diff options
Diffstat (limited to 'host/lib/include/uhdlib/usrp')
| -rw-r--r-- | host/lib/include/uhdlib/usrp/cores/gpio_atr_3000.hpp | 71 |
1 files changed, 47 insertions, 24 deletions
diff --git a/host/lib/include/uhdlib/usrp/cores/gpio_atr_3000.hpp b/host/lib/include/uhdlib/usrp/cores/gpio_atr_3000.hpp index aa266cbcb..85f22d967 100644 --- a/host/lib/include/uhdlib/usrp/cores/gpio_atr_3000.hpp +++ b/host/lib/include/uhdlib/usrp/cores/gpio_atr_3000.hpp @@ -17,38 +17,66 @@ namespace uhd { namespace usrp { namespace gpio_atr { -class gpio_atr_3000 : uhd::noncopyable +struct gpio_atr_offsets { -public: - typedef std::shared_ptr<gpio_atr_3000> sptr; - - static const uint32_t MASK_SET_ALL = 0xFFFFFFFF; + uhd::wb_iface::wb_addr_type idle; + uhd::wb_iface::wb_addr_type rx; + uhd::wb_iface::wb_addr_type tx; + uhd::wb_iface::wb_addr_type duplex; + uhd::wb_iface::wb_addr_type ddr; + uhd::wb_iface::wb_addr_type disable; + uhd::wb_iface::wb_addr_type readback; - virtual ~gpio_atr_3000(void) {} + /*! + * Returns whether this GPIO regmap is write-only. + * + * \return whether the readback register is valid + */ + bool is_writeonly() const; /*! - * Create a read-write GPIO ATR interface object + * Create a GPIO regmap according to the typical "defaults": Four + * sequential ATR registers followed immediately by, in order, duplex, + * direction, disable, and an explicitly specified readback address. * - * \param iface register iface to GPIO ATR registers * \param base base settings offset for GPIO ATR registers * \param rb_addr readback offset for GPIO ATR registers - * \param reg_offset Delta between the register addresses + * \param stride Delta between the register addresses */ - static sptr make(uhd::wb_iface::sptr iface, + static gpio_atr_offsets make_default( const uhd::wb_iface::wb_addr_type base, const uhd::wb_iface::wb_addr_type rb_addr, - const size_t reg_offset = 4); + const size_t stride = 4); /*! - * Create a write-only GPIO ATR interface object + * Create a GPIO regmap according to the typical "defaults" (see + * make_default), with the readback register disabled. * - * \param iface register iface to GPIO ATR registers * \param base base settings offset for GPIO ATR registers - * \param reg_offset Delta between the register addresses + * \param rb_addr readback offset for GPIO ATR registers + * \param stride Delta between the register addresses */ - static sptr make_write_only(uhd::wb_iface::sptr iface, + static gpio_atr_offsets make_write_only( const uhd::wb_iface::wb_addr_type base, - const size_t reg_offset = 4); + const size_t stride = 4); +}; + +class gpio_atr_3000 : uhd::noncopyable +{ +public: + typedef std::shared_ptr<gpio_atr_3000> sptr; + + static const uint32_t MASK_SET_ALL = 0xFFFFFFFF; + + virtual ~gpio_atr_3000(void) {} + + /*! + * Create a GPIO ATR interface object using the given registers + * + * \param iface register iface to GPIO ATR registers + * \param registers Register offsets + */ + static sptr make(uhd::wb_iface::sptr iface, gpio_atr_offsets registers); /*! * Select the ATR mode for all bits in the mask @@ -124,17 +152,12 @@ public: virtual ~db_gpio_atr_3000(void) {} /*! - * Create a read-write GPIO ATR interface object for a daughterboard connector + * Create a GPIO ATR interface object for a daughterboard connector * * \param iface register iface to GPIO ATR registers - * \param base base settings offset for GPIO ATR registers - * \param rb_addr readback offset for GPIO ATR registers - * \param reg_offset Delta between the register addresses + * \param registers Register offsets */ - static sptr make(uhd::wb_iface::sptr iface, - const uhd::wb_iface::wb_addr_type base, - const uhd::wb_iface::wb_addr_type rb_addr, - const size_t reg_offset = 4); + static sptr make(uhd::wb_iface::sptr iface, gpio_atr_offsets registers); /*! * Configure the GPIO mode for all pins in the daughterboard connector |