diff options
Diffstat (limited to 'usrp2/udp/prot_eng_tx.v')
-rw-r--r-- | usrp2/udp/prot_eng_tx.v | 28 |
1 files changed, 16 insertions, 12 deletions
diff --git a/usrp2/udp/prot_eng_tx.v b/usrp2/udp/prot_eng_tx.v index 06ae166ba..b86a9950c 100644 --- a/usrp2/udp/prot_eng_tx.v +++ b/usrp2/udp/prot_eng_tx.v @@ -35,7 +35,7 @@ module prot_eng_tx assign dst_rdy_o = dst_rdy_i & (do_payload | (state==0) | (state==1) | (state==30)); assign src_rdy_o = src_rdy_i & ~((state==0) | (state==1) | (state==30)); - localparam HDR_WIDTH = 16 + 5; // 16 bits plus flags + localparam HDR_WIDTH = 16 + 6; // 16 bits plus flags localparam HDR_LEN = 32; // Up to 64 bytes of protocol // Store header values in a small dual-port (distributed) ram @@ -43,11 +43,12 @@ module prot_eng_tx wire [HDR_WIDTH-1:0] header_word; reg [1:0] port_sel; - reg [15:0] per_port_data[0:3]; - reg [15:0] udp_port, chk_precompute; + reg [32:0] per_port_data[0:3]; + reg [15:0] udp_src_port, udp_dst_port, chk_precompute; + + always @(posedge clk) udp_src_port <= per_port_data[port_sel][31:16]; + always @(posedge clk) udp_dst_port <= per_port_data[port_sel][15:0]; - always @(posedge clk) udp_port <= per_port_data[port_sel]; - always @(posedge clk) if(set_stb & ((set_addr & 8'hE0) == BASE)) begin @@ -60,11 +61,12 @@ module prot_eng_tx if(set_stb & ((set_addr & 8'hFC) == (BASE+24))) per_port_data[set_addr[1:0]] <= set_data; - wire do_udp_port = header_word[20]; - wire last_hdr_line = header_word[19]; - wire do_ip_chk = header_word[18]; - wire do_ip_len = header_word[17]; - wire do_udp_len = header_word[16]; + wire do_udp_src_port = header_word[21]; + wire do_udp_dst_port = header_word[20]; + wire last_hdr_line = header_word[19]; + wire do_ip_chk = header_word[18]; + wire do_ip_len = header_word[17]; + wire do_udp_len = header_word[16]; assign header_word = header_ram[state]; @@ -133,8 +135,10 @@ module prot_eng_tx dataout_int <= ip_length; else if(do_udp_len) dataout_int <= udp_length; - else if(do_udp_port) - dataout_int <= udp_port; + else if(do_udp_src_port) + dataout_int <= udp_src_port; + else if(do_udp_dst_port) + dataout_int <= udp_dst_port; else dataout_int <= header_word[15:0]; |