diff options
Diffstat (limited to 'host')
| -rw-r--r-- | host/docs/rd_testing.dox | 19 |
1 files changed, 11 insertions, 8 deletions
diff --git a/host/docs/rd_testing.dox b/host/docs/rd_testing.dox index 0785bf6db..1817cf9f2 100644 --- a/host/docs/rd_testing.dox +++ b/host/docs/rd_testing.dox @@ -39,20 +39,20 @@ following). \subsection rdtesting_gpsdo_manual GPSDO: Manual Test Procedure 1. Without connecting the peripheral to the device, run `uhd_usrp_probe` on the - device and verify that the lack of GPSDO is correctly reported. No warning - or error must be printed. + device and verify that the lack of GPSDO is correctly reported under "sensors". + No warning or error must be printed. 2. This and the following tests are run with the peripheral connected: Run - `uhd_usrp_probe` and verify that the GPSDO is correctly reported. Power down - the device before connecting the peripheral. The GPSDO must be reported - found, and no error or warning must be printed. + `uhd_usrp_probe` and verify that the GPSDO is correctly reported under "sensors". + Power down the device before connecting the peripheral. The GPSDO must be + reported found, and no error or warning must be printed. 3. OCXO only: Without connecting the GPS antenna input, run - `query_gpsdo_sensors`. To pass, it must report the GPSDO as found, lock to + `utils/query_gpsdo_sensors`. To pass, it must report the GPSDO as found, lock to the external reference, but then report not being locked to GPS. The tool will report a valid GPS time, and a string such as "GPS and UHD Device time are aligned" in case of success. 4. Connect a GPS antenna to the input and make sure it is in a position to - receive GPS satellite data. Confirm that GPS lock is reported using - `query_gpsdo_sensors` within 20 minutes of connecting the antenna. + receive GPS satellite data. Confirm that GPS lock is reported by running + `utils/query_gpsdo_sensors` within 20 minutes of connecting the antenna. The tool `query_gpsdo_sensors` will print a string such as "GPS Locked" in case of success. @@ -93,6 +93,9 @@ Devtests are only defined for some devices. When running a devtest, all peripherals must be disconnected (e.g., no daughterboards on the X-Series, no GPSDOs on the B- and X-Series). +Running these tests requires the yaml package. Install this by executing the +command: `sudo apt-get install python-yaml` + \subsection rdtesting_devtest_manual Devtest: Manual Test Procedure ### X3x0 procedure |