diff options
Diffstat (limited to 'usrp2/top/N2x0')
| -rw-r--r-- | usrp2/top/N2x0/u2plus_core.v | 36 |
1 files changed, 20 insertions, 16 deletions
diff --git a/usrp2/top/N2x0/u2plus_core.v b/usrp2/top/N2x0/u2plus_core.v index fc54bbbe9..2c547a245 100644 --- a/usrp2/top/N2x0/u2plus_core.v +++ b/usrp2/top/N2x0/u2plus_core.v @@ -483,16 +483,20 @@ module u2plus_core wire phy_reset; assign PHY_RESETn = ~phy_reset; - setting_reg #(.my_addr(SR_MISC+0),.width(8)) sr_clk (.clk(wb_clk),.rst(wb_rst),.strobe(s7_ack),.addr(set_addr), - .in(set_data),.out(clock_outs),.changed()); - setting_reg #(.my_addr(SR_MISC+1),.width(8)) sr_ser (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(serdes_outs),.changed()); - setting_reg #(.my_addr(SR_MISC+2),.width(8)) sr_adc (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(adc_outs),.changed()); - setting_reg #(.my_addr(SR_MISC+4),.width(1)) sr_phy (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(phy_reset),.changed()); - setting_reg #(.my_addr(SR_MISC+5),.width(1)) sr_bld (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(bldr_done),.changed()); + setting_reg #(.my_addr(SR_MISC+0),.width(8)) sr_clk + (.clk(wb_clk),.rst(wb_rst),.strobe(s7_ack),.addr(set_addr),.in(set_data),.out(clock_outs),.changed()); + + setting_reg #(.my_addr(SR_MISC+1),.width(8)) sr_ser + (.clk(dsp_clk),.rst(dsp_rst),.strobe(set_stb_dsp),.addr(set_addr_dsp),.in(set_data_dsp),.out(serdes_outs),.changed()); + + setting_reg #(.my_addr(SR_MISC+2),.width(8)) sr_adc + (.clk(dsp_clk),.rst(dsp_rst),.strobe(set_stb_dsp),.addr(set_addr_dsp),.in(set_data_dsp),.out(adc_outs),.changed()); + + setting_reg #(.my_addr(SR_MISC+4),.width(1)) sr_phy + (.clk(dsp_clk),.rst(dsp_rst),.strobe(set_stb_dsp),.addr(set_addr_dsp),.in(set_data_dsp),.out(phy_reset),.changed()); + + setting_reg #(.my_addr(SR_MISC+5),.width(1)) sr_bld + (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr),.in(set_data),.out(bldr_done),.changed()); // ///////////////////////////////////////////////////////////////////////// // LEDS @@ -503,11 +507,11 @@ module u2plus_core wire [7:0] led_src, led_sw; wire [7:0] led_hw = {run_tx, (run_rx0_d1 | run_rx1_d1), clk_status, serdes_link_up & good_sync, 1'b0}; - setting_reg #(.my_addr(SR_MISC+3),.width(8)) sr_led (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(led_sw),.changed()); + setting_reg #(.my_addr(SR_MISC+3),.width(8)) sr_led + (.clk(dsp_clk),.rst(dsp_rst),.strobe(set_stb_dsp),.addr(set_addr_dsp),.in(set_data_dsp),.out(led_sw),.changed()); - setting_reg #(.my_addr(SR_MISC+6),.width(8), .at_reset(8'b0001_1110)) - sr_led_src (.clk(wb_clk),.rst(wb_rst), .strobe(set_stb),.addr(set_addr), .in(set_data),.out(led_src),.changed()); + setting_reg #(.my_addr(SR_MISC+6),.width(8), .at_reset(8'b0001_1110)) sr_led_src + (.clk(dsp_clk),.rst(dsp_rst),.strobe(set_stb_dsp),.addr(set_addr_dsp), .in(set_data_dsp),.out(led_src),.changed()); assign leds = (led_src & led_hw) | (~led_src & led_sw); @@ -631,8 +635,8 @@ module u2plus_core wire clear_tx; setting_reg #(.my_addr(SR_TX_CTRL+1)) sr_clear_tx - (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(),.changed(clear_tx)); + (.clk(dsp_clk),.rst(dsp_rst),.strobe(set_stb_dsp),.addr(set_addr_dsp), + .in(set_data_dsp),.out(),.changed(clear_tx)); assign RAM_A[20:18] = 3'b0; |