diff options
Diffstat (limited to 'host/docs/usrp2.dox')
| -rw-r--r-- | host/docs/usrp2.dox | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/host/docs/usrp2.dox b/host/docs/usrp2.dox index 3f85e45b5..7f8c94b8b 100644 --- a/host/docs/usrp2.dox +++ b/host/docs/usrp2.dox @@ -102,7 +102,7 @@ indirectly to a USRP2 through a Gigabit Ethernet switch. \subsection usrp2_network_setuphost Setup the host interface -The USRP2 communicates at the IP/UDP layer over the gigabit ethernet. +The USRP2 communicates at the IP/UDP layer over the gigabit Ethernet. The default IP address of the USRP2 is **192.168.10.2**. You will need to configure the host's Ethernet interface with a static IP address to enable communication. An address of **192.168.10.1** and a subnet mask @@ -189,7 +189,7 @@ IP address are in the previous section of this documentation. \subsection usrp2_commprob_firewall Firewall issues When the IP address is not specified, the device discovery broadcasts -UDP packets from each ethernet interface. Many firewalls will block the +UDP packets from each Ethernet interface. Many firewalls will block the replies to these broadcast packets. If disabling your system's firewall or specifying the IP address yields a discovered device, then your firewall may be blocking replies to UDP broadcast packets. If this is |