aboutsummaryrefslogtreecommitdiffstats
path: root/host/lib/usrp/usrp2
diff options
context:
space:
mode:
Diffstat (limited to 'host/lib/usrp/usrp2')
-rw-r--r--host/lib/usrp/usrp2/fw_common.h4
-rw-r--r--host/lib/usrp/usrp2/io_impl.cpp144
-rw-r--r--host/lib/usrp/usrp2/mboard_impl.cpp39
-rw-r--r--host/lib/usrp/usrp2/usrp2_iface.cpp14
-rw-r--r--host/lib/usrp/usrp2/usrp2_impl.cpp13
-rw-r--r--host/lib/usrp/usrp2/usrp2_impl.hpp13
-rw-r--r--host/lib/usrp/usrp2/usrp2_regs.cpp2
-rw-r--r--host/lib/usrp/usrp2/usrp2_regs.hpp18
8 files changed, 182 insertions, 65 deletions
diff --git a/host/lib/usrp/usrp2/fw_common.h b/host/lib/usrp/usrp2/fw_common.h
index 6c9596092..a9c39e650 100644
--- a/host/lib/usrp/usrp2/fw_common.h
+++ b/host/lib/usrp/usrp2/fw_common.h
@@ -33,8 +33,8 @@ extern "C" {
#endif
//fpga and firmware compatibility numbers
-#define USRP2_FPGA_COMPAT_NUM 2
-#define USRP2_FW_COMPAT_NUM 6
+#define USRP2_FPGA_COMPAT_NUM 3
+#define USRP2_FW_COMPAT_NUM 7
//used to differentiate control packets over data port
#define USRP2_INVALID_VRT_HEADER 0
diff --git a/host/lib/usrp/usrp2/io_impl.cpp b/host/lib/usrp/usrp2/io_impl.cpp
index 4b498ff7f..f2101519d 100644
--- a/host/lib/usrp/usrp2/io_impl.cpp
+++ b/host/lib/usrp/usrp2/io_impl.cpp
@@ -18,11 +18,11 @@
#include "../../transport/vrt_packet_handler.hpp"
#include "usrp2_impl.hpp"
#include "usrp2_regs.hpp"
+#include <uhd/utils/byteswap.hpp>
#include <uhd/utils/thread_priority.hpp>
#include <uhd/transport/convert_types.hpp>
#include <uhd/transport/alignment_buffer.hpp>
#include <boost/format.hpp>
-#include <boost/asio.hpp> //htonl and ntohl
#include <boost/bind.hpp>
#include <boost/thread.hpp>
#include <iostream>
@@ -32,7 +32,73 @@ using namespace uhd::usrp;
using namespace uhd::transport;
namespace asio = boost::asio;
-static const int underflow_flags = async_metadata_t::EVENT_CODE_UNDERFLOW | async_metadata_t::EVENT_CODE_UNDERFLOW_IN_PACKET;
+/***********************************************************************
+ * constants
+ **********************************************************************/
+static const int underflow_flags = 0
+ | async_metadata_t::EVENT_CODE_UNDERFLOW
+ | async_metadata_t::EVENT_CODE_UNDERFLOW_IN_PACKET
+;
+
+static const size_t vrt_send_header_offset_words32 = 1;
+
+/***********************************************************************
+ * flow control monitor for a single tx channel
+ * - the pirate thread calls update
+ * - the get send buffer calls check
+ **********************************************************************/
+class flow_control_monitor{
+public:
+ typedef boost::uint32_t seq_type;
+ typedef boost::shared_ptr<flow_control_monitor> sptr;
+
+ /*!
+ * Make a new flow control monitor.
+ * \param max_seqs_out num seqs before throttling
+ */
+ flow_control_monitor(seq_type max_seqs_out){
+ _last_seq_out = 0;
+ _last_seq_ack = 0;
+ _max_seqs_out = max_seqs_out;
+ }
+
+ /*!
+ * Check the flow control condition.
+ * \param seq the sequence to go out
+ * \param timeout the timeout in seconds
+ * \return false on timeout
+ */
+ UHD_INLINE bool check_fc_condition(seq_type seq, double timeout){
+ boost::this_thread::disable_interruption di; //disable because the wait can throw
+ boost::unique_lock<boost::mutex> lock(_fc_mutex);
+ _last_seq_out = seq;
+ return _fc_cond.timed_wait(
+ lock,
+ boost::posix_time::microseconds(long(timeout*1e6)),
+ boost::bind(&flow_control_monitor::ready, this)
+ );
+ }
+
+ /*!
+ * Update the flow control condition.
+ * \param seq the last sequence number to be ACK'd
+ */
+ UHD_INLINE void update_fc_condition(seq_type seq){
+ boost::unique_lock<boost::mutex> lock(_fc_mutex);
+ _last_seq_ack = seq;
+ lock.unlock();
+ _fc_cond.notify_one();
+ }
+
+private:
+ bool ready(void){
+ return seq_type(_last_seq_out -_last_seq_ack) < _max_seqs_out;
+ }
+
+ boost::mutex _fc_mutex;
+ boost::condition _fc_cond;
+ seq_type _last_seq_out, _last_seq_ack, _max_seqs_out;
+};
/***********************************************************************
* io impl details (internal to this file)
@@ -44,12 +110,14 @@ static const int underflow_flags = async_metadata_t::EVENT_CODE_UNDERFLOW | asyn
struct usrp2_impl::io_impl{
typedef alignment_buffer<managed_recv_buffer::sptr, time_spec_t> alignment_buffer_type;
- io_impl(size_t num_frames, size_t width):
+ io_impl(size_t num_recv_frames, size_t send_frame_size, size_t width):
packet_handler_recv_state(width),
- recv_pirate_booty(alignment_buffer_type::make(num_frames-3, width)),
+ recv_pirate_booty(alignment_buffer_type::make(num_recv_frames-3, width)),
async_msg_fifo(bounded_buffer<async_metadata_t>::make(100/*messages deep*/))
{
- /* NOP */
+ for (size_t i = 0; i < width; i++) fc_mons.push_back(
+ flow_control_monitor::sptr(new flow_control_monitor(usrp2_impl::sram_bytes/send_frame_size))
+ );
}
~io_impl(void){
@@ -63,6 +131,29 @@ struct usrp2_impl::io_impl{
return recv_pirate_booty->pop_elems_with_timed_wait(buffs, timeout);
}
+ bool get_send_buffs(
+ const std::vector<zero_copy_if::sptr> &trans,
+ vrt_packet_handler::managed_send_buffs_t &buffs,
+ double timeout
+ ){
+ UHD_ASSERT_THROW(trans.size() == buffs.size());
+
+ //calculate the flow control word
+ const boost::uint32_t fc_word32 = packet_handler_send_state.next_packet_seq;
+
+ //grab a managed buffer for each index
+ for (size_t i = 0; i < buffs.size(); i++){
+ if (not fc_mons[i]->check_fc_condition(fc_word32, timeout)) return false;
+ buffs[i] = trans[i]->get_send_buff(timeout);
+ if (not buffs[i].get()) return false;
+ buffs[i]->cast<boost::uint32_t *>()[0] = uhd::htonx(fc_word32);
+ }
+ return true;
+ }
+
+ //flow control monitors
+ std::vector<flow_control_monitor::sptr> fc_mons;
+
//state management for the vrt packet handler code
vrt_packet_handler::recv_state packet_handler_recv_state;
vrt_packet_handler::send_state packet_handler_send_state;
@@ -115,8 +206,16 @@ void usrp2_impl::io_impl::recv_pirate_loop(
);
metadata.event_code = vrt_packet_handler::get_context_code<async_metadata_t::event_code_t>(vrt_hdr, if_packet_info);
+ //catch the flow control packets and react
+ if (metadata.event_code == 0){
+ boost::uint32_t fc_word32 = (vrt_hdr + if_packet_info.num_header_words32)[1];
+ this->fc_mons[index]->update_fc_condition(uhd::ntohx(fc_word32));
+ continue;
+ }
+
//print the famous U, and push the metadata into the message queue
if (metadata.event_code & underflow_flags) std::cerr << "U" << std::flush;
+ //else std::cout << "metadata.event_code " << metadata.event_code << std::endl;
async_msg_fifo->push_with_pop_on_full(metadata);
continue;
}
@@ -146,22 +245,13 @@ void usrp2_impl::io_impl::recv_pirate_loop(
* Helper Functions
**********************************************************************/
void usrp2_impl::io_init(void){
- //send a small data packet so the usrp2 knows the udp source port
- BOOST_FOREACH(zero_copy_if::sptr data_transport, _data_transports){
- managed_send_buffer::sptr send_buff = data_transport->get_send_buff();
- static const boost::uint32_t data = htonl(USRP2_INVALID_VRT_HEADER);
- std::memcpy(send_buff->cast<void*>(), &data, sizeof(data));
- send_buff->commit(sizeof(data));
- //drain the recv buffers (may have junk)
- while (data_transport->get_recv_buff().get()){};
- }
- //the number of recv frames is the number for the first transport
//the assumption is that all data transports should be identical
- size_t num_frames = _data_transports.front()->get_num_recv_frames();
+ const size_t num_recv_frames = _data_transports.front()->get_num_recv_frames();
+ const size_t send_frame_size = _data_transports.front()->get_send_frame_size();
//create new io impl
- _io_impl = UHD_PIMPL_MAKE(io_impl, (num_frames, _data_transports.size()));
+ _io_impl = UHD_PIMPL_MAKE(io_impl, (num_recv_frames, send_frame_size, _data_transports.size()));
//create a new pirate thread for each zc if (yarr!!)
for (size_t i = 0; i < _data_transports.size(); i++){
@@ -193,23 +283,10 @@ bool usrp2_impl::recv_async_msg(
/***********************************************************************
* Send Data
**********************************************************************/
-static bool get_send_buffs(
- const std::vector<udp_zero_copy::sptr> &trans,
- vrt_packet_handler::managed_send_buffs_t &buffs,
- double timeout
-){
- UHD_ASSERT_THROW(trans.size() == buffs.size());
- bool good = true;
- for (size_t i = 0; i < buffs.size(); i++){
- buffs[i] = trans[i]->get_send_buff(timeout);
- good = good and (buffs[i].get() != NULL);
- }
- return good;
-}
-
size_t usrp2_impl::get_max_send_samps_per_packet(void) const{
static const size_t hdr_size = 0
+ vrt::max_if_hdr_words32*sizeof(boost::uint32_t)
+ + vrt_send_header_offset_words32*sizeof(boost::uint32_t)
- sizeof(vrt::if_packet_info_t().cid) //no class id ever used
;
const size_t bpp = _data_transports.front()->get_send_frame_size() - hdr_size;
@@ -228,8 +305,9 @@ size_t usrp2_impl::send(
io_type, _tx_otw_type, //input and output types to convert
_mboards.front()->get_master_clock_freq(), //master clock tick rate
uhd::transport::vrt::if_hdr_pack_be,
- boost::bind(&get_send_buffs, _data_transports, _1, timeout),
- get_max_send_samps_per_packet()
+ boost::bind(&usrp2_impl::io_impl::get_send_buffs, _io_impl.get(), _data_transports, _1, timeout),
+ get_max_send_samps_per_packet(),
+ vrt_send_header_offset_words32
);
}
diff --git a/host/lib/usrp/usrp2/mboard_impl.cpp b/host/lib/usrp/usrp2/mboard_impl.cpp
index 3df89d327..92b1d0be9 100644
--- a/host/lib/usrp/usrp2/mboard_impl.cpp
+++ b/host/lib/usrp/usrp2/mboard_impl.cpp
@@ -21,6 +21,7 @@
#include <uhd/usrp/dsp_utils.hpp>
#include <uhd/usrp/mboard_props.hpp>
#include <uhd/utils/assert.hpp>
+#include <uhd/utils/byteswap.hpp>
#include <uhd/utils/algorithm.hpp>
#include <boost/bind.hpp>
#include <iostream>
@@ -36,12 +37,24 @@ using namespace boost::posix_time;
usrp2_mboard_impl::usrp2_mboard_impl(
size_t index,
transport::udp_simple::sptr ctrl_transport,
- size_t recv_frame_size
+ transport::zero_copy_if::sptr data_transport,
+ size_t recv_samps_per_packet,
+ const device_addr_t &flow_control_hints
):
_index(index),
- _recv_frame_size(recv_frame_size),
_iface(usrp2_iface::make(ctrl_transport))
{
+ //Send a small data packet so the usrp2 knows the udp source port.
+ //This setup must happen before further initialization occurs
+ //or the async update packets will cause ICMP destination unreachable.
+ transport::managed_send_buffer::sptr send_buff = data_transport->get_send_buff();
+ static const boost::uint32_t data[2] = {
+ uhd::htonx(boost::uint32_t(0 /* don't care seq num */)),
+ uhd::htonx(boost::uint32_t(USRP2_INVALID_VRT_HEADER))
+ };
+ std::memcpy(send_buff->cast<void*>(), &data, sizeof(data));
+ send_buff->commit(sizeof(data));
+
//contruct the interfaces to mboard perifs
_clock_ctrl = usrp2_clock_ctrl::make(_iface);
_codec_ctrl = usrp2_codec_ctrl::make(_iface);
@@ -64,13 +77,14 @@ usrp2_mboard_impl::usrp2_mboard_impl(
_allowed_decim_and_interp_rates.push_back(i);
}
+
//Issue a stop streaming command (in case it was left running).
//Since this command is issued before the networking is setup,
//most if not all junk packets will never make it to the socket.
this->issue_ddc_stream_cmd(stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS);
//setup the vrt rx registers
- _iface->poke32(_iface->regs.rx_ctrl_nsamps_per_pkt, _recv_frame_size);
+ _iface->poke32(_iface->regs.rx_ctrl_nsamps_per_pkt, recv_samps_per_packet);
_iface->poke32(_iface->regs.rx_ctrl_nchannels, 1);
_iface->poke32(_iface->regs.rx_ctrl_clear_overrun, 1); //reset
_iface->poke32(_iface->regs.rx_ctrl_vrt_header, 0
@@ -89,6 +103,17 @@ usrp2_mboard_impl::usrp2_mboard_impl(
_iface->poke32(_iface->regs.tx_ctrl_report_sid, 1); //sid 1 (different from rx)
_iface->poke32(_iface->regs.tx_ctrl_policy, U2_FLAG_TX_CTRL_POLICY_NEXT_PACKET);
+ //setting the cycles per update
+ const double ups_per_sec = flow_control_hints.cast<double>("ups_per_sec", 100);
+ const size_t cycles_per_up = size_t(_clock_ctrl->get_master_clock_rate()/ups_per_sec);
+ _iface->poke32(_iface->regs.tx_ctrl_cycles_per_up, U2_FLAG_TX_CTRL_UP_ENB | cycles_per_up);
+ _iface->poke32(_iface->regs.tx_ctrl_cycles_per_up, 0); //cycles per update is disabled
+
+ //setting the packets per update
+ const double ups_per_fifo = flow_control_hints.cast<double>("ups_per_fifo", 8);
+ const size_t packets_per_up = size_t(usrp2_impl::sram_bytes/ups_per_fifo/data_transport->get_send_frame_size());
+ _iface->poke32(_iface->regs.tx_ctrl_packets_per_up, U2_FLAG_TX_CTRL_UP_ENB | packets_per_up);
+
//init the ddc
init_ddc_config();
@@ -110,7 +135,8 @@ usrp2_mboard_impl::usrp2_mboard_impl(
}
usrp2_mboard_impl::~usrp2_mboard_impl(void){
- /* NOP */
+ _iface->poke32(_iface->regs.tx_ctrl_cycles_per_up, 0);
+ _iface->poke32(_iface->regs.tx_ctrl_packets_per_up, 0);
}
/***********************************************************************
@@ -187,7 +213,6 @@ void usrp2_mboard_impl::set_time_spec(const time_spec_t &time_spec, bool now){
}
void usrp2_mboard_impl::handle_overflow(void){
- _iface->poke32(_iface->regs.rx_ctrl_clear_overrun, 1);
if (_continuous_streaming){ //re-issue the stream command if already continuous
this->issue_ddc_stream_cmd(stream_cmd_t::STREAM_MODE_START_CONTINUOUS);
}
@@ -195,9 +220,7 @@ void usrp2_mboard_impl::handle_overflow(void){
void usrp2_mboard_impl::issue_ddc_stream_cmd(const stream_cmd_t &stream_cmd){
_continuous_streaming = stream_cmd.stream_mode == stream_cmd_t::STREAM_MODE_START_CONTINUOUS;
- _iface->poke32(_iface->regs.rx_ctrl_stream_cmd, dsp_type1::calc_stream_cmd_word(
- stream_cmd, _recv_frame_size
- ));
+ _iface->poke32(_iface->regs.rx_ctrl_stream_cmd, dsp_type1::calc_stream_cmd_word(stream_cmd));
_iface->poke32(_iface->regs.rx_ctrl_time_secs, boost::uint32_t(stream_cmd.time_spec.get_full_secs()));
_iface->poke32(_iface->regs.rx_ctrl_time_ticks, stream_cmd.time_spec.get_tick_count(get_master_clock_freq()));
}
diff --git a/host/lib/usrp/usrp2/usrp2_iface.cpp b/host/lib/usrp/usrp2/usrp2_iface.cpp
index 2b32faffb..81bc80c88 100644
--- a/host/lib/usrp/usrp2/usrp2_iface.cpp
+++ b/host/lib/usrp/usrp2/usrp2_iface.cpp
@@ -33,18 +33,6 @@ using namespace uhd;
using namespace uhd::usrp;
using namespace uhd::transport;
-/*!
- * FIXME: large timeout, ethernet pause frames...
- *
- * Use a large timeout to work-around the fact that
- * flow-control may throttle outgoing control packets
- * due to its use of ethernet pause frames.
- *
- * This will be fixed when host-based flow control is implemented,
- * along with larger incoming send buffers using the on-board SRAM.
- */
-static const double CONTROL_TIMEOUT = 3.0; //seconds
-
class usrp2_iface_impl : public usrp2_iface{
public:
/***********************************************************************
@@ -256,7 +244,7 @@ public:
boost::uint8_t usrp2_ctrl_data_in_mem[udp_simple::mtu]; //allocate max bytes for recv
const usrp2_ctrl_data_t *ctrl_data_in = reinterpret_cast<const usrp2_ctrl_data_t *>(usrp2_ctrl_data_in_mem);
while(true){
- size_t len = _ctrl_transport->recv(boost::asio::buffer(usrp2_ctrl_data_in_mem), CONTROL_TIMEOUT);
+ size_t len = _ctrl_transport->recv(boost::asio::buffer(usrp2_ctrl_data_in_mem));
if(len >= sizeof(boost::uint32_t) and ntohl(ctrl_data_in->proto_ver) != USRP2_FW_COMPAT_NUM){
throw std::runtime_error(str(boost::format(
"Expected protocol compatibility number %d, but got %d:\n"
diff --git a/host/lib/usrp/usrp2/usrp2_impl.cpp b/host/lib/usrp/usrp2/usrp2_impl.cpp
index 42fe9c018..610e2f404 100644
--- a/host/lib/usrp/usrp2/usrp2_impl.cpp
+++ b/host/lib/usrp/usrp2/usrp2_impl.cpp
@@ -17,7 +17,7 @@
#include "usrp2_impl.hpp"
#include <uhd/transport/if_addrs.hpp>
-#include <uhd/transport/udp_simple.hpp>
+#include <uhd/transport/udp_zero_copy.hpp>
#include <uhd/usrp/device_props.hpp>
#include <uhd/utils/assert.hpp>
#include <uhd/utils/static.hpp>
@@ -144,7 +144,7 @@ static device::sptr usrp2_make(const device_addr_t &device_addr){
//create a ctrl and data transport for each address
std::vector<udp_simple::sptr> ctrl_transports;
- std::vector<udp_zero_copy::sptr> data_transports;
+ std::vector<zero_copy_if::sptr> data_transports;
BOOST_FOREACH(const std::string &addr, std::split_string(device_addr["addr"])){
ctrl_transports.push_back(udp_simple::make_connected(
@@ -157,7 +157,7 @@ static device::sptr usrp2_make(const device_addr_t &device_addr){
//create the usrp2 implementation guts
return device::sptr(
- new usrp2_impl(ctrl_transports, data_transports)
+ new usrp2_impl(ctrl_transports, data_transports, device_addr)
);
}
@@ -170,7 +170,8 @@ UHD_STATIC_BLOCK(register_usrp2_device){
**********************************************************************/
usrp2_impl::usrp2_impl(
std::vector<udp_simple::sptr> ctrl_transports,
- std::vector<udp_zero_copy::sptr> data_transports
+ std::vector<zero_copy_if::sptr> data_transports,
+ const device_addr_t &flow_control_hints
):
_data_transports(data_transports)
{
@@ -189,7 +190,9 @@ usrp2_impl::usrp2_impl(
//create a new mboard handler for each control transport
for(size_t i = 0; i < ctrl_transports.size(); i++){
_mboards.push_back(usrp2_mboard_impl::sptr(new usrp2_mboard_impl(
- i, ctrl_transports[i], this->get_max_recv_samps_per_packet()
+ i, ctrl_transports[i], data_transports[i],
+ this->get_max_recv_samps_per_packet(),
+ flow_control_hints
)));
//use an empty name when there is only one mboard
std::string name = (ctrl_transports.size() > 1)? boost::lexical_cast<std::string>(i) : "";
diff --git a/host/lib/usrp/usrp2/usrp2_impl.hpp b/host/lib/usrp/usrp2/usrp2_impl.hpp
index 738c398d9..ede777323 100644
--- a/host/lib/usrp/usrp2/usrp2_impl.hpp
+++ b/host/lib/usrp/usrp2/usrp2_impl.hpp
@@ -85,7 +85,9 @@ public:
usrp2_mboard_impl(
size_t index,
uhd::transport::udp_simple::sptr,
- size_t recv_frame_size
+ uhd::transport::zero_copy_if::sptr,
+ size_t recv_samps_per_packet,
+ const uhd::device_addr_t &flow_control_hints
);
~usrp2_mboard_impl(void);
@@ -97,7 +99,6 @@ public:
private:
size_t _index;
- const size_t _recv_frame_size;
bool _continuous_streaming;
//interfaces
@@ -178,14 +179,18 @@ private:
*/
class usrp2_impl : public uhd::device{
public:
+ static const size_t sram_bytes = size_t(1 << 20);
+
/*!
* Create a new usrp2 impl base.
* \param ctrl_transports the udp transports for control
* \param data_transports the udp transports for data
+ * \param flow_control_hints optional flow control params
*/
usrp2_impl(
std::vector<uhd::transport::udp_simple::sptr> ctrl_transports,
- std::vector<uhd::transport::udp_zero_copy::sptr> data_transports
+ std::vector<uhd::transport::zero_copy_if::sptr> data_transports,
+ const uhd::device_addr_t &flow_control_hints
);
~usrp2_impl(void);
@@ -215,7 +220,7 @@ private:
uhd::dict<std::string, usrp2_mboard_impl::sptr> _mboard_dict;
//io impl methods and members
- std::vector<uhd::transport::udp_zero_copy::sptr> _data_transports;
+ std::vector<uhd::transport::zero_copy_if::sptr> _data_transports;
uhd::otw_type_t _rx_otw_type, _tx_otw_type;
UHD_PIMPL_DECL(io_impl) _io_impl;
void io_init(void);
diff --git a/host/lib/usrp/usrp2/usrp2_regs.cpp b/host/lib/usrp/usrp2/usrp2_regs.cpp
index b24082edb..dd0433816 100644
--- a/host/lib/usrp/usrp2/usrp2_regs.cpp
+++ b/host/lib/usrp/usrp2/usrp2_regs.cpp
@@ -95,6 +95,8 @@ usrp2_regs_t usrp2_get_regs(bool use_n2xx_map) {
x.tx_ctrl_clear_state = sr_addr(misc_output_base, x.sr_tx_ctrl + 1);
x.tx_ctrl_report_sid = sr_addr(misc_output_base, x.sr_tx_ctrl + 2);
x.tx_ctrl_policy = sr_addr(misc_output_base, x.sr_tx_ctrl + 3);
+ x.tx_ctrl_cycles_per_up = sr_addr(misc_output_base, x.sr_tx_ctrl + 4);
+ x.tx_ctrl_packets_per_up = sr_addr(misc_output_base, x.sr_tx_ctrl + 5);
return x;
}
diff --git a/host/lib/usrp/usrp2/usrp2_regs.hpp b/host/lib/usrp/usrp2/usrp2_regs.hpp
index 1081ff159..9936d634a 100644
--- a/host/lib/usrp/usrp2/usrp2_regs.hpp
+++ b/host/lib/usrp/usrp2/usrp2_regs.hpp
@@ -97,6 +97,8 @@ typedef struct {
int tx_ctrl_clear_state;
int tx_ctrl_report_sid;
int tx_ctrl_policy;
+ int tx_ctrl_cycles_per_up;
+ int tx_ctrl_packets_per_up;
} usrp2_regs_t;
extern const usrp2_regs_t usrp2_regs; //the register definitions, set in usrp2_regs.cpp and usrp2p_regs.cpp
@@ -254,7 +256,18 @@ usrp2_regs_t usrp2_get_regs(bool);
///////////////////////////////////////////////////
// RX CTRL regs
///////////////////////////////////////////////////
+// The following 3 are logically a single command register.
+// They are clocked into the underlying fifo when time_ticks is written.
+//#define U2_REG_RX_CTRL_STREAM_CMD _SR_ADDR(SR_RX_CTRL + 0) // {now, chain, num_samples(30)
+//#define U2_REG_RX_CTRL_TIME_SECS _SR_ADDR(SR_RX_CTRL + 1)
+//#define U2_REG_RX_CTRL_TIME_TICKS _SR_ADDR(SR_RX_CTRL + 2)
+//#define U2_REG_RX_CTRL_CLEAR_STATE _SR_ADDR(SR_RX_CTRL + 3)
+//#define U2_REG_RX_CTRL_VRT_HEADER _SR_ADDR(SR_RX_CTRL + 4) // word 0 of packet. FPGA fills in packet counter
+//#define U2_REG_RX_CTRL_VRT_STREAM_ID _SR_ADDR(SR_RX_CTRL + 5) // word 1 of packet.
+//#define U2_REG_RX_CTRL_VRT_TRAILER _SR_ADDR(SR_RX_CTRL + 6)
+//#define U2_REG_RX_CTRL_NSAMPS_PER_PKT _SR_ADDR(SR_RX_CTRL + 7)
+//#define U2_REG_RX_CTRL_NCHANNELS _SR_ADDR(SR_RX_CTRL + 8) // 1 in basic case, up to 4 for vector sources
///////////////////////////////////////////////////
// TX CTRL regs
@@ -263,9 +276,14 @@ usrp2_regs_t usrp2_get_regs(bool);
//#define U2_REG_TX_CTRL_CLEAR_STATE _SR_ADDR(SR_TX_CTRL + 1)
//#define U2_REG_TX_CTRL_REPORT_SID _SR_ADDR(SR_TX_CTRL + 2)
//#define U2_REG_TX_CTRL_POLICY _SR_ADDR(SR_TX_CTRL + 3)
+//#define U2_REG_TX_CTRL_CYCLES_PER_UP _SR_ADDR(SR_TX_CTRL + 4)
+//#define U2_REG_TX_CTRL_PACKETS_PER_UP _SR_ADDR(SR_TX_CTRL + 5)
#define U2_FLAG_TX_CTRL_POLICY_WAIT (0x1 << 0)
#define U2_FLAG_TX_CTRL_POLICY_NEXT_PACKET (0x1 << 1)
#define U2_FLAG_TX_CTRL_POLICY_NEXT_BURST (0x1 << 2)
+//enable flag for registers: cycles and packets per update packet
+#define U2_FLAG_TX_CTRL_UP_ENB (1ul << 31)
+
#endif /* INCLUDED_USRP2_REGS_HPP */
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 12:28:06 +0000