aboutsummaryrefslogtreecommitdiffstats
path: root/host/lib
diff options
context:
space:
mode:
Diffstat (limited to 'host/lib')
-rw-r--r--host/lib/transport/libusb1_base.cpp1
-rw-r--r--host/lib/usrp/b200/b200_impl.cpp36
-rw-r--r--host/lib/usrp/b200/b200_impl.hpp12
3 files changed, 33 insertions, 16 deletions
diff --git a/host/lib/transport/libusb1_base.cpp b/host/lib/transport/libusb1_base.cpp
index b1045ffa5..0baf8dc76 100644
--- a/host/lib/transport/libusb1_base.cpp
+++ b/host/lib/transport/libusb1_base.cpp
@@ -327,6 +327,7 @@ public:
bool firmware_loaded() {
return (get_manufacturer() == "Ettus Research LLC") or
+ (get_manufacturer() == "National Instruments Corp.") or
(get_manufacturer() == "Free Software Folks");
}
diff --git a/host/lib/usrp/b200/b200_impl.cpp b/host/lib/usrp/b200/b200_impl.cpp
index 14c2c31aa..7a91e3c2a 100644
--- a/host/lib/usrp/b200/b200_impl.cpp
+++ b/host/lib/usrp/b200/b200_impl.cpp
@@ -43,10 +43,6 @@ using namespace uhd::transport;
static const boost::posix_time::milliseconds REENUMERATION_TIMEOUT_MS(3000);
-//! mapping of frontend to radio perif index
-static const size_t FE1 = 1;
-static const size_t FE2 = 0;
-
class b200_ad9361_client_t : public ad9361_params {
public:
~b200_ad9361_client_t() {}
@@ -310,6 +306,18 @@ b200_impl::b200_impl(const device_addr_t &device_addr) :
_b200_type = B200;
}
+ //set up frontend mapping
+ _fe1 = 1;
+ _fe2 = 0;
+ if (_b200_type == B200 and
+ not mb_eeprom["revision"].empty() and
+ boost::lexical_cast<size_t>(mb_eeprom["revision"]) >= 5)
+ {
+ _fe1 = 0; //map radio0 to FE1
+ _fe2 = 1; //map radio1 to FE2
+ _gpio_state.atr_sel = 1; //map radio0 ATR pins to FE2
+ }
+
////////////////////////////////////////////////////////////////////
// Load the FPGA image, then reset GPIF
////////////////////////////////////////////////////////////////////
@@ -365,7 +373,6 @@ b200_impl::b200_impl(const device_addr_t &device_addr) :
/* Initialize the GPIOs, set the default bandsels to the lower range. Note
* that calling update_bandsel calls update_gpio_state(). */
- _gpio_state = gpio_state();
update_bandsel("RX", 800e6);
update_bandsel("TX", 850e6);
@@ -696,7 +703,7 @@ void b200_impl::setup_radio(const size_t dspno)
for(size_t direction = 0; direction < 2; direction++)
{
const std::string x = direction? "rx" : "tx";
- const std::string key = std::string((direction? "RX" : "TX")) + std::string(((dspno == FE1)? "1" : "2"));
+ const std::string key = std::string((direction? "RX" : "TX")) + std::string(((dspno == _fe1)? "1" : "2"));
const fs_path rf_fe_path = mb_path / "dboards" / "A" / (x+"_frontends") / (dspno? "B" : "A");
_tree->create<std::string>(rf_fe_path / "name").set("FE-"+key);
@@ -1025,6 +1032,7 @@ void b200_impl::update_bandsel(const std::string& which, double freq)
void b200_impl::update_gpio_state(void)
{
const boost::uint32_t misc_word = 0
+ | (_gpio_state.atr_sel << 8)
| (_gpio_state.tx_bandsel_a << 7)
| (_gpio_state.tx_bandsel_b << 6)
| (_gpio_state.rx_bandsel_a << 5)
@@ -1049,9 +1057,9 @@ void b200_impl::reset_codec_dcm(void)
void b200_impl::update_atrs(void)
{
- if (_radio_perifs.size() > FE1 and _radio_perifs[FE1].atr)
+ if (_radio_perifs.size() > _fe1 and _radio_perifs[_fe1].atr)
{
- radio_perifs_t &perif = _radio_perifs[FE1];
+ radio_perifs_t &perif = _radio_perifs[_fe1];
const bool enb_rx = bool(perif.rx_streamer.lock());
const bool enb_tx = bool(perif.tx_streamer.lock());
const bool is_rx2 = perif.ant_rx2;
@@ -1067,9 +1075,9 @@ void b200_impl::update_atrs(void)
atr->set_atr_reg(dboard_iface::ATR_REG_TX_ONLY, txonly);
atr->set_atr_reg(dboard_iface::ATR_REG_FULL_DUPLEX, fd);
}
- if (_radio_perifs.size() > FE2 and _radio_perifs[FE2].atr)
+ if (_radio_perifs.size() > _fe2 and _radio_perifs[_fe2].atr)
{
- radio_perifs_t &perif = _radio_perifs[FE2];
+ radio_perifs_t &perif = _radio_perifs[_fe2];
const bool enb_rx = bool(perif.rx_streamer.lock());
const bool enb_tx = bool(perif.tx_streamer.lock());
const bool is_rx2 = perif.ant_rx2;
@@ -1097,10 +1105,10 @@ void b200_impl::update_antenna_sel(const size_t which, const std::string &ant)
void b200_impl::update_enables(void)
{
//extract settings from state variables
- const bool enb_tx1 = (_radio_perifs.size() > FE1) and bool(_radio_perifs[FE1].tx_streamer.lock());
- const bool enb_rx1 = (_radio_perifs.size() > FE1) and bool(_radio_perifs[FE1].rx_streamer.lock());
- const bool enb_tx2 = (_radio_perifs.size() > FE2) and bool(_radio_perifs[FE2].tx_streamer.lock());
- const bool enb_rx2 = (_radio_perifs.size() > FE2) and bool(_radio_perifs[FE2].rx_streamer.lock());
+ const bool enb_tx1 = (_radio_perifs.size() > _fe1) and bool(_radio_perifs[_fe1].tx_streamer.lock());
+ const bool enb_rx1 = (_radio_perifs.size() > _fe1) and bool(_radio_perifs[_fe1].rx_streamer.lock());
+ const bool enb_tx2 = (_radio_perifs.size() > _fe2) and bool(_radio_perifs[_fe2].tx_streamer.lock());
+ const bool enb_rx2 = (_radio_perifs.size() > _fe2) and bool(_radio_perifs[_fe2].rx_streamer.lock());
const size_t num_rx = (enb_rx1?1:0) + (enb_rx2?1:0);
const size_t num_tx = (enb_tx1?1:0) + (enb_tx2?1:0);
const bool mimo = num_rx == 2 or num_tx == 2;
diff --git a/host/lib/usrp/b200/b200_impl.hpp b/host/lib/usrp/b200/b200_impl.hpp
index 0e5e09d4b..97dc21fc5 100644
--- a/host/lib/usrp/b200/b200_impl.hpp
+++ b/host/lib/usrp/b200/b200_impl.hpp
@@ -47,7 +47,7 @@
#include "recv_packet_demuxer_3000.hpp"
static const boost::uint8_t B200_FW_COMPAT_NUM_MAJOR = 7;
static const boost::uint8_t B200_FW_COMPAT_NUM_MINOR = 0;
-static const boost::uint16_t B200_FPGA_COMPAT_NUM = 5;
+static const boost::uint16_t B200_FPGA_COMPAT_NUM = 6;
static const double B200_BUS_CLOCK_RATE = 100e6;
static const double B200_DEFAULT_TICK_RATE = 32e6;
static const double B200_DEFAULT_FREQ = 100e6; // Hz
@@ -170,6 +170,13 @@ private:
};
std::vector<radio_perifs_t> _radio_perifs;
+ //mapping of AD936x frontends (FE1 and FE2) to radio perif index (0 and 1)
+ //FE1 corresponds to the ports labeled "RF B" on the B200/B210
+ //FE2 corresponds to the ports labeled "RF A" on the B200/B210
+ //the mapping is product and revision specific
+ size_t _fe1;
+ size_t _fe2;
+
/*! \brief Setup the DSP chain for one radio front-end.
*
*/
@@ -177,7 +184,7 @@ private:
void handle_overflow(const size_t radio_index);
struct gpio_state {
- boost::uint32_t tx_bandsel_a, tx_bandsel_b, rx_bandsel_a, rx_bandsel_b, rx_bandsel_c, codec_arst, mimo, ref_sel;
+ boost::uint32_t tx_bandsel_a, tx_bandsel_b, rx_bandsel_a, rx_bandsel_b, rx_bandsel_c, codec_arst, mimo, ref_sel, atr_sel;
gpio_state() {
tx_bandsel_a = 0;
@@ -188,6 +195,7 @@ private:
codec_arst = 0;
mimo = 0;
ref_sel = 0;
+ atr_sel = 0;
}
} _gpio_state;
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 10:13:17 +0000