diff options
Diffstat (limited to 'simple_gemac/flow_ctrl_rx.v')
| -rw-r--r-- | simple_gemac/flow_ctrl_rx.v | 105 |
1 files changed, 40 insertions, 65 deletions
diff --git a/simple_gemac/flow_ctrl_rx.v b/simple_gemac/flow_ctrl_rx.v index 7ded9e08b..b13334d0e 100644 --- a/simple_gemac/flow_ctrl_rx.v +++ b/simple_gemac/flow_ctrl_rx.v @@ -2,84 +2,59 @@ // RX side of flow control -- when we are running out of RX space, send a PAUSE
module flow_ctrl_rx
- (input rst,
- //host processor
- input pause_frame_send_en,
- input [15:0] pause_quanta_set,
- input [15:0] fc_hwmark,
- input [15:0] fc_lwmark,
- // From MAC_rx_ctrl
- input rx_clk,
- input [15:0] rx_fifo_space,
- // MAC_tx_ctrl
- input tx_clk,
- output reg xoff_gen,
- output reg xon_gen,
- input xoff_gen_complete,
- input xon_gen_complete
+ (input pause_request_en, input [15:0] pause_time, input [15:0] pause_thresh,
+ input rx_clk, input rx_reset, input [15:0] rx_fifo_space,
+ input tx_clk, input tx_reset, output reg pause_req, output reg [15:0] pause_time_req
);
// ******************************************************************************
// Force our TX to send a PAUSE frame because our RX is nearly full
// ******************************************************************************
- reg xon_int, xoff_int;
+ // RX Clock Domain
+ reg xon, xoff;
reg [21:0] countdown;
-
- always @(posedge rx_clk or posedge rst)
- if(rst)
- begin
- xon_int <= 0;
- xoff_int <= 0;
- end
- else
- begin
- xon_int <= 0;
- xoff_int <= 0;
- if(pause_frame_send_en)
- if(countdown == 0)
- if(rx_fifo_space < fc_lwmark)
- xoff_int <= 1;
- else
- ;
- else
- if(rx_fifo_space > fc_hwmark)
- xon_int <= 1;
- end // else: !if(rst)
-
- reg xoff_int_d1, xon_int_d1;
- always @(posedge rx_clk)
- xon_int_d1 <= xon_int;
- always @(posedge rx_clk)
- xoff_int_d1 <= xoff_int;
+ wire [15:0] pause_low_thresh = pause_thresh;
+ wire [15:0] pause_hi_thresh = 16'hFFFF;
+ wire [21:0] pq_reduced = {pause_time,6'd0} - 1700;
- always @ (posedge tx_clk or posedge rst)
- if (rst)
- xoff_gen <=0;
- else if (xoff_gen_complete)
- xoff_gen <=0;
- else if (xoff_int | xoff_int_d1)
- xoff_gen <=1;
+ always @(posedge rx_clk)
+ if(rx_reset)
+ xoff <= 0;
+ else
+ xoff <= (pause_request_en & (countdown==0) & (rx_fifo_space < pause_low_thresh));
- always @ (posedge tx_clk or posedge rst)
- if (rst)
- xon_gen <=0;
- else if (xon_gen_complete)
- xon_gen <=0;
- else if (xon_int | xon_int_d1)
- xon_gen <=1;
-
- wire [15:0] pq_reduced = pause_quanta_set - 2;
+ always @(posedge rx_clk)
+ if(rx_reset)
+ xon <= 0;
+ else
+ xon <= ((countdown!=0) & (rx_fifo_space > pause_hi_thresh));
- always @(posedge tx_clk or posedge rst)
- if(rst)
+ always @(posedge rx_clk)
+ if(rx_reset)
countdown <= 0;
- else if(xoff_gen)
- countdown <= {pq_reduced,6'd0};
- else if(xon_gen)
+ else if(xoff)
+ countdown <= pq_reduced;
+ else if(xon)
countdown <= 0;
else if(countdown != 0)
countdown <= countdown - 1;
+
+ // Cross clock domains
+ oneshot_2clk send_xon (.clk_in(rx_clk), .in(xon), .clk_out(tx_clk), .out(xon_tx));
+ oneshot_2clk send_xoff (.clk_in(rx_clk), .in(xoff), .clk_out(tx_clk), .out(xoff_tx));
+
+ always @(posedge tx_clk)
+ if(xoff_tx)
+ pause_time_req <= pause_time;
+ else if(xon_tx)
+ pause_time_req <= 0;
+
+ always @(posedge tx_clk)
+ if(tx_reset)
+ pause_req <= 0;
+ else
+ pause_req <= xon_tx | xoff_tx;
-endmodule // flow_ctrl
+endmodule // flow_ctrl_rx
|