diff options
Diffstat (limited to 'usrp2/top/B100/u1plus_core.v')
| -rw-r--r-- | usrp2/top/B100/u1plus_core.v | 17 |
1 files changed, 9 insertions, 8 deletions
diff --git a/usrp2/top/B100/u1plus_core.v b/usrp2/top/B100/u1plus_core.v index 4b26ae0ca..3c861fe08 100644 --- a/usrp2/top/B100/u1plus_core.v +++ b/usrp2/top/B100/u1plus_core.v @@ -63,7 +63,8 @@ module u1plus_core wire pps_int; wire [63:0] vita_time, vita_time_pps; - reg [15:0] reg_leds, reg_cgen_ctrl, reg_test, xfer_rate; + reg [15:0] reg_leds, reg_cgen_ctrl, reg_test; + wire [15:0] xfer_rate = 0; wire [7:0] test_rate; wire [3:0] test_ctrl; @@ -108,7 +109,6 @@ module u1plus_core wire tx_src_rdy, tx_dst_rdy, rx_src_rdy, rx_dst_rdy, tx_err_src_rdy, tx_err_dst_rdy; - wire bus_error; wire clear_tx, clear_rx; setting_reg #(.my_addr(SR_CLEAR_RX_FIFO), .width(1)) sr_clear_rx @@ -332,8 +332,8 @@ module u1plus_core reg_test <= s0_dat_mosi; REG_RX_FRAMELEN : frames_per_packet <= s0_dat_mosi[7:0]; - REG_XFER_RATE : - xfer_rate <= s0_dat_mosi; + //REG_XFER_RATE : + //xfer_rate <= s0_dat_mosi; endcase // case (s0_adr[6:0]) assign test_ctrl = xfer_rate[11:8]; @@ -355,14 +355,16 @@ module u1plus_core // ///////////////////////////////////////////////////////////////////////////////////// // Slave 1, UART // depth of 3 is 128 entries, clkdiv of 278 gives 230.4k with a 64 MHz system clock - + +/* simple_uart #(.TXDEPTH(3),.RXDEPTH(3), .CLKDIV_DEFAULT(278)) uart (.clk_i(wb_clk),.rst_i(wb_rst), .we_i(s1_we),.stb_i(s1_stb),.cyc_i(s1_cyc),.ack_o(s1_ack), .adr_i(s1_adr[3:1]),.dat_i({16'd0,s1_dat_mosi}),.dat_o(s1_dat_miso), .rx_int_o(),.tx_int_o(), .tx_o(debug_txd),.rx_i(debug_rxd),.baud_o()); - +*/ + // ///////////////////////////////////////////////////////////////////////////////////// // Slave 2, SPI @@ -456,9 +458,8 @@ module u1plus_core // Debug circuitry assign debug_clk = { gpif_clk, clk_fpga }; - assign debug = debug0; + assign debug = 0; assign debug_gpio_0 = 0; assign debug_gpio_1 = 0; - //assign {io_tx,io_rx} = {debug1}; endmodule // u1plus_core |