diff options
Diffstat (limited to 'fpga/usrp3')
| -rw-r--r-- | fpga/usrp3/lib/fifo/axi_fifo_short.v | 185 |
1 files changed, 87 insertions, 98 deletions
diff --git a/fpga/usrp3/lib/fifo/axi_fifo_short.v b/fpga/usrp3/lib/fifo/axi_fifo_short.v index 465be28bb..d78bee24e 100644 --- a/fpga/usrp3/lib/fifo/axi_fifo_short.v +++ b/fpga/usrp3/lib/fifo/axi_fifo_short.v @@ -1,113 +1,102 @@ // // Copyright 2012 Ettus Research LLC // Copyright 2018 Ettus Research, a National Instruments Company +// Copyright 2020 Ettus Research, a National Instruments Brand // // SPDX-License-Identifier: LGPL-3.0-or-later // - - -// -// 32 word FIFO with AXI4-STREAM interface. +// Description: 32 word FIFO with AXI4-Stream interface. // -// NOTE: This module uses the SRLC32E primitive explicitly and as such -// can only be used with Xilinx technology of the VIRTEX-6/SPARTAN-6/SIERIES-7 or newer. +// NOTE: This module uses the SRLC32E primitive explicitly and as such can +// only be used with Xilinx technology. // -module axi_fifo_short - #(parameter WIDTH=32) - ( - input clk, - input reset, - input clear, - input [WIDTH-1:0] i_tdata, - input i_tvalid, - output i_tready, - output [WIDTH-1:0] o_tdata, - output o_tvalid, - input o_tready, - - output reg [5:0] space, - output reg [5:0] occupied - ); +module axi_fifo_short #( + parameter WIDTH = 32 +) ( + input clk, + input reset, + input clear, + input [WIDTH-1:0] i_tdata, + input i_tvalid, + output i_tready, + output [WIDTH-1:0] o_tdata, + output o_tvalid, + input o_tready, - reg full = 1'b0, empty = 1'b1; - wire write = i_tvalid & i_tready; - wire read = o_tready & o_tvalid; + output reg [5:0] space, + output reg [5:0] occupied +); - assign i_tready = ~full; - assign o_tvalid = ~empty; - - reg [4:0] a; - genvar i; - - generate - for (i=0;i<WIDTH;i=i+1) - begin : gen_srlc32e - SRLC32E - srlc32e(.Q(o_tdata[i]), .Q31(), - .A(a), //.A0(a[0]),.A1(a[1]),.A2(a[2]),.A3(a[3]),.A4(a[4]), - .CE(write),.CLK(clk),.D(i_tdata[i])); - end - endgenerate - - always @(posedge clk) - if(reset) - begin - a <= 0; - empty <= 1; - full <= 0; - end - else if(clear) - begin - a <= 0; - empty <= 1; - full<= 0; - end - else if(read & ~write) - begin - full <= 0; - if(a==0) - empty <= 1; - else - a <= a - 1; - end - else if(write & ~read) - begin - empty <= 0; - if(~empty) - a <= a + 1; - if(a == 30) - full <= 1; - end + reg full = 1'b0, empty = 1'b1; + wire write = i_tvalid & i_tready; + wire read = o_tready & o_tvalid; - // NOTE will fail if you write into a full fifo or read from an empty one + assign i_tready = ~full; + assign o_tvalid = ~empty; + + reg [4:0] a; + genvar i; + + generate + for (i=0;i<WIDTH;i=i+1) begin : gen_srlc32e + SRLC32E srlc32e( + .Q(o_tdata[i]), .Q31(), + .A(a), + .CE(write),.CLK(clk),.D(i_tdata[i]) + ); + end + endgenerate + + always @(posedge clk) begin + if(reset) begin + a <= 0; + empty <= 1; + full <= 0; + end + else if(clear) begin + a <= 0; + empty <= 1; + full<= 0; + end + else if(read & ~write) begin + full <= 0; + if(a==0) + empty <= 1; + else + a <= a - 1; + end + else if(write & ~read) begin + empty <= 0; + if(~empty) + a <= a + 1; + if(a == 30) + full <= 1; + end + end - ////////////////////////////////////////////////////////////// - // space and occupied are used for diagnostics, not - // guaranteed correct - - //assign space = full ? 0 : empty ? 16 : 15-a; - //assign occupied = empty ? 0 : full ? 16 : a+1; + // NOTE: Will fail if you write into a full FIFO or read from an empty one - always @(posedge clk) - if(reset) - space <= 6'd32; - else if(clear) - space <= 6'd32; - else if(read & ~write) - space <= space + 6'd1; - else if(write & ~read) - space <= space - 6'd1; - - always @(posedge clk) - if(reset) - occupied <= 6'd0; - else if(clear) - occupied <= 6'd0; - else if(read & ~write) - occupied <= occupied - 6'd1; - else if(write & ~read) - occupied <= occupied + 6'd1; - + always @(posedge clk) begin + if(reset) + space <= 6'd32; + else if(clear) + space <= 6'd32; + else if(read & ~write) + space <= space + 6'd1; + else if(write & ~read) + space <= space - 6'd1; + end + + always @(posedge clk) begin + if(reset) + occupied <= 6'd0; + else if(clear) + occupied <= 6'd0; + else if(read & ~write) + occupied <= occupied - 6'd1; + else if(write & ~read) + occupied <= occupied + 6'd1; + end + endmodule // axi_fifo_short - |