diff options
Diffstat (limited to 'host')
-rw-r--r-- | host/lib/usrp/dboard/db_sbx_common.cpp | 88 | ||||
-rw-r--r-- | host/lib/usrp/dboard/db_sbx_common.hpp | 8 |
2 files changed, 39 insertions, 57 deletions
diff --git a/host/lib/usrp/dboard/db_sbx_common.cpp b/host/lib/usrp/dboard/db_sbx_common.cpp index d9a922896..d1cd5b373 100644 --- a/host/lib/usrp/dboard/db_sbx_common.cpp +++ b/host/lib/usrp/dboard/db_sbx_common.cpp @@ -219,34 +219,42 @@ void sbx_xcvr::update_atr(void){ int tx_ant_led = _tx_ant == "TX/RX" ? 0 : TX_LED_TXRX; //setup the tx atr (this does not change with antenna) - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_IDLE, - tx_pga0_iobits | tx_lo_lpf_en | tx_ld_led | tx_ant_led | TX_POWER_UP | ANT_XX | TX_MIXER_DIS); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \ + dboard_iface::ATR_REG_IDLE, 0 | tx_lo_lpf_en \ + | tx_ld_led | tx_ant_led | TX_POWER_UP | ANT_XX | TX_MIXER_DIS); //setup the rx atr (this does not change with antenna) - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, - rx_pga0_iobits | rx_lo_lpf_en | rx_ld_led | rx_ant_led | RX_POWER_UP | ANT_XX | RX_MIXER_DIS); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \ + dboard_iface::ATR_REG_IDLE, rx_pga0_iobits | rx_lo_lpf_en \ + | rx_ld_led | rx_ant_led | RX_POWER_UP | ANT_XX | RX_MIXER_DIS); //set the RX atr regs that change with antenna setting - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, - rx_pga0_iobits | rx_lo_lpf_en | rx_ld_led | rx_ant_led | RX_POWER_UP | RX_MIXER_ENB | - ((_rx_ant != "RX2")? ANT_TXRX : ANT_RX2)); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, - rx_pga0_iobits | rx_lo_lpf_en | rx_ld_led | rx_ant_led | RX_POWER_UP | RX_MIXER_DIS | - ((_rx_ant == "CAL")? ANT_TXRX : ANT_RX2)); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, - rx_pga0_iobits | rx_lo_lpf_en | rx_ld_led | rx_ant_led | RX_POWER_UP | RX_MIXER_ENB | - ((_rx_ant == "CAL")? ANT_TXRX : ANT_RX2)); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \ + dboard_iface::ATR_REG_RX_ONLY, rx_pga0_iobits | rx_lo_lpf_en \ + | rx_ld_led | rx_ant_led | RX_POWER_UP | RX_MIXER_ENB \ + | ((_rx_ant != "RX2")? ANT_TXRX : ANT_RX2)); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \ + dboard_iface::ATR_REG_TX_ONLY, rx_pga0_iobits | rx_lo_lpf_en \ + | rx_ld_led | rx_ant_led | RX_POWER_UP | RX_MIXER_DIS \ + | ((_rx_ant == "CAL")? ANT_TXRX : ANT_RX2)); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \ + dboard_iface::ATR_REG_FULL_DUPLEX, rx_pga0_iobits | rx_lo_lpf_en \ + | rx_ld_led | rx_ant_led | RX_POWER_UP | RX_MIXER_ENB \ + | ((_rx_ant == "CAL")? ANT_TXRX : ANT_RX2)); //set the TX atr regs that change with antenna setting - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_RX_ONLY, - tx_pga0_iobits | tx_lo_lpf_en | tx_ld_led | tx_ant_led | TX_POWER_UP | TX_MIXER_DIS | - ((_rx_ant != "RX2")? ANT_RX : ANT_TX)); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY, - tx_pga0_iobits | tx_lo_lpf_en | tx_ld_led | tx_ant_led | TX_POWER_UP | TX_MIXER_ENB | - ((_tx_ant == "CAL")? ANT_RX : ANT_TX)); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, - tx_pga0_iobits | tx_lo_lpf_en | tx_ld_led | tx_ant_led | TX_POWER_UP | TX_MIXER_ENB | - ((_tx_ant == "CAL")? ANT_RX : ANT_TX)); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \ + dboard_iface::ATR_REG_RX_ONLY, 0 | tx_lo_lpf_en \ + | tx_ld_led | tx_ant_led | TX_POWER_UP | TX_MIXER_DIS \ + | ((_rx_ant != "RX2")? ANT_RX : ANT_TX)); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \ + dboard_iface::ATR_REG_TX_ONLY, tx_pga0_iobits | tx_lo_lpf_en \ + | tx_ld_led | tx_ant_led | TX_POWER_UP | TX_MIXER_ENB \ + | ((_tx_ant == "CAL")? ANT_RX : ANT_TX)); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \ + dboard_iface::ATR_REG_FULL_DUPLEX, tx_pga0_iobits | tx_lo_lpf_en \ + | tx_ld_led | tx_ant_led | TX_POWER_UP | TX_MIXER_ENB \ + | ((_tx_ant == "CAL")? ANT_RX : ANT_TX)); } void sbx_xcvr::set_rx_ant(const std::string &ant){ @@ -281,6 +289,7 @@ double sbx_xcvr::set_lo_freq(dboard_iface::unit_t unit, double target_freq) { return actual; } + sensor_value_t sbx_xcvr::get_locked(dboard_iface::unit_t unit) { const bool locked = (this->get_iface()->read_gpio(unit) & LOCKDET_MASK) != 0; return sensor_value_t("LO", locked, "locked", "unlocked"); @@ -294,31 +303,18 @@ void sbx_xcvr::flash_leds(void) { this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_TX, (TXIO_MASK|RX_LED_IO)); this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, (RXIO_MASK|RX_LED_IO)); - /* - //flash All LEDs - for (int i = 0; i < 3; i++) { - this->get_iface()->set_gpio_out(dboard_iface::UNIT_RX, RX_LED_IO, RX_LED_IO); - this->get_iface()->set_gpio_out(dboard_iface::UNIT_TX, TX_LED_IO, TX_LED_IO); - - boost::this_thread::sleep(boost::posix_time::milliseconds(100)); - - this->get_iface()->set_gpio_out(dboard_iface::UNIT_RX, 0, RX_LED_IO); - this->get_iface()->set_gpio_out(dboard_iface::UNIT_TX, 0, TX_LED_IO); - - boost::this_thread::sleep(boost::posix_time::milliseconds(100)); - } - */ - this->get_iface()->set_gpio_out(dboard_iface::UNIT_TX, TX_LED_LD, TX_LED_IO); boost::this_thread::sleep(boost::posix_time::milliseconds(100)); - this->get_iface()->set_gpio_out(dboard_iface::UNIT_TX, TX_LED_TXRX|TX_LED_LD, TX_LED_IO); + this->get_iface()->set_gpio_out(dboard_iface::UNIT_TX, \ + TX_LED_TXRX|TX_LED_LD, TX_LED_IO); boost::this_thread::sleep(boost::posix_time::milliseconds(100)); this->get_iface()->set_gpio_out(dboard_iface::UNIT_RX, RX_LED_LD, RX_LED_IO); boost::this_thread::sleep(boost::posix_time::milliseconds(100)); - this->get_iface()->set_gpio_out(dboard_iface::UNIT_RX, RX_LED_RX1RX2|RX_LED_LD, RX_LED_IO); + this->get_iface()->set_gpio_out(dboard_iface::UNIT_RX, \ + RX_LED_RX1RX2|RX_LED_LD, RX_LED_IO); boost::this_thread::sleep(boost::posix_time::milliseconds(100)); this->get_iface()->set_gpio_out(dboard_iface::UNIT_RX, RX_LED_LD, RX_LED_IO); @@ -333,20 +329,6 @@ void sbx_xcvr::flash_leds(void) { this->get_iface()->set_gpio_out(dboard_iface::UNIT_TX, 0, TX_LED_IO); boost::this_thread::sleep(boost::posix_time::milliseconds(100)); - /* - //flash All LEDs - for (int i = 0; i < 3; i++) { - this->get_iface()->set_gpio_out(dboard_iface::UNIT_RX, 0, RX_LED_IO); - this->get_iface()->set_gpio_out(dboard_iface::UNIT_TX, 0, TX_LED_IO); - - boost::this_thread::sleep(boost::posix_time::milliseconds(100)); - - this->get_iface()->set_gpio_out(dboard_iface::UNIT_RX, RX_LED_IO, RX_LED_IO); - this->get_iface()->set_gpio_out(dboard_iface::UNIT_TX, TX_LED_IO, TX_LED_IO); - - boost::this_thread::sleep(boost::posix_time::milliseconds(100)); - } - */ //Put LED gpios back in ATR control and update atr this->get_iface()->set_pin_ctrl(dboard_iface::UNIT_TX, (TXIO_MASK|TX_LED_IO)); this->get_iface()->set_pin_ctrl(dboard_iface::UNIT_RX, (RXIO_MASK|RX_LED_IO)); diff --git a/host/lib/usrp/dboard/db_sbx_common.hpp b/host/lib/usrp/dboard/db_sbx_common.hpp index 2f3939f2b..6380ddb47 100644 --- a/host/lib/usrp/dboard/db_sbx_common.hpp +++ b/host/lib/usrp/dboard/db_sbx_common.hpp @@ -25,7 +25,7 @@ #define LOCKDET_MASK (1 << 0) // INPUT!!! // TX IO Pins -#define TRSW (1 << 14) // 0 = TX, 1 = RX +#define TRSW (1 << 14) // 0 = TX, 1 = RX #define TX_LED_TXRX (1 << 7) // LED for TX Antenna Selection TX/RX #define TX_LED_LD (1 << 6) // LED for TX Lock Detect #define DIS_POWER_TX (1 << 5) // on UNIT_TX, 0 powers up TX @@ -43,15 +43,15 @@ #define RX_ATTN_MASK (63 << RX_ATTN_SHIFT) // valid bits of RX Attenuator Control // TX Attenuator Pins -#define TX_ATTN_SHIFT 8 // lsb of RX Attenuator Control -#define TX_ATTN_MASK (63 << TX_ATTN_SHIFT) // valid bits of RX Attenuator Control +#define TX_ATTN_SHIFT 8 // lsb of TX Attenuator Control +#define TX_ATTN_MASK (63 << TX_ATTN_SHIFT) // valid bits of TX Attenuator Control // Mixer functions #define TX_MIXER_ENB (SYNTH_PDBRF|TX_ENABLE) #define TX_MIXER_DIS 0 #define RX_MIXER_ENB (SYNTH_PDBRF) -#define RX_MIXER_DIS 0 +#define RX_MIXER_DIS RX_DISABLE // Pin functions #define TX_LED_IO (TX_LED_TXRX|TX_LED_LD) // LED gpio lines, pull down for LED |