aboutsummaryrefslogtreecommitdiffstats
path: root/usrp2/top/u2plus/u2plus_core.v
diff options
context:
space:
mode:
Diffstat (limited to 'usrp2/top/u2plus/u2plus_core.v')
-rw-r--r--usrp2/top/u2plus/u2plus_core.v95
1 files changed, 43 insertions, 52 deletions
diff --git a/usrp2/top/u2plus/u2plus_core.v b/usrp2/top/u2plus/u2plus_core.v
index 049f3088a..d5a91de7f 100644
--- a/usrp2/top/u2plus/u2plus_core.v
+++ b/usrp2/top/u2plus/u2plus_core.v
@@ -131,15 +131,19 @@ module u2plus_core
output spiflash_cs, output spiflash_clk, input spiflash_miso, output spiflash_mosi
);
- localparam SR_BUF_POOL = 64; // router
+ localparam SR_MISC = 0; // Uses 9 regs
+ localparam SR_BUF_POOL = 64; // Uses 4 regs
localparam SR_UDP_SM = 96; // 64 regs
- localparam SR_RX_DSP = 160; // 16
- localparam SR_RX_CTRL = 176; // 16
+ localparam SR_RX_DSP0 = 160; // 16
+ localparam SR_RX_CTRL0 = 176; // 16
localparam SR_TIME64 = 192; // 3
localparam SR_SIMTIMER = 198; // 2
localparam SR_TX_DSP = 208; // 16
localparam SR_TX_CTRL = 224; // 16
-
+ localparam SR_RX_DSP1 = 240;
+ localparam SR_RX_CTRL1 = 32;
+
+
// FIFO Sizes, 9 = 512 lines, 10 = 1024, 11 = 2048
// all (most?) are 36 bits wide, so 9 is 1 BRAM, 10 is 2, 11 is 4 BRAMs
localparam DSP_TX_FIFOSIZE = 10;
@@ -164,7 +168,7 @@ module u2plus_core
wire [31:0] atr_lines;
wire [31:0] debug_rx, debug_mac, debug_mac0, debug_mac1, debug_tx_dsp, debug_txc,
- debug_serdes0, debug_serdes1, debug_serdes2, debug_rx_dsp, debug_udp;
+ debug_serdes0, debug_serdes1, debug_serdes2, debug_rx_dsp, debug_udp, debug_extfifo, debug_extfifo2;
wire [15:0] ser_rx_occ, ser_tx_occ, dsp_rx_occ, dsp_tx_occ, eth_rx_occ, eth_tx_occ, eth_rx_occ2;
wire ser_rx_full, ser_tx_full, dsp_rx_full, dsp_tx_full, eth_rx_full, eth_tx_full, eth_rx_full2;
@@ -341,15 +345,13 @@ module u2plus_core
wire rd1_ready_i, rd1_ready_o;
wire rd2_ready_i, rd2_ready_o;
wire rd3_ready_i, rd3_ready_o;
- wire [3:0] rd0_flags, rd1_flags, rd2_flags, rd3_flags;
- wire [31:0] rd0_dat, rd1_dat, rd2_dat, rd3_dat;
+ wire [35:0] rd0_dat, rd1_dat, rd2_dat, rd3_dat;
wire wr0_ready_i, wr0_ready_o;
wire wr1_ready_i, wr1_ready_o;
wire wr2_ready_i, wr2_ready_o;
wire wr3_ready_i, wr3_ready_o;
- wire [3:0] wr0_flags, wr1_flags, wr2_flags, wr3_flags;
- wire [31:0] wr0_dat, wr1_dat, wr2_dat, wr3_dat;
+ wire [35:0] wr0_dat, wr1_dat, wr2_dat, wr3_dat;
wire [35:0] tx_err_data;
wire tx_err_src_rdy, tx_err_dst_rdy;
@@ -367,15 +369,15 @@ module u2plus_core
.status(status), .sys_int_o(buffer_int), .debug(router_debug),
- .ser_inp_data({wr0_flags, wr0_dat}), .ser_inp_valid(wr0_ready_i), .ser_inp_ready(wr0_ready_o),
- .dsp0_inp_data({wr1_flags, wr1_dat}), .dsp0_inp_valid(wr1_ready_i), .dsp0_inp_ready(wr1_ready_o),
- .dsp1_inp_data({wr3_flags, wr1_dat}), .dsp1_inp_valid(wr3_ready_i), .dsp1_inp_ready(wr3_ready_o),
- .eth_inp_data({wr2_flags, wr2_dat}), .eth_inp_valid(wr2_ready_i), .eth_inp_ready(wr2_ready_o),
+ .ser_inp_data(wr0_dat), .ser_inp_valid(wr0_ready_i), .ser_inp_ready(wr0_ready_o),
+ .dsp0_inp_data(wr1_dat), .dsp0_inp_valid(wr1_ready_i), .dsp0_inp_ready(wr1_ready_o),
+ .dsp1_inp_data(wr3_dat), .dsp1_inp_valid(wr3_ready_i), .dsp1_inp_ready(wr3_ready_o),
+ .eth_inp_data(wr2_dat), .eth_inp_valid(wr2_ready_i), .eth_inp_ready(wr2_ready_o),
.err_inp_data(tx_err_data), .err_inp_ready(tx_err_dst_rdy), .err_inp_valid(tx_err_src_rdy),
- .ser_out_data({rd0_flags, rd0_dat}), .ser_out_valid(rd0_ready_o), .ser_out_ready(rd0_ready_i),
- .dsp_out_data({rd1_flags, rd1_dat}), .dsp_out_valid(rd1_ready_o), .dsp_out_ready(rd1_ready_i),
- .eth_out_data({rd2_flags, rd2_dat}), .eth_out_valid(rd2_ready_o), .eth_out_ready(rd2_ready_i)
+ .ser_out_data(rd0_dat), .ser_out_valid(rd0_ready_o), .ser_out_ready(rd0_ready_i),
+ .dsp_out_data(rd1_dat), .dsp_out_valid(rd1_ready_o), .dsp_out_ready(rd1_ready_i),
+ .eth_out_data(rd2_dat), .eth_out_valid(rd2_ready_o), .eth_out_ready(rd2_ready_i)
);
// /////////////////////////////////////////////////////////////////////////
@@ -416,7 +418,7 @@ module u2plus_core
wb_readback_mux buff_pool_status
(.wb_clk_i(wb_clk), .wb_rst_i(wb_rst), .wb_stb_i(s5_stb),
.wb_adr_i(s5_adr), .wb_dat_o(s5_dat_i), .wb_ack_o(s5_ack),
-
+
.word00(32'b0),.word01(32'b0),.word02(32'b0),.word03(32'b0),
.word04(32'b0),.word05(32'b0),.word06(32'b0),.word07(32'b0),
.word08(status),.word09({sim_mode,27'b0,clock_divider[3:0]}),.word10(vita_time[63:32]),
@@ -464,19 +466,19 @@ module u2plus_core
fifo_cascade #(.WIDTH(36), .SIZE(ETH_RX_FIFOSIZE)) rx_eth_fifo
(.clk(dsp_clk), .reset(dsp_rst), .clear(0),
.datain(rx_f36_data), .src_rdy_i(rx_f36_src_rdy), .dst_rdy_o(rx_f36_dst_rdy),
- .dataout({wr2_flags,wr2_dat}), .src_rdy_o(wr2_ready_i), .dst_rdy_i(wr2_ready_o));
+ .dataout(wr2_dat), .src_rdy_o(wr2_ready_i), .dst_rdy_i(wr2_ready_o));
//eth output to mac tx...
fifo_cascade #(.WIDTH(36), .SIZE(ETH_TX_FIFOSIZE)) tx_eth_fifo
(.clk(dsp_clk), .reset(dsp_rst), .clear(0),
- .datain({rd2_flags,rd2_dat}), .src_rdy_i(rd2_ready_o), .dst_rdy_o(rd2_ready_i),
+ .datain(rd2_dat), .src_rdy_i(rd2_ready_o), .dst_rdy_o(rd2_ready_i),
.dataout(tx_f36_data), .src_rdy_o(tx_f36_src_rdy), .dst_rdy_i(tx_f36_dst_rdy));
fifo36_to_fifo19 eth_out_fifo36_to_fifo19
(.clk(dsp_clk), .reset(dsp_rst), .clear(0),
.f36_datain(tx_f36_data), .f36_src_rdy_i(tx_f36_src_rdy), .f36_dst_rdy_o(tx_f36_dst_rdy),
.f19_dataout(tx_f19_data), .f19_src_rdy_o(tx_f19_src_rdy), .f19_dst_rdy_i(tx_f19_dst_rdy) );
-
+
// /////////////////////////////////////////////////////////////////////////
// Settings Bus -- Slave #7
settings_bus settings_bus
@@ -499,15 +501,15 @@ module u2plus_core
wire phy_reset;
assign PHY_RESETn = ~phy_reset;
- setting_reg #(.my_addr(0),.width(8)) sr_clk (.clk(wb_clk),.rst(wb_rst),.strobe(s7_ack),.addr(set_addr),
+ setting_reg #(.my_addr(SR_MISC+0),.width(8)) sr_clk (.clk(wb_clk),.rst(wb_rst),.strobe(s7_ack),.addr(set_addr),
.in(set_data),.out(clock_outs),.changed());
- setting_reg #(.my_addr(1),.width(8)) sr_ser (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr),
+ setting_reg #(.my_addr(SR_MISC+1),.width(8)) sr_ser (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr),
.in(set_data),.out(serdes_outs),.changed());
- setting_reg #(.my_addr(2),.width(8)) sr_adc (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr),
+ setting_reg #(.my_addr(SR_MISC+2),.width(8)) sr_adc (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr),
.in(set_data),.out(adc_outs),.changed());
- setting_reg #(.my_addr(4),.width(1)) sr_phy (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr),
+ setting_reg #(.my_addr(SR_MISC+4),.width(1)) sr_phy (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr),
.in(set_data),.out(phy_reset),.changed());
- setting_reg #(.my_addr(5),.width(1)) sr_bldr (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr),
+ setting_reg #(.my_addr(SR_MISC+5),.width(1)) sr_bldr (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr),
.in(set_data),.out(bldr_done),.changed());
// /////////////////////////////////////////////////////////////////////////
@@ -519,10 +521,10 @@ module u2plus_core
wire [7:0] led_src, led_sw;
wire [7:0] led_hw = {run_tx, run_rx, clk_status, serdes_link_up, 1'b0};
- setting_reg #(.my_addr(3),.width(8)) sr_led (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr),
+ setting_reg #(.my_addr(SR_MISC+3),.width(8)) sr_led (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr),
.in(set_data),.out(led_sw),.changed());
- setting_reg #(.my_addr(8),.width(8), .at_reset(8'b0001_1110))
+ setting_reg #(.my_addr(SR_MISC+8),.width(8), .at_reset(8'b0001_1110))
sr_led_src (.clk(wb_clk),.rst(wb_rst), .strobe(set_stb),.addr(set_addr), .in(set_data),.out(led_src),.changed());
assign leds = (led_src & led_hw) | (~led_src & led_sw);
@@ -606,50 +608,39 @@ module u2plus_core
.sclk_pad_o(spiflash_clk),.mosi_pad_o(spiflash_mosi),.miso_pad_i(spiflash_miso) );
// /////////////////////////////////////////////////////////////////////////
- // DSP RX
+ // DSP RX 0
wire [31:0] sample_rx, sample_tx;
wire strobe_rx, strobe_tx;
wire rx_dst_rdy, rx_src_rdy, rx1_dst_rdy, rx1_src_rdy;
- wire [99:0] rx_data;
wire [35:0] rx1_data;
- dsp_core_rx #(.BASE(SR_RX_DSP)) dsp_core_rx
+ dsp_core_rx #(.BASE(SR_RX_DSP0)) dsp_core_rx
(.clk(dsp_clk),.rst(dsp_rst),
.set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp),
.adc_a(adc_a),.adc_ovf_a(adc_ovf_a),.adc_b(adc_b),.adc_ovf_b(adc_ovf_b),
.sample(sample_rx), .run(run_rx_d1), .strobe(strobe_rx),
.debug(debug_rx_dsp) );
- wire [31:0] vrc_debug;
+ wire [31:0] vr_debug;
wire clear_rx;
- setting_reg #(.my_addr(SR_RX_CTRL+3)) sr_clear
+ setting_reg #(.my_addr(SR_RX_CTRL0+3)) sr_clear
(.clk(dsp_clk),.rst(dsp_rst),
.strobe(set_stb_dsp),.addr(set_addr_dsp),.in(set_data_dsp),
.out(),.changed(clear_rx));
- vita_rx_control #(.BASE(SR_RX_CTRL), .WIDTH(32)) vita_rx_control
+ vita_rx_chain #(.BASE(SR_RX_CTRL0)) vita_rx_chain0
(.clk(dsp_clk), .reset(dsp_rst), .clear(clear_rx),
.set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp),
.vita_time(vita_time), .overrun(overrun),
.sample(sample_rx), .run(run_rx), .strobe(strobe_rx),
- .sample_fifo_o(rx_data), .sample_fifo_dst_rdy_i(rx_dst_rdy), .sample_fifo_src_rdy_o(rx_src_rdy),
- .debug_rx(vrc_debug));
-
- wire [3:0] vita_state;
-
- vita_rx_framer #(.BASE(SR_RX_CTRL), .MAXCHAN(1)) vita_rx_framer
- (.clk(dsp_clk), .reset(dsp_rst), .clear(clear_rx),
- .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp),
- .sample_fifo_i(rx_data), .sample_fifo_dst_rdy_o(rx_dst_rdy), .sample_fifo_src_rdy_i(rx_src_rdy),
- .data_o(rx1_data), .dst_rdy_i(rx1_dst_rdy), .src_rdy_o(rx1_src_rdy),
- .fifo_occupied(), .fifo_full(), .fifo_empty(),
- .debug_rx(vita_state) );
+ .rx_data_o(rx0_data), .rx_src_rdy_o(rx0_src_rdy), .rx_dst_rdy_i(rx0_dst_rdy),
+ .debug(vr_debug) );
fifo_cascade #(.WIDTH(36), .SIZE(DSP_RX_FIFOSIZE)) rx_fifo_cascade
(.clk(dsp_clk), .reset(dsp_rst), .clear(clear_rx),
- .datain(rx1_data), .src_rdy_i(rx1_src_rdy), .dst_rdy_o(rx1_dst_rdy),
- .dataout({wr1_flags,wr1_dat}), .src_rdy_o(wr1_ready_i), .dst_rdy_i(wr1_ready_o));
+ .datain(rx0_data), .src_rdy_i(rx0_src_rdy), .dst_rdy_o(rx0_dst_rdy),
+ .dataout(wr1_dat), .src_rdy_o(wr1_ready_i), .dst_rdy_i(wr1_ready_o));
// ///////////////////////////////////////////////////////////////////////////////////
// DSP TX
@@ -679,7 +670,7 @@ module u2plus_core
.RAM_LDn(RAM_LDn),
.RAM_OEn(RAM_OEn),
.RAM_CE1n(RAM_CE1n),
- .datain({rd1_flags[3:2],rd1_dat[31:16],rd1_flags[1:0],rd1_dat[15:0]}),
+ .datain({rd1_dat[35:34],rd1_dat[31:16],rd1_dat[33:32],rd1_dat[15:0]}),
.src_rdy_i(rd1_ready_o),
.dst_rdy_o(rd1_ready_i),
.dataout({tx_data[35:34],tx_data[31:16],tx_data[33:32],tx_data[15:0]}),
@@ -710,9 +701,9 @@ module u2plus_core
serdes #(.TXFIFOSIZE(SERDES_TX_FIFOSIZE),.RXFIFOSIZE(SERDES_RX_FIFOSIZE)) serdes
(.clk(dsp_clk),.rst(dsp_rst),
.ser_tx_clk(ser_tx_clk),.ser_t(ser_t),.ser_tklsb(ser_tklsb),.ser_tkmsb(ser_tkmsb),
- .rd_dat_i(rd0_dat),.rd_flags_i(rd0_flags),.rd_ready_o(rd0_ready_i),.rd_ready_i(rd0_ready_o),
+ .rd_dat_i(rd0_dat[31:0]),.rd_flags_i(rd0_dat[35:32]),.rd_ready_o(rd0_ready_i),.rd_ready_i(rd0_ready_o),
.ser_rx_clk(ser_rx_clk),.ser_r(ser_r),.ser_rklsb(ser_rklsb),.ser_rkmsb(ser_rkmsb),
- .wr_dat_o(wr0_dat),.wr_flags_o(wr0_flags),.wr_ready_o(wr0_ready_i),.wr_ready_i(wr0_ready_o),
+ .wr_dat_o(wr0_dat[31:0]),.wr_flags_o(wr0_dat[35:32]),.wr_ready_o(wr0_ready_i),.wr_ready_i(wr0_ready_o),
.tx_occupied(ser_tx_occ),.tx_full(ser_tx_full),.tx_empty(ser_tx_empty),
.rx_occupied(ser_rx_occ),.rx_full(ser_rx_full),.rx_empty(ser_rx_empty),
.serdes_link_up(serdes_link_up),.debug0(debug_serdes0), .debug1(debug_serdes1) );
@@ -721,13 +712,13 @@ module u2plus_core
// VITA Timing
wire [31:0] debug_sync;
-
+
time_64bit #(.TICKS_PER_SEC(32'd100000000),.BASE(SR_TIME64)) time_64bit
(.clk(dsp_clk), .rst(dsp_rst), .set_stb(set_stb_dsp), .set_addr(set_addr_dsp), .set_data(set_data_dsp),
.pps(pps_in), .vita_time(vita_time), .vita_time_pps(vita_time_pps), .pps_int(pps_int),
.exp_time_in(exp_time_in), .exp_time_out(exp_time_out),
.debug(debug_sync));
-
+
// /////////////////////////////////////////////////////////////////////////////////////////
// Debug Pins