA_2_p, //input ADCA_2_n, + //input ADCA_0_p, //input ADCA_0_n, + //input ADCB_12_p, //input ADCB_12_n, + //input ADCB_10_p, //input ADCB_10_n, + //input ADCB_8_p, //input ADCB_8_n, + //input ADCB_6_p, //input ADCB_6_n, + //input ADCB_4_p, //input ADCB_4_n, + //input ADCB_2_p, //input ADCB_2_n, + //input ADCB_0_p, //input ADCB_0_n, + + // DAC + //output [15:0] DACA, + //output [15:0] DACB, + //input DAC_LOCK, // unused for now + + // DB IO Pins + //inout [15:0] io_tx, + //inout [15:0] io_rx, + + // Misc, debug + output [5:1] leds, // LED4 is shared w/INIT_B + //input FPGA_RESET, + //output [1:0] debug_clk, + //output [31:0] debug, + //output [3:1] TXD, //input [3:1] RXD, // UARTs + ////input [3:0] dipsw, // Forgot DIP Switches... + + // Clock Gen Control + //output [1:0] clk_en, + //output [1:0] clk_sel, + //input CLK_FUNC, // FIXME is an //input to control the 9510 + //input CLK_STATUS, + + //inout SCL, //inout SDA, // I2C + + // PPS + //input PPS_IN, //input PPS2_IN, + + // SPI + //output SEN_CLK, //output SCLK_CLK, //output MOSI_CLK, //input MISO_CLK, + //output SEN_DAC, //output SCLK_DAC, //output MOSI_DAC, //input MISO_DAC, + //output SEN_ADC, //output SCLK_ADC, //output MOSI_ADC, + //output SEN_TX_DB, //output SCLK_TX_DB, //output MOSI_TX_DB, //input MISO_TX_DB, + //output SEN_TX_DAC, //output SCLK_TX_DAC, //output MOSI_TX_DAC, + //output SEN_TX_ADC, //output SCLK_TX_ADC, //output MOSI_TX_ADC, //input MISO_TX_ADC, + //output SEN_RX_DB, //output SCLK_RX_DB, //output MOSI_RX_DB, //input MISO_RX_DB, + //output SEN_RX_DAC, //output SCLK_RX_DAC, //output MOSI_RX_DAC, + //output SEN_RX_ADC, //output SCLK_RX_ADC, //output MOSI_RX_ADC, //input MISO_RX_ADC, + + // GigE PHY + //input CLK_TO_MAC, + + //output reg [7:0] GMII_TXD, + //output reg GMII_TX_EN, + //output reg GMII_TX_ER, + //output GMII_GTX_CLK, + //input GMII_TX_CLK, // 100mbps clk + + //input GMII_RX_CLK, + //input [7:0] GMII_RXD, + //input GMII_RX_DV, + //input GMII_RX_ER, + //input GMII_COL, + //input GMII_CRS, + + //input PHY_INTn, // open drain + //inout MDIO, + //output MDC, + //output PHY_RESETn, + output ETH_LED + + //input POR, + + // Expansion + //input exp_time_in_p, //input exp_time_in_n, // Diff + //output exp_time_out_p, //output exp_time_out_n, // Diff + //input exp_user_in_p, //input exp_user_in_n, // Diff + //output exp_user_out_p, //output exp_user_out_n, // Diff + + // SERDES + //output ser_enable, + //output ser_prbsen, + //output ser_loopen, + //output ser_rx_en, + + //output ser_tx_clk, + //output reg [15:0] ser_t, + //output reg ser_tklsb, + //output reg ser_tkmsb, + + //input ser_rx_clk, + //input [15:0] ser_r, + //input ser_rklsb, + //input ser_rkmsb, + + // SRAM + //inout [35:0] RAM_D, + //output [20:0] RAM_A, + //output [3:0] RAM_BWn, + //output RAM_ZZ, + //output RAM_LDn, + //output RAM_OEn, + //output RAM_WEn, + //output RAM_CENn, + //output RAM_CLK, + + // SPI Flash + //output flash_cs, + //output flash_clk, + //output flash_mosi, + //input flash_miso + ); + + // FPGA-specific pins connections + wire clk_fpga, dsp_clk, clk_div, dcm_out, wb_clk, clock_ready; + + IBUFGDS clk_fpga_pin (.O(clk_fpga),.I(CLK_FPGA_P),.IB(CLK_FPGA_N)); + defparam clk_fpga_pin.IOSTANDARD = "LVPECL_25"; + + reg [31:0] ctr; + + always @(posedge clk_fpga) + ctr <= ctr + 1; + + assign {leds,ETH_LED} = ~ctr[29:24]; + + +/* + wire exp_time_in; + IBUFDS exp_time_in_pin (.O(exp_time_in),.I(exp_time_in_p),.IB(exp_time_in_n)); + defparam exp_time_in_pin.IOSTANDARD = "LVDS_25"; + + wire exp_time_out; + OBUFDS exp_time_out_pin (.O(exp_time_out_p),.OB(exp_time_out_n),.I(exp_time_out)); + defparam exp_time_out_pin.IOSTANDARD = "LVDS_25"; + + wire dcm_rst = 0; + + wire [13:0] adc_a, adc_b; + + capture_ddrlvds #(.WIDTH(14)) capture_ddrlvds + (.clk(dsp_clk), .ssclk_p(ADC_clkout_p), .ssclk_n(ADC_clkout_n), + .in_p({{ADCA_12_p, ADCA_10_p, ADCA_8_p, ADCA_6_p, ADCA_4_p, ADCA_2_p, ADCA_0_p}, + {ADCB_12_p, ADCB_10_p, ADCB_8_p, ADCB_6_p, ADCB_4_p, ADCB_2_p, ADCB_0_p}}), + .in_n({{ADCA_12_n, ADCA_10_n, ADCA_8_n, ADCA_6_n, ADCA_4_n, ADCA_2_n, ADCA_0_n}, + {ADCB_12_n, ADCB_10_n, ADCB_8_n, ADCB_6_n, ADCB_4_n, ADCB_2_n, ADCB_0_n}}), + .out({adc_a,adc_b})); + + // Handle Clocks + DCM DCM_INST (.CLKFB(dsp_clk), + .CLKIN(clk_fpga), + .DSSEN(0), + .PSCLK(0), + .PSEN(0), + .PSINCDEC(0), + .RST(dcm_rst), + .CLKDV(clk_div), + .CLKFX(), + .CLKFX180(), + .CLK0(dcm_out), + .CLK2X(), + .CLK2X180(), + .CLK90(), + .CLK180(), + .CLK270(), + .LOCKED(LOCKED_OUT), + .PSDONE(), + .STATUS()); + defparam DCM_INST.CLK_FEEDBACK = "1X"; + defparam DCM_INST.CLKDV_DIVIDE = 2.0; + defparam DCM_INST.CLKFX_DIVIDE = 1; + defparam DCM_INST.CLKFX_MULTIPLY = 4; + defparam DCM_INST.CLKIN_DIVIDE_BY_2 = "FALSE"; + defparam DCM_INST.CLKIN_PERIOD = 10.000; + defparam DCM_INST.CLKOUT_PHASE_SHIFT = "NONE"; + defparam DCM_INST.DESKEW_ADJUST = "SYSTEM_SYNCHRONOUS"; + defparam DCM_INST.DFS_FREQUENCY_MODE = "LOW"; + defparam DCM_INST.DLL_FREQUENCY_MODE = "LOW"; + defparam DCM_INST.DUTY_CYCLE_CORRECTION = "TRUE"; + defparam DCM_INST.FACTORY_JF = 16'h8080; + defparam DCM_INST.PHASE_SHIFT = 0; + defparam DCM_INST.STARTUP_WAIT = "FALSE"; + + BUFG dspclk_BUFG (.I(dcm_out), .O(dsp_clk)); + BUFG wbclk_BUFG (.I(clk_div), .O(wb_clk)); + + // I2C -- Don't use external transistors for open drain, the FPGA implements this + IOBUF scl_pin(.O(scl_pad_i), .IO(SCL), .I(scl_pad_o), .T(scl_pad_oen_o)); + IOBUF sda_pin(.O(sda_pad_i), .IO(SDA), .I(sda_pad_o), .T(sda_pad_oen_o)); + + // LEDs are active low outputs + wire [4:0] leds_int; + assign leds = ~leds_int; // drive low to turn on leds + + // SPI + wire miso, mosi, sclk; + + assign {SCLK_CLK,MOSI_CLK} = ~SEN_CLK ? {sclk,mosi} : 2'B0; + assign {SCLK_DAC,MOSI_DAC} = ~SEN_DAC ? {sclk,mosi} : 2'B0; + assign {SCLK_ADC,MOSI_ADC} = ~SEN_ADC ? {sclk,mosi} : 2'B0; + assign {SCLK_TX_DB,MOSI_TX_DB} = ~SEN_TX_DB ? {sclk,mosi} : 2'B0; + assign {SCLK_TX_DAC,MOSI_TX_DAC} = ~SEN_TX_DAC ? {sclk,mosi} : 2'B0; + assign {SCLK_TX_ADC,MOSI_TX_ADC} = ~SEN_TX_ADC ? {sclk,mosi} : 2'B0; + assign {SCLK_RX_DB,MOSI_RX_DB} = ~SEN_RX_DB ? {sclk,mosi} : 2'B0; + assign {SCLK_RX_DAC,MOSI_RX_DAC} = ~SEN_RX_DAC ? {sclk,mosi} : 2'B0; + assign {SCLK_RX_ADC,MOSI_RX_ADC} = ~SEN_RX_ADC ? {sclk,mosi} : 2'B0; + + assign miso = (~SEN_CLK & MISO_CLK) | (~SEN_DAC & MISO_DAC) | + (~SEN_TX_DB & MISO_TX_DB) | (~SEN_TX_ADC & MISO_TX_ADC) | + (~SEN_RX_DB & MISO_RX_DB) | (~SEN_RX_ADC & MISO_RX_ADC); + + wire GMII_TX_EN_unreg, GMII_TX_ER_unreg; + wire [7:0] GMII_TXD_unreg; + wire GMII_GTX_CLK_int; + + always @(posedge GMII_GTX_CLK_int) + begin + GMII_TX_EN <= GMII_TX_EN_unreg; + GMII_TX_ER <= GMII_TX_ER_unreg; + GMII_TXD <= GMII_TXD_unreg; + end + + OFDDRRSE OFDDRRSE_gmii_inst + (.Q(GMII_GTX_CLK), // Data output (connect directly to top-level port) + .C0(GMII_GTX_CLK_int), // 0 degree clock input + .C1(~GMII_GTX_CLK_int), // 180 degree clock input + .CE(1), // Clock enable input + .D0(0), // Posedge data input + .D1(1), // Negedge data input + .R(0), // Synchronous reset input + .S(0) // Synchronous preset input + ); + + wire ser_tklsb_unreg, ser_tkmsb_unreg; + wire [15:0] ser_t_unreg; + wire ser_tx_clk_int; + + always @(posedge ser_tx_clk_int) + begin + ser_tklsb <= ser_tklsb_unreg; + ser_tkmsb <= ser_tkmsb_unreg; + ser_t <= ser_t_unreg; + end + + assign ser_tx_clk = clk_fpga; + + reg [15:0] ser_r_int; + reg ser_rklsb_int, ser_rkmsb_int; + + always @(posedge ser_rx_clk) + begin + ser_r_int <= ser_r; + ser_rklsb_int <= ser_rklsb; + ser_rkmsb_int <= ser_rkmsb; + end + + u2_core u2_core(.dsp_clk (dsp_clk), + .wb_clk (wb_clk), + .clock_ready (clock_ready), + .clk_to_mac (clk_to_mac), + .pps_in (pps_in), + .leds (leds_int), + .debug (debug[31:0]), + .debug_clk (debug_clk[1:0]), + .exp_pps_in (exp_time_in), + .exp_pps_out (exp_time_out), + .GMII_COL (GMII_COL), + .GMII_CRS (GMII_CRS), + .GMII_TXD (GMII_TXD_unreg[7:0]), + .GMII_TX_EN (GMII_TX_EN_unreg), + .GMII_TX_ER (GMII_TX_ER_unreg), + .GMII_GTX_CLK (GMII_GTX_CLK_int), + .GMII_TX_CLK (GMII_TX_CLK), + .GMII_RXD (GMII_RXD[7:0]), + .GMII_RX_CLK (GMII_RX_CLK), + .GMII_RX_DV (GMII_RX_DV), + .GMII_RX_ER (GMII_RX_ER), + .MDIO (MDIO), + .MDC (MDC), + .PHY_INTn (PHY_INTn), + .PHY_RESETn (PHY_RESETn), + .ser_enable (ser_enable), + .ser_prbsen (ser_prbsen), + .ser_loopen (ser_loopen), + .ser_rx_en (ser_rx_en), + .ser_tx_clk (ser_tx_clk_int), + .ser_t (ser_t_unreg[15:0]), + .ser_tklsb (ser_tklsb_unreg), + .ser_tkmsb (ser_tkmsb_unreg), + .ser_rx_clk (ser_rx_clk), + .ser_r (ser_r_int[15:0]), + .ser_rklsb (ser_rklsb_int), + .ser_rkmsb (ser_rkmsb_int), + .cpld_start (cpld_start), + .cpld_mode (cpld_mode), + .cpld_done (cpld_done), + .cpld_din (cpld_din), + .cpld_clk (cpld_clk), + .cpld_detached (cpld_detached), + .adc_a (adc_a[13:0]), + .adc_ovf_a (adc_ovf_a), + .adc_on_a (adc_on_a), + .adc_oe_a (adc_oe_a), + .adc_b (adc_b[13:0]), + .adc_ovf_b (adc_ovf_b), + .adc_on_b (adc_on_b), + .adc_oe_b (adc_oe_b), + .dac_a (DACA[15:0]), + .dac_b (DACB[15:0]), + .scl_pad_i (scl_pad_i), + .scl_pad_o (scl_pad_o), + .scl_pad_oen_o (scl_pad_oen_o), + .sda_pad_i (sda_pad_i), + .sda_pad_o (sda_pad_o), + .sda_pad_oen_o (sda_pad_oen_o), + .clk_en (clk_en[1:0]), + .clk_sel (clk_sel[1:0]), + .clk_func (clk_func), + .clk_status (clk_status), + .sclk (sclk_int), + .mosi (mosi), + .miso (miso), + .sen_clk (sen_clk), + .sen_dac (sen_dac), + .sen_tx_db (sen_tx_db), + .sen_tx_adc (sen_tx_adc), + .sen_tx_dac (sen_tx_dac), + .sen_rx_db (sen_rx_db), + .sen_rx_adc (sen_rx_adc), + .sen_rx_dac (sen_rx_dac), + .io_tx (io_tx[15:0]), + .io_rx (io_rx[15:0]), + .RAM_D (RAM_D), + .RAM_A (RAM_A), + .RAM_CE1n (RAM_CE1n), + .RAM_CENn (RAM_CENn), + .RAM_CLK (RAM_CLK), + .RAM_WEn (RAM_WEn), + .RAM_OEn (RAM_OEn), + .RAM_LDn (RAM_LDn), + .uart_tx_o (uart_tx_o), + .uart_rx_i (uart_rx_i), + .uart_baud_o (), + .sim_mode (1'b0), + .clock_divider (2) + ); +*/ +endmodule // safe_u2plus |