diff options
Diffstat (limited to 'host/lib/usrp/usrp2/usrp2_regs.hpp')
| -rw-r--r-- | host/lib/usrp/usrp2/usrp2_regs.hpp | 39 |
1 files changed, 38 insertions, 1 deletions
diff --git a/host/lib/usrp/usrp2/usrp2_regs.hpp b/host/lib/usrp/usrp2/usrp2_regs.hpp index 0e2a18756..feeccaa34 100644 --- a/host/lib/usrp/usrp2/usrp2_regs.hpp +++ b/host/lib/usrp/usrp2/usrp2_regs.hpp @@ -64,7 +64,23 @@ ///////////////////////////////////////////////// // Misc Control //////////////////////////////////////////////// -#define FR_CLOCK_CONTROL _SR_ADDR(0) +#define FR_MISC_CTRL_CLOCK _SR_ADDR(0) +#define FR_MISC_CTRL_SERDES _SR_ADDR(1) +#define FR_MISC_CTRL_ADC _SR_ADDR(2) +#define FR_MISC_CTRL_LEDS _SR_ADDR(3) +#define FR_MISC_CTRL_PHY _SR_ADDR(4) // LSB is reset line to eth phy +#define FR_MISC_CTRL_DBG_MUX _SR_ADDR(5) +#define FR_MISC_CTRL_RAM_PAGE _SR_ADDR(6) // FIXME should go somewhere else... +#define FR_MISC_CTRL_FLUSH_ICACHE _SR_ADDR(7) // Flush the icache +#define FR_MISC_CTRL_LED_SRC _SR_ADDR(8) // HW or SW control for LEDs + +#define FRF_MISC_CTRL_SERDES_ENABLE 8 +#define FRF_MISC_CTRL_SERDES_PRBSEN 4 +#define FRF_MISC_CTRL_SERDES_LOOPEN 2 +#define FRF_MISC_CTRL_SERDES_RXEN 1 + +#define FRF_MISC_CTRL_ADC_ON 0x0F +#define FRF_MISC_CTRL_ADC_OFF 0x00 ///////////////////////////////////////////////// // VITA49 64 bit time (write only) @@ -207,4 +223,25 @@ #define FR_ATR_FULL_TXSIDE FR_ATR_BASE + 12 #define FR_ATR_FULL_RXSIDE FR_ATR_BASE + 14 +/////////////////////////////////////////////////// +// VITA RX CTRL regs +/////////////////////////////////////////////////// +// The following 3 are logically a single command register. +// They are clocked into the underlying fifo when time_ticks is written. +#define FR_RX_CTRL_STREAM_CMD _SR_ADDR(SR_RX_CTRL + 0) // {now, chain, num_samples(30) +#define FR_RX_CTRL_TIME_SECS _SR_ADDR(SR_RX_CTRL + 1) +#define FR_RX_CTRL_TIME_TICKS _SR_ADDR(SR_RX_CTRL + 2) + +#define FR_RX_CTRL_CLEAR_OVERRUN _SR_ADDR(SR_RX_CTRL + 3) // write anything to clear overrun +#define FR_RX_CTRL_VRT_HEADER _SR_ADDR(SR_RX_CTRL + 4) // word 0 of packet. FPGA fills in packet counter +#define FR_RX_CTRL_VRT_STREAM_ID _SR_ADDR(SR_RX_CTRL + 5) // word 1 of packet. +#define FR_RX_CTRL_VRT_TRAILER _SR_ADDR(SR_RX_CTRL + 6) +#define FR_RX_CTRL_NSAMPS_PER_PKT _SR_ADDR(SR_RX_CTRL + 7) +#define FR_RX_CTRL_NCHANNELS _SR_ADDR(SR_RX_CTRL + 8) // 1 in basic case, up to 4 for vector sources + +//helpful macros for dealing with stream cmd +#define FR_RX_CTRL_MAX_SAMPS_PER_CMD 0x1fffffff +#define FR_RX_CTRL_MAKE_CMD(nsamples, now, chain, reload) \ + ((((now) & 0x1) << 31) | (((chain) & 0x1) << 30) | (((reload) & 0x1) << 29) | ((nsamples) & 0x1fffffff)) + #endif /* INCLUDED_USRP2_REGS_HPP */ |