1 files changed, 0 insertions, 91 deletions
diff --git a/fpga/usrp3/lib/zynq_fifo/zf_slave_readback.v b/fpga/usrp3/lib/zynq_fifo/zf_slave_readback.v
deleted file mode 100644
index f7e25deb2..000000000
--- a/fpga/usrp3/lib/zynq_fifo/zf_slave_readback.v
+++ /dev/null
@@ -1,91 +0,0 @@
-//////////////////////////////////////////////////////////////////////////////////
-// Copyright Ettus Research LLC
-// The ZYNQ FIFO slave readback:
-//  - implements read state machine for 32-bit addressable AXI slave
-//  - provides readback for state of per-stream fifo pointers
-//////////////////////////////////////////////////////////////////////////////////
-
-
-module zf_slave_readback
-#(
-    parameter CONFIG_BASE = 32'h40000000
-)
-(
-    input clk,
-    input rst,
-
-    //------------------------------------------------------------------
-    //-- control read signals - slave
-    //------------------------------------------------------------------
-    input [31:0] AXI_ARADDR,
-    input AXI_ARVALID,
-    output AXI_ARREADY,
-    output [31:0] AXI_RDATA,
-    output [1:0] AXI_RRESP,
-    output AXI_RVALID,
-    input AXI_RREADY,
-
-    //------------------------------------------------------------------
-    // readback interface
-    //------------------------------------------------------------------
-    output reg [31:0] addr,
-    input [31:0] data,
-    output strobe,
-
-    output [31:0] debug
-);
-
-////////////////////////////////////////////////////////////////////////
-///////////////////////////// Begin R T L //////////////////////////////
-////////////////////////////////////////////////////////////////////////
-
-    //------------------------------------------------------------------
-    // Control read state machine responds to AXI control reads
-    // Used for reading back the state of the various FIFOs
-    //------------------------------------------------------------------
-    localparam STATE_ADDR = 0;
-    localparam STATE_READ = 1;
-    localparam STATE_DATA = 2;
-
-    reg [3:0] state;
-
-    always @(posedge clk) begin
-        if (rst) begin
-            state <= STATE_ADDR;
-            addr <= 0;
-        end
-        else case (state)
-
-        STATE_ADDR: begin
-            if (AXI_ARVALID && AXI_ARREADY) begin
-                state <= STATE_READ;
-                addr <= (AXI_ARADDR - CONFIG_BASE);
-            end
-        end
-
-        STATE_READ: begin
-            state <= STATE_DATA;
-        end
-
-        STATE_DATA: begin
-            if (AXI_RVALID && AXI_RREADY) begin
-                state <= STATE_ADDR;
-            end
-        end
-
-        default: state <= STATE_ADDR;
-
-        endcase //state
-    end
-
-    assign strobe = AXI_RVALID && AXI_RREADY;
-
-    //readback data
-    assign AXI_RDATA = data;
-    //only acking address reads from the wait state
-    assign AXI_ARREADY = (state == STATE_ADDR);
-    //when to release outputs from the slave
-    assign AXI_RVALID = (state == STATE_DATA);
-    assign AXI_RRESP = 0;
-
-endmodule //zf_slave_readback