diff options
Diffstat (limited to 'opencores/uart16550/rtl/verilog/uart_defines.v')
| -rw-r--r-- | opencores/uart16550/rtl/verilog/uart_defines.v | 250 |
1 files changed, 0 insertions, 250 deletions
diff --git a/opencores/uart16550/rtl/verilog/uart_defines.v b/opencores/uart16550/rtl/verilog/uart_defines.v deleted file mode 100644 index 8b372cb5a..000000000 --- a/opencores/uart16550/rtl/verilog/uart_defines.v +++ /dev/null @@ -1,250 +0,0 @@ -////////////////////////////////////////////////////////////////////// -//// //// -//// uart_defines.v //// -//// //// -//// //// -//// This file is part of the "UART 16550 compatible" project //// -//// http://www.opencores.org/cores/uart16550/ //// -//// //// -//// Documentation related to this project: //// -//// - http://www.opencores.org/cores/uart16550/ //// -//// //// -//// Projects compatibility: //// -//// - WISHBONE //// -//// RS232 Protocol //// -//// 16550D uart (mostly supported) //// -//// //// -//// Overview (main Features): //// -//// Defines of the Core //// -//// //// -//// Known problems (limits): //// -//// None //// -//// //// -//// To Do: //// -//// Nothing. //// -//// //// -//// Author(s): //// -//// - gorban@opencores.org //// -//// - Jacob Gorban //// -//// - Igor Mohor (igorm@opencores.org) //// -//// //// -//// Created: 2001/05/12 //// -//// Last Updated: 2001/05/17 //// -//// (See log for the revision history) //// -//// //// -//// //// -////////////////////////////////////////////////////////////////////// -//// //// -//// Copyright (C) 2000, 2001 Authors //// -//// //// -//// This source file may be used and distributed without //// -//// restriction provided that this copyright statement is not //// -//// removed from the file and that any derivative work contains //// -//// the original copyright notice and the associated disclaimer. //// -//// //// -//// This source file is free software; you can redistribute it //// -//// and/or modify it under the terms of the GNU Lesser General //// -//// Public License as published by the Free Software Foundation; //// -//// either version 2.1 of the License, or (at your option) any //// -//// later version. //// -//// //// -//// This source is distributed in the hope that it will be //// -//// useful, but WITHOUT ANY WARRANTY; without even the implied //// -//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// -//// PURPOSE. See the GNU Lesser General Public License for more //// -//// details. //// -//// //// -//// You should have received a copy of the GNU Lesser General //// -//// Public License along with this source; if not, download it //// -//// from http://www.opencores.org/lgpl.shtml //// -//// //// -////////////////////////////////////////////////////////////////////// -// -// CVS Revision History -// -// $Log: uart_defines.v,v $ -// Revision 1.14 2003/09/12 07:26:58 dries -// adjusted comment + define -// -// Revision 1.13 2003/06/11 16:37:47 gorban -// This fixes errors in some cases when data is being read and put to the FIFO at the same time. Patch is submitted by Scott Furman. Update is very recommended. -// -// Revision 1.12 2002/07/22 23:02:23 gorban -// Bug Fixes: -// * Possible loss of sync and bad reception of stop bit on slow baud rates fixed. -// Problem reported by Kenny.Tung. -// * Bad (or lack of ) loopback handling fixed. Reported by Cherry Withers. -// -// Improvements: -// * Made FIFO's as general inferrable memory where possible. -// So on FPGA they should be inferred as RAM (Distributed RAM on Xilinx). -// This saves about 1/3 of the Slice count and reduces P&R and synthesis times. -// -// * Added optional baudrate output (baud_o). -// This is identical to BAUDOUT* signal on 16550 chip. -// It outputs 16xbit_clock_rate - the divided clock. -// It's disabled by default. Define UART_HAS_BAUDRATE_OUTPUT to use. -// -// Revision 1.10 2001/12/11 08:55:40 mohor -// Scratch register define added. -// -// Revision 1.9 2001/12/03 21:44:29 gorban -// Updated specification documentation. -// Added full 32-bit data bus interface, now as default. -// Address is 5-bit wide in 32-bit data bus mode. -// Added wb_sel_i input to the core. It's used in the 32-bit mode. -// Added debug interface with two 32-bit read-only registers in 32-bit mode. -// Bits 5 and 6 of LSR are now only cleared on TX FIFO write. -// My small test bench is modified to work with 32-bit mode. -// -// Revision 1.8 2001/11/26 21:38:54 gorban -// Lots of fixes: -// Break condition wasn't handled correctly at all. -// LSR bits could lose their values. -// LSR value after reset was wrong. -// Timing of THRE interrupt signal corrected. -// LSR bit 0 timing corrected. -// -// Revision 1.7 2001/08/24 21:01:12 mohor -// Things connected to parity changed. -// Clock devider changed. -// -// Revision 1.6 2001/08/23 16:05:05 mohor -// Stop bit bug fixed. -// Parity bug fixed. -// WISHBONE read cycle bug fixed, -// OE indicator (Overrun Error) bug fixed. -// PE indicator (Parity Error) bug fixed. -// Register read bug fixed. -// -// Revision 1.5 2001/05/31 20:08:01 gorban -// FIFO changes and other corrections. -// -// Revision 1.4 2001/05/21 19:12:02 gorban -// Corrected some Linter messages. -// -// Revision 1.3 2001/05/17 18:34:18 gorban -// First 'stable' release. Should be sythesizable now. Also added new header. -// -// Revision 1.0 2001-05-17 21:27:11+02 jacob -// Initial revision -// -// - -// remove comments to restore to use the new version with 8 data bit interface -// in 32bit-bus mode, the wb_sel_i signal is used to put data in correct place -// also, in 8-bit version there'll be no debugging features included -// CAUTION: doesn't work with current version of OR1200 -//`define DATA_BUS_WIDTH_8 - -`ifdef DATA_BUS_WIDTH_8 - `define UART_ADDR_WIDTH 3 - `define UART_DATA_WIDTH 8 -`else - `define UART_ADDR_WIDTH 5 - `define UART_DATA_WIDTH 32 -`endif - -// Uncomment this if you want your UART to have -// 16xBaudrate output port. -// If defined, the enable signal will be used to drive baudrate_o signal -// It's frequency is 16xbaudrate - -`define UART_HAS_BAUDRATE_OUTPUT - -// Register addresses -`define UART_REG_RB `UART_ADDR_WIDTH'd0 // receiver buffer -`define UART_REG_TR `UART_ADDR_WIDTH'd0 // transmitter -`define UART_REG_IE `UART_ADDR_WIDTH'd1 // Interrupt enable -`define UART_REG_II `UART_ADDR_WIDTH'd2 // Interrupt identification -`define UART_REG_FC `UART_ADDR_WIDTH'd2 // FIFO control -`define UART_REG_LC `UART_ADDR_WIDTH'd3 // Line Control -`define UART_REG_MC `UART_ADDR_WIDTH'd4 // Modem control -`define UART_REG_LS `UART_ADDR_WIDTH'd5 // Line status -`define UART_REG_MS `UART_ADDR_WIDTH'd6 // Modem status -`define UART_REG_SR `UART_ADDR_WIDTH'd7 // Scratch register -`define UART_REG_DL1 `UART_ADDR_WIDTH'd0 // Divisor latch bytes (1-2) -`define UART_REG_DL2 `UART_ADDR_WIDTH'd1 - -// Interrupt Enable register bits -`define UART_IE_RDA 0 // Received Data available interrupt -`define UART_IE_THRE 1 // Transmitter Holding Register empty interrupt -`define UART_IE_RLS 2 // Receiver Line Status Interrupt -`define UART_IE_MS 3 // Modem Status Interrupt - -// Interrupt Identification register bits -`define UART_II_IP 0 // Interrupt pending when 0 -`define UART_II_II 3:1 // Interrupt identification - -// Interrupt identification values for bits 3:1 -`define UART_II_RLS 3'b011 // Receiver Line Status -`define UART_II_RDA 3'b010 // Receiver Data available -`define UART_II_TI 3'b110 // Timeout Indication -`define UART_II_THRE 3'b001 // Transmitter Holding Register empty -`define UART_II_MS 3'b000 // Modem Status - -// FIFO Control Register bits -`define UART_FC_TL 1:0 // Trigger level - -// FIFO trigger level values -`define UART_FC_1 2'b00 -`define UART_FC_4 2'b01 -`define UART_FC_8 2'b10 -`define UART_FC_14 2'b11 - -// Line Control register bits -`define UART_LC_BITS 1:0 // bits in character -`define UART_LC_SB 2 // stop bits -`define UART_LC_PE 3 // parity enable -`define UART_LC_EP 4 // even parity -`define UART_LC_SP 5 // stick parity -`define UART_LC_BC 6 // Break control -`define UART_LC_DL 7 // Divisor Latch access bit - -// Modem Control register bits -`define UART_MC_DTR 0 -`define UART_MC_RTS 1 -`define UART_MC_OUT1 2 -`define UART_MC_OUT2 3 -`define UART_MC_LB 4 // Loopback mode - -// Line Status Register bits -`define UART_LS_DR 0 // Data ready -`define UART_LS_OE 1 // Overrun Error -`define UART_LS_PE 2 // Parity Error -`define UART_LS_FE 3 // Framing Error -`define UART_LS_BI 4 // Break interrupt -`define UART_LS_TFE 5 // Transmit FIFO is empty -`define UART_LS_TE 6 // Transmitter Empty indicator -`define UART_LS_EI 7 // Error indicator - -// Modem Status Register bits -`define UART_MS_DCTS 0 // Delta signals -`define UART_MS_DDSR 1 -`define UART_MS_TERI 2 -`define UART_MS_DDCD 3 -`define UART_MS_CCTS 4 // Complement signals -`define UART_MS_CDSR 5 -`define UART_MS_CRI 6 -`define UART_MS_CDCD 7 - -// FIFO parameter defines - -`define UART_FIFO_WIDTH 8 -`define UART_FIFO_DEPTH 16 -`define UART_FIFO_POINTER_W 4 -`define UART_FIFO_COUNTER_W 5 -// receiver fifo has width 11 because it has break, parity and framing error bits -`define UART_FIFO_REC_WIDTH 11 - - -`define VERBOSE_WB 0 // All activity on the WISHBONE is recorded -`define VERBOSE_LINE_STATUS 0 // Details about the lsr (line status register) -`define FAST_TEST 1 // 64/1024 packets are sent - - - - - - - |