diff options
Diffstat (limited to 'host/lib/usrp/dboard/db_rfx.cpp')
| -rw-r--r-- | host/lib/usrp/dboard/db_rfx.cpp | 28 |
1 files changed, 14 insertions, 14 deletions
diff --git a/host/lib/usrp/dboard/db_rfx.cpp b/host/lib/usrp/dboard/db_rfx.cpp index 1cb39f83c..e5dc16808 100644 --- a/host/lib/usrp/dboard/db_rfx.cpp +++ b/host/lib/usrp/dboard/db_rfx.cpp @@ -112,19 +112,19 @@ rfx_xcvr::rfx_xcvr( _freq_range = freq_range; //enable the clocks that we need - this->get_interface()->set_clock_enabled(dboard_interface::UNIT_TX, true); - this->get_interface()->set_clock_enabled(dboard_interface::UNIT_RX, true); + this->get_iface()->set_clock_enabled(dboard_iface::UNIT_TX, true); + this->get_iface()->set_clock_enabled(dboard_iface::UNIT_RX, true); //set the gpio directions boost::uint16_t output_enables = POWER_UP | ANT_SW | MIX_EN; - this->get_interface()->set_gpio_ddr(dboard_interface::UNIT_TX, output_enables); - this->get_interface()->set_gpio_ddr(dboard_interface::UNIT_RX, output_enables); + this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_TX, output_enables); + this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, output_enables); //setup the tx atr (this does not change with antenna) - this->get_interface()->set_atr_reg(dboard_interface::UNIT_TX, dboard_interface::ATR_REG_IDLE, POWER_UP | ANT_SW); - this->get_interface()->set_atr_reg(dboard_interface::UNIT_TX, dboard_interface::ATR_REG_RX_ONLY, POWER_UP | ANT_SW); - this->get_interface()->set_atr_reg(dboard_interface::UNIT_TX, dboard_interface::ATR_REG_TX_ONLY, POWER_UP | MIX_EN); - this->get_interface()->set_atr_reg(dboard_interface::UNIT_TX, dboard_interface::ATR_REG_FULL_DUPLEX, POWER_UP | MIX_EN); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_IDLE, POWER_UP | ANT_SW); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_RX_ONLY, POWER_UP | ANT_SW); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY, POWER_UP | MIX_EN); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, POWER_UP | MIX_EN); //set some default values set_lo_freq((_freq_range.min + _freq_range.max)/2.0); @@ -148,10 +148,10 @@ void rfx_xcvr::set_rx_ant(const std::string &ant){ boost::uint16_t ant_val = (ant == "tx/rx")? 0 : ANT_SW; //set the rx atr regs - this->get_interface()->set_atr_reg(dboard_interface::UNIT_RX, dboard_interface::ATR_REG_IDLE, POWER_UP | ant_val); - this->get_interface()->set_atr_reg(dboard_interface::UNIT_RX, dboard_interface::ATR_REG_RX_ONLY, POWER_UP | ant_val | MIX_EN); - this->get_interface()->set_atr_reg(dboard_interface::UNIT_RX, dboard_interface::ATR_REG_TX_ONLY, POWER_UP | ant_val); - this->get_interface()->set_atr_reg(dboard_interface::UNIT_RX, dboard_interface::ATR_REG_FULL_DUPLEX, POWER_UP | ant_val | MIX_EN); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, POWER_UP | ant_val); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, POWER_UP | ant_val | MIX_EN); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, POWER_UP | ant_val); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, POWER_UP | ant_val | MIX_EN); } void rfx_xcvr::set_rx_pga0_gain(float gain){ @@ -165,8 +165,8 @@ void rfx_xcvr::reload_adf4360_regs(void){ (adf4360_regs_t::ADDR_RCOUNTER) ; BOOST_FOREACH(adf4360_regs_t::addr_t addr, addrs){ - this->get_interface()->write_spi( - dboard_interface::UNIT_TX, + this->get_iface()->write_spi( + dboard_iface::UNIT_TX, spi_config_t::EDGE_RISE, _adf4360_regs.get_reg(addr), 24 ); |