1 files changed, 110 insertions, 0 deletions
diff --git a/mpm/lib/mykonos/config/ad937x_config_t.cpp b/mpm/lib/mykonos/config/ad937x_config_t.cpp
new file mode 100644
index 000000000..5cfe6351e
--- /dev/null
+++ b/mpm/lib/mykonos/config/ad937x_config_t.cpp
@@ -0,0 +1,110 @@
+#include "ad937x_config_t.h"
+#include "mykonos_default_config.h"
+
+ad937x_config_t::ad937x_config_t()
+{
+    _assign_default_configuration();
+    _init_pointers();
+}
+
+void ad937x_config_t::_assign_default_configuration()
+{
+    // This is a pretty poor way of doing this, but the ADI structs force you
+    // to write spaghetti code sometimes.  This sets none of the required pointers,
+    // relying on a call to _init_pointers() to set all of them after the fact.
+    // TODO: do this better
+    _rx = DEFAULT_RX_SETTINGS;
+
+    _rxProfile = DEFAULT_RX_PROFILE;
+    _framer = DEFAULT_FRAMER;
+    _rxGainCtrl = DEFAULT_RX_GAIN;
+    _rxPeakAgc = DEFAULT_RX_PEAK_AGC;
+    _rxPowerAgc = DEFAULT_RX_POWER_AGC;
+    _rxAgcCtrl = DEFAULT_RX_AGC_CTRL;
+
+    _tx = DEFAULT_TX_SETTINGS;
+
+    _txProfile = DEFAULT_TX_PROFILE;
+    _deframer = DEFAULT_DEFRAMER;
+
+    // TODO: Likely an ADI bug.
+    // The TX bring up, for no reason, requires a valid ORX profile
+    // https://github.com/EttusResearch/uhddev/blob/eb2bcf9001b8e39eca8e62f0d6d5283895fae50d/embedded/libraries/mykonos/adi/mykonos.c#L16236
+
+    _obsRx = DEFAULT_ORX_SETTINGS;
+    _orxFramer = DEFAULT_ORX_FRAMER;
+    _orxProfile = DEFAULT_ORX_PROFILE;
+    _orxGainCtrl = DEFAULT_ORX_GAIN;
+    _orxPeakAgc = DEFAULT_ORX_PEAK_AGC;
+    _orxPowerAgc = DEFAULT_ORX_POWER_AGC;
+    _orxAgcCtrl = DEFAULT_ORX_AGC_CTRL;
+
+    _armGpio = DEFAULT_ARM_GPIO;
+    _gpio3v3 = DEFAULT_GPIO_3V3;
+    _gpio = DEFAULT_GPIO;
+    _auxIo = DEFAULT_AUX_IO;
+
+    _clocks = DEFAULT_CLOCKS;
+
+    _assign_firs();
+}
+
+void ad937x_config_t::_init_pointers()
+{
+    _device.spiSettings = &_spiSettings;
+    _device.rx = &_rx;
+    _device.tx = &_tx;
+    _device.obsRx = &_obsRx;
+    _device.auxIo = &_auxIo;
+    _device.clocks = &_clocks;
+
+    _rx.rxProfile = &_rxProfile;
+    _rxProfile.rxFir = _rx_fir_config.getFir();
+    _rx.framer = &_framer;
+    _rx.rxGainCtrl = &_rxGainCtrl;
+    _rx.rxAgcCtrl = &_rxAgcCtrl;
+    _rxAgcCtrl.peakAgc = &_rxPeakAgc;
+    _rxAgcCtrl.powerAgc = &_rxPowerAgc;
+
+    _tx.txProfile = &_txProfile;
+    _txProfile.txFir = _tx_fir_config.getFir();
+    _tx.deframer = &_deframer;
+
+    // AD9373
+    //_tx.dpdConfig = &_dpdConfig;
+    //_tx.clgcConfig = &_clgcConfig;
+    //_tx.vswrConfig = &_vswrConfig;
+
+    _obsRx.orxProfile = &_orxProfile;
+    _orxProfile.rxFir = _orx_fir_config.getFir();
+    _obsRx.orxGainCtrl = &_orxGainCtrl;
+    _obsRx.orxAgcCtrl = &_orxAgcCtrl;
+    _orxAgcCtrl.peakAgc = &_orxPeakAgc;
+    _orxAgcCtrl.powerAgc = &_orxPowerAgc;
+
+    _obsRx.snifferProfile = &_snifferProfile;
+    _snifferProfile.rxFir = _sniffer_rx_fir_config.getFir();
+    _obsRx.snifferGainCtrl = &_snifferGainCtrl;
+    // sniffer has no AGC ctrl, so leave as null
+    _obsRx.framer = &_orxFramer;
+
+    _auxIo.gpio3v3 = &_gpio3v3;
+    _auxIo.gpio = &_gpio;
+    _auxIo.armGpio = &_armGpio;
+}
+
+void ad937x_config_t::_assign_firs()
+{
+    // TODO: In general, storing just these pointers could lead to Bad Stuff
+    // Consider if it would be helpful to enforce some pointer safety here
+    // (if that's even possible with the C API)
+    _rx_fir_config = { -6,{ 48, 0 } };
+    _rxProfile.rxFir = _rx_fir_config.getFir();
+    _tx_fir_config = { 6,{ 32, 0 } };
+    _txProfile.txFir = _tx_fir_config.getFir();
+    _orx_fir_config = { -6, { 48, 0 } };
+    _orxProfile.rxFir = _orx_fir_config.getFir();
+    _sniffer_rx_fir_config = { -6, { 48, 0 } };
+    _snifferProfile.rxFir = _sniffer_rx_fir_config.getFir();
+}
+