diff options
Diffstat (limited to 'host/docs/usrp_x3x0.dox')
| -rw-r--r-- | host/docs/usrp_x3x0.dox | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/host/docs/usrp_x3x0.dox b/host/docs/usrp_x3x0.dox index 5f7284a09..8a3d52a7d 100644 --- a/host/docs/usrp_x3x0.dox +++ b/host/docs/usrp_x3x0.dox @@ -112,7 +112,7 @@ ready for development! - Prior to installing the module, the host PC can remain powered on. - Plug a 1 Gigabit SFP Transceiver into Ethernet Port 0 on the USRP X300/X310 device. -- Use the Ethernet cable to connect the SFP+ transciever on the device to the host computer. For maximum throughput, Ettus Research recommends that you connect each device to its own dedicated Gigabit Ethernet interface on the host computer. +- Use the Ethernet cable to connect the SFP+ transceiver on the device to the host computer. For maximum throughput, Ettus Research recommends that you connect each device to its own dedicated Gigabit Ethernet interface on the host computer. - Connect the AC/DC power supply to the device and plug the supply into a wall outlet. - The OS will automatically recognize the device (e.g. when running `uhd_find_devices`). @@ -157,7 +157,7 @@ We will use the 'MXI' nomenclature for the rest of this manual.</b> ### Installing the PCIe Kernel Drivers In order to use the USRP X-Series on a PCIe-over-MXI connection, you need to -install the NI RIO drivers on your system. Please follow the insructions here: +install the NI RIO drivers on your system. Please follow the instructions here: \ref page_ni_rio_kernel ### Installing the PCI Express Interface Kit @@ -198,7 +198,7 @@ We will use the 'MXI' nomenclature for the rest of this manual.</b> ### Installing the PCIe Kernel Drivers In order to use the USRP X-Series on a PCIe-over-MXI connection, you need to -install the NI RIO drivers on your system. Please follow the insructions here: +install the NI RIO drivers on your system. Please follow the instructions here: \ref page_ni_rio_kernel ### Installing the PCI Express Card @@ -443,7 +443,7 @@ for information specific to certain daughterboards. Not all combinations of daughterboards work within the same device, if daughterboard clock requirements conflict. Note that some daughterboards -(e.g. the UBX) will try and set the daughterboard clock rate themself. +(e.g. the UBX) will try and set the daughterboard clock rate themselves. \section x3x0_addressing Addressing the Device |