diff options
Diffstat (limited to 'fpga/usrp2/top/B100')
| -rw-r--r-- | fpga/usrp2/top/B100/B100.ucf | 16 | ||||
| -rw-r--r-- | fpga/usrp2/top/B100/B100.v | 16 | ||||
| -rw-r--r-- | fpga/usrp2/top/B100/Makefile.B100 | 16 | ||||
| -rwxr-xr-x | fpga/usrp2/top/B100/core_compile | 2 | ||||
| -rw-r--r-- | fpga/usrp2/top/B100/timing.ucf | 9 | ||||
| -rw-r--r-- | fpga/usrp2/top/B100/u1plus_core.v | 122 |
6 files changed, 113 insertions, 68 deletions
diff --git a/fpga/usrp2/top/B100/B100.ucf b/fpga/usrp2/top/B100/B100.ucf index 69fd49971..1c04c5d8d 100644 --- a/fpga/usrp2/top/B100/B100.ucf +++ b/fpga/usrp2/top/B100/B100.ucf @@ -25,6 +25,9 @@ NET "reset_n" LOC = "D5" ; NET "PPS_IN" LOC = "M14" ; NET "reset_codec" LOC = "B14" ; +## recycles fpga_cfg_cclk for reset from fw +NET "ext_reset" LOC = "R14" ; + ## GPIF NET "GPIF_D<15>" LOC = "P7" ; NET "GPIF_D<14>" LOC = "N8" ; @@ -43,17 +46,18 @@ NET "GPIF_D<2>" LOC = "N9" ; NET "GPIF_D<1>" LOC = "P9" ; NET "GPIF_D<0>" LOC = "P8" ; -NET "GPIF_CTL<3>" LOC = "N5" ; +##NET "GPIF_CTL<3>" LOC = "N5" ; +NET "GPIF_CTL<3>" LOC = "P12" ; NET "GPIF_CTL<2>" LOC = "M11" ; NET "GPIF_CTL<1>" LOC = "M9" ; NET "GPIF_CTL<0>" LOC = "M7" ; -NET "GPIF_RDY<3>" LOC = "N11" ; -NET "GPIF_RDY<2>" LOC = "T10" ; -NET "GPIF_RDY<1>" LOC = "T4" ; -NET "GPIF_RDY<0>" LOC = "R5" ; +##NET "GPIF_RDY<3>" LOC = "N11" ; +##NET "GPIF_RDY<2>" LOC = "T10" ; +NET "GPIF_SLWR" LOC = "T4" ; +NET "GPIF_SLRD" LOC = "R5" ; -NET "GPIF_CS" LOC = "P12" ; +##NET "GPIF_CS" LOC = "P12" ; NET "GPIF_SLOE" LOC = "R11" ; NET "GPIF_PKTEND" LOC = "P10" ; NET "GPIF_ADR<0>" LOC = "T11" ; diff --git a/fpga/usrp2/top/B100/B100.v b/fpga/usrp2/top/B100/B100.v index f2d75c54e..dcda974b4 100644 --- a/fpga/usrp2/top/B100/B100.v +++ b/fpga/usrp2/top/B100/B100.v @@ -23,8 +23,8 @@ module B100 output [2:0] debug_led, output [31:0] debug, output [1:0] debug_clk, // GPIF - inout [15:0] GPIF_D, input [3:0] GPIF_CTL, output [3:0] GPIF_RDY, - input [1:0] GPIF_ADR, output GPIF_CS, output GPIF_SLOE, output GPIF_PKTEND, + inout [15:0] GPIF_D, input [3:0] GPIF_CTL, output GPIF_SLOE, + output [1:0] GPIF_ADR, output GPIF_SLWR, output GPIF_SLRD, output GPIF_PKTEND, input IFCLK, inout SDA_FPGA, inout SCL_FPGA, // I2C @@ -41,7 +41,8 @@ module B100 input [11:0] adc, input RXSYNC, input PPS_IN, - input reset_n, output reset_codec + input reset_n, output reset_codec, + input ext_reset ); assign reset_codec = 1; // Believed to be active low @@ -55,7 +56,7 @@ module B100 BUFG clk_fpga_BUFG (.I(clk_fpga_in), .O(clk_fpga)); - reset_sync reset_sync(.clk(clk_fpga), .reset_in(~reset_n), .reset_out(reset)); + reset_sync reset_sync(.clk(clk_fpga), .reset_in((~reset_n) | (~ext_reset)), .reset_out(reset)); // ///////////////////////////////////////////////////////////////////////// // SPI @@ -156,9 +157,10 @@ module B100 u1plus_core u1p_c(.clk_fpga(clk_fpga), .rst_fpga(reset), .debug_led(debug_led), .debug(debug), .debug_clk(debug_clk), .debug_txd(), .debug_rxd(1'b1), - .gpif_d(GPIF_D), .gpif_ctl(GPIF_CTL), .gpif_rdy(GPIF_RDY), - .gpif_misc({GPIF_CS,GPIF_SLOE,GPIF_PKTEND}), - .gpif_clk(IFCLK), + + .gpif_d(GPIF_D), .gpif_ctl(GPIF_CTL), .gpif_pktend(GPIF_PKTEND), + .gpif_sloe(GPIF_SLOE), .gpif_slwr(GPIF_SLWR), .gpif_slrd(GPIF_SLRD), + .gpif_fifoadr(GPIF_ADR), .gpif_clk(IFCLK), .db_sda(SDA_FPGA), .db_scl(SCL_FPGA), .sclk(sclk), .sen({SEN_CODEC,SEN_TX_DB,SEN_RX_DB}), .mosi(mosi), .miso(miso), diff --git a/fpga/usrp2/top/B100/Makefile.B100 b/fpga/usrp2/top/B100/Makefile.B100 index 90dd25942..3cdbb62c0 100644 --- a/fpga/usrp2/top/B100/Makefile.B100 +++ b/fpga/usrp2/top/B100/Makefile.B100 @@ -1,5 +1,5 @@ # -# Copyright 2008 Ettus Research LLC +# Copyright 2008-2012 Ettus Research LLC # ################################################## @@ -7,7 +7,14 @@ ################################################## TOP_MODULE := B100 BUILD_DIR := build-B100/ -export PROJ_FILE := $(BUILD_DIR)$(TOP_MODULE).ise + +# set me in a custom makefile +CUSTOM_SRCS = +CUSTOM_DEFS = + +################################################## +# Include other makefiles +################################################## include ../Makefile.common include ../../fifo/Makefile.srcs @@ -50,7 +57,7 @@ SOURCES = $(abspath $(TOP_SRCS)) $(FIFO_SRCS) \ $(CONTROL_LIB_SRCS) $(SDR_LIB_SRCS) $(SERDES_SRCS) \ $(SIMPLE_GEMAC_SRCS) $(TIMING_SRCS) $(OPENCORES_SRCS) \ $(VRT_SRCS) $(UDP_SRCS) $(COREGEN_SRCS) $(EXTRAM_SRCS) \ -$(GPIF_SRCS) +$(GPIF_SRCS) $(CUSTOM_SRCS) ################################################## # Process Properties @@ -63,7 +70,8 @@ SYNTHESIZE_PROPERTIES = \ "Register Balancing" Yes \ "Use Clock Enable" Auto \ "Use Synchronous Reset" Auto \ -"Use Synchronous Set" Auto +"Use Synchronous Set" Auto \ +"Verilog Macros" "$(CUSTOM_MOD_DEFS)" TRANSLATE_PROPERTIES = \ "Macro Search Path" "$(shell pwd)/../../coregen/" diff --git a/fpga/usrp2/top/B100/core_compile b/fpga/usrp2/top/B100/core_compile index b2ccc8b49..b62cbaee0 100755 --- a/fpga/usrp2/top/B100/core_compile +++ b/fpga/usrp2/top/B100/core_compile @@ -1 +1 @@ -iverilog -Wall -y. -y ../../control_lib/ -y ../../fifo/ -y ../../gpif/ -y ../../models/ -y ../../sdr_lib/ -y ../../coregen/ -y ../../vrt/ -y ../../opencores/i2c/rtl/verilog/ -y ../../opencores/spi/rtl/verilog/ -y ../../timing/ -y ../../opencores/8b10b/ -I ../../opencores/spi/rtl/verilog/ -I ../../opencores/i2c/rtl/verilog/ -y ../../simple_gemac u1plus_core.v 2>&1 | grep -v timescale | grep -v coregen | grep -v models +iverilog -Wall -y. -y ../../control_lib/ -y ../../custom/ -y ../../fifo/ -y ../../gpif/ -y ../../models/ -y ../../sdr_lib/ -y ../../coregen/ -y ../../vrt/ -y ../../opencores/i2c/rtl/verilog/ -y ../../opencores/spi/rtl/verilog/ -y ../../timing/ -y ../../opencores/8b10b/ -I ../../opencores/spi/rtl/verilog/ -I ../../opencores/i2c/rtl/verilog/ -y ../../simple_gemac u1plus_core.v 2>&1 | grep -v timescale | grep -v coregen | grep -v models diff --git a/fpga/usrp2/top/B100/timing.ucf b/fpga/usrp2/top/B100/timing.ucf index b2a455f6d..96c47cf2c 100644 --- a/fpga/usrp2/top/B100/timing.ucf +++ b/fpga/usrp2/top/B100/timing.ucf @@ -3,3 +3,12 @@ TIMESPEC "TS_CLK_FPGA_P" = PERIOD "CLK_FPGA_P" 15625 ps HIGH 50 %; NET "IFCLK" TNM_NET = "IFCLK"; TIMESPEC "TS_IFCLK" = PERIOD "IFCLK" 20833 ps HIGH 50 %; + +#constrain FX2 IO +NET "GPIF_D<*>" MAXDELAY = 5.5 ns; +NET "GPIF_CTL<*>" MAXDELAY = 5.5 ns; +NET "GPIF_ADR<*>" MAXDELAY = 5.5ns; +NET "GPIF_SLWR" MAXDELAY = 5.5 ns; +NET "GPIF_SLRD" MAXDELAY = 5.5 ns; +NET "GPIF_SLOE" MAXDELAY = 5.5 ns; +NET "GPIF_PKTEND" MAXDELAY = 5.5 ns; diff --git a/fpga/usrp2/top/B100/u1plus_core.v b/fpga/usrp2/top/B100/u1plus_core.v index c883c5ca8..e335fb8bb 100644 --- a/fpga/usrp2/top/B100/u1plus_core.v +++ b/fpga/usrp2/top/B100/u1plus_core.v @@ -1,5 +1,5 @@ // -// Copyright 2011 Ettus Research LLC +// Copyright 2011-2012 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -23,8 +23,9 @@ module u1plus_core output debug_txd, input debug_rxd, // GPIF - inout [15:0] gpif_d, input [3:0] gpif_ctl, output [3:0] gpif_rdy, - output [2:0] gpif_misc, input gpif_clk, + inout [15:0] gpif_d, input [3:0] gpif_ctl, output gpif_sloe, + output gpif_slwr, output gpif_slrd, output gpif_pktend, output [1:0] gpif_fifoadr, + input gpif_clk, inout db_sda, inout db_scl, output sclk, output [15:0] sen, output mosi, input miso, @@ -37,7 +38,7 @@ module u1plus_core ); localparam TXFIFOSIZE = 11; - localparam RXFIFOSIZE = 11; + localparam RXFIFOSIZE = 12; // 64 total regs in address space localparam SR_RX_CTRL0 = 0; // 9 regs (+0 to +8) @@ -52,9 +53,9 @@ module u1plus_core localparam SR_TX_FRONT = 54; // 5 regs (+0 to +4) localparam SR_REG_TEST32 = 60; // 1 reg - localparam SR_CLEAR_RX_FIFO = 61; // 1 reg - localparam SR_CLEAR_TX_FIFO = 62; // 1 reg + localparam SR_CLEAR_FIFO = 61; // 1 reg localparam SR_GLOBAL_RESET = 63; // 1 reg + localparam SR_USER_REGS = 64; // 2 regs localparam SR_GPIO = 128; // 5 regs @@ -64,11 +65,11 @@ module u1plus_core wire pps_int; wire [63:0] vita_time, vita_time_pps; reg [15:0] reg_cgen_ctrl, reg_test; - - wire [7:0] set_addr; - wire [31:0] set_data; - wire set_stb; - + + wire [7:0] set_addr, set_addr_user; + wire [31:0] set_data, set_data_user; + wire set_stb, set_stb_user; + wire [31:0] debug0; wire [31:0] debug1; @@ -105,68 +106,70 @@ module u1plus_core wire tx_src_rdy, tx_dst_rdy, rx_src_rdy, rx_dst_rdy, tx_err_src_rdy, tx_err_dst_rdy; - wire clear_tx, clear_rx; - - setting_reg #(.my_addr(SR_CLEAR_RX_FIFO), .width(1)) sr_clear_rx - (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(),.changed(clear_rx)); + wire clear_fifo; - setting_reg #(.my_addr(SR_CLEAR_TX_FIFO), .width(1)) sr_clear_tx + setting_reg #(.my_addr(SR_CLEAR_FIFO), .width(1)) sr_clear_fifo (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(),.changed(clear_tx)); + .in(set_data),.out(),.changed(clear_fifo)); - gpif #(.TXFIFOSIZE(TXFIFOSIZE), .RXFIFOSIZE(RXFIFOSIZE)) - gpif (.gpif_clk(gpif_clk), .gpif_rst(gpif_rst), .gpif_d(gpif_d), - .gpif_ctl(gpif_ctl), .gpif_rdy(gpif_rdy), .gpif_misc(gpif_misc), + wire run_rx0, run_rx1; + + slave_fifo #(.TXFIFOSIZE(TXFIFOSIZE), .RXFIFOSIZE(RXFIFOSIZE)) + slave_fifo (.gpif_clk(gpif_clk), .gpif_rst(gpif_rst), .gpif_d(gpif_d), + .gpif_ctl(gpif_ctl), .sloe(gpif_sloe), .slwr(gpif_slwr), .slrd(gpif_slrd), + .pktend(gpif_pktend), .fifoadr(gpif_fifoadr), .wb_clk(wb_clk), .wb_rst(wb_rst), .wb_adr_o(m0_adr), .wb_dat_mosi(m0_dat_mosi), .wb_dat_miso(m0_dat_miso), .wb_sel_o(m0_sel), .wb_cyc_o(m0_cyc), .wb_stb_o(m0_stb), .wb_we_o(m0_we), .wb_ack_i(m0_ack), .triggers(8'd0), - .fifo_clk(wb_clk), .fifo_rst(wb_rst), .clear_tx(clear_tx), .clear_rx(clear_rx), + .dsp_rx_run(run_rx0 | run_rx1), + + .fifo_clk(wb_clk), .fifo_rst(wb_rst), .clear_tx(clear_fifo), .clear_rx(clear_fifo), .tx_data_o(tx_data), .tx_src_rdy_o(tx_src_rdy), .tx_dst_rdy_i(tx_dst_rdy), .rx_data_i(rx_data), .rx_src_rdy_i(rx_src_rdy), .rx_dst_rdy_o(rx_dst_rdy), .tx_err_data_i(tx_err_data), .tx_err_src_rdy_i(tx_err_src_rdy), .tx_err_dst_rdy_o(tx_err_dst_rdy), .tx_underrun(tx_underrun_gpif), .rx_overrun(rx_overrun_gpif), - .frames_per_packet(frames_per_packet), + .test_len(0), .test_rate(0), .test_ctrl(0), .debug0(debug0), .debug1(debug1)); // ///////////////////////////////////////////////////////////////////////// // RX ADC Frontend, does IQ Balance, DC Offset, muxing - wire [23:0] adc_i, adc_q; // 24 bits is total overkill here, but it matches u2/u2p - wire run_rx0, run_rx1; - + wire [23:0] rx_fe_i, rx_fe_q; // 24 bits is total overkill here, but it matches u2/u2p + rx_frontend #(.BASE(SR_RX_FRONT)) rx_frontend (.clk(wb_clk),.rst(wb_rst), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), .adc_a({rx_i,4'b00}),.adc_ovf_a(0), .adc_b({rx_q,4'b00}),.adc_ovf_b(0), - .i_out(adc_i), .q_out(adc_q), .run(run_rx0 | run_rx1), .debug()); + .i_out(rx_fe_i), .q_out(rx_fe_q), .run(run_rx0 | run_rx1), .debug()); // ///////////////////////////////////////////////////////////////////////// // DSP RX 0 wire [31:0] sample_rx0; - wire strobe_rx0; + wire strobe_rx0, clear_rx0; wire [35:0] vita_rx_data0; wire vita_rx_src_rdy0, vita_rx_dst_rdy0; - dsp_core_rx #(.BASE(SR_RX_DSP0)) dsp_core_rx0 - (.clk(wb_clk),.rst(wb_rst), + ddc_chain #(.BASE(SR_RX_DSP0), .DSPNO(0)) ddc_chain0 + (.clk(wb_clk), .rst(wb_rst), .clr(clear_rx0), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), - .adc_i(adc_i),.adc_ovf_i(0),.adc_q(adc_q),.adc_ovf_q(0), + .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), + .rx_fe_i(rx_fe_i),.rx_fe_q(rx_fe_q), .sample(sample_rx0), .run(run_rx0), .strobe(strobe_rx0), .debug() ); - vita_rx_chain #(.BASE(SR_RX_CTRL0), .UNIT(0), .FIFOSIZE(10), .PROT_ENG_FLAGS(0)) vita_rx_chain0 - (.clk(wb_clk),.reset(wb_rst),.clear(clear_rx), + vita_rx_chain #(.BASE(SR_RX_CTRL0), .UNIT(0), .FIFOSIZE(10), .PROT_ENG_FLAGS(0), .DSP_NUMBER(0)) vita_rx_chain0 + (.clk(wb_clk),.reset(wb_rst), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), .vita_time(vita_time), .overrun(rx_overrun_dsp0), - .sample(sample_rx0), .run(run_rx0), .strobe(strobe_rx0), + .sample(sample_rx0), .run(run_rx0), .strobe(strobe_rx0), .clear_o(clear_rx0), .rx_data_o(vita_rx_data0), .rx_dst_rdy_i(vita_rx_dst_rdy0), .rx_src_rdy_o(vita_rx_src_rdy0), .debug() ); @@ -174,22 +177,24 @@ module u1plus_core // DSP RX 1 wire [31:0] sample_rx1; - wire strobe_rx1; + wire strobe_rx1, clear_rx1; wire [35:0] vita_rx_data1; wire vita_rx_src_rdy1, vita_rx_dst_rdy1; - dsp_core_rx #(.BASE(SR_RX_DSP1)) dsp_core_rx1 - (.clk(wb_clk),.rst(wb_rst), + ddc_chain #(.BASE(SR_RX_DSP1), .DSPNO(1)) ddc_chain1 + (.clk(wb_clk),.rst(wb_rst), .clr(clear_rx1), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), - .adc_i(adc_i),.adc_ovf_i(0),.adc_q(adc_q),.adc_ovf_q(0), + .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), + .rx_fe_i(rx_fe_i),.rx_fe_q(rx_fe_q), .sample(sample_rx1), .run(run_rx1), .strobe(strobe_rx1), .debug() ); - vita_rx_chain #(.BASE(SR_RX_CTRL1), .UNIT(1), .FIFOSIZE(10), .PROT_ENG_FLAGS(0)) vita_rx_chain1 - (.clk(wb_clk),.reset(wb_rst),.clear(clear_rx), + vita_rx_chain #(.BASE(SR_RX_CTRL1), .UNIT(1), .FIFOSIZE(10), .PROT_ENG_FLAGS(0), .DSP_NUMBER(1)) vita_rx_chain1 + (.clk(wb_clk),.reset(wb_rst), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), .vita_time(vita_time), .overrun(rx_overrun_dsp1), - .sample(sample_rx1), .run(run_rx1), .strobe(strobe_rx1), + .sample(sample_rx1), .run(run_rx1), .strobe(strobe_rx1), .clear_o(clear_rx1), .rx_data_o(vita_rx_data1), .rx_dst_rdy_i(vita_rx_dst_rdy1), .rx_src_rdy_o(vita_rx_src_rdy1), .debug() ); @@ -197,7 +202,7 @@ module u1plus_core // RX Stream muxing fifo36_mux #(.prio(0)) mux_data_streams - (.clk(wb_clk), .reset(wb_rst), .clear(0), + (.clk(wb_clk), .reset(wb_rst), .clear(clear_fifo), .data0_i(vita_rx_data0), .src0_rdy_i(vita_rx_src_rdy0), .dst0_rdy_o(vita_rx_dst_rdy0), .data1_i(vita_rx_data1), .src1_rdy_i(vita_rx_src_rdy1), .dst1_rdy_o(vita_rx_dst_rdy1), .data_o(rx_data), .src_rdy_o(rx_src_rdy), .dst_rdy_i(rx_dst_rdy)); @@ -205,27 +210,38 @@ module u1plus_core // /////////////////////////////////////////////////////////////////////////////////// // DSP TX - wire [23:0] tx_i_int, tx_q_int; wire run_tx; - - vita_tx_chain #(.BASE_CTRL(SR_TX_CTRL), .BASE_DSP(SR_TX_DSP), + wire [23:0] tx_fe_i, tx_fe_q; + wire [31:0] sample_tx; + wire strobe_tx, clear_tx; + + vita_tx_chain #(.BASE(SR_TX_CTRL), .FIFOSIZE(10), .POST_ENGINE_FIFOSIZE(11), .REPORT_ERROR(1), .DO_FLOW_CONTROL(0), .PROT_ENG_FLAGS(0), .USE_TRANS_HEADER(0), .DSP_NUMBER(0)) vita_tx_chain (.clk(wb_clk), .reset(wb_rst), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), .vita_time(vita_time), .tx_data_i(tx_data), .tx_src_rdy_i(tx_src_rdy), .tx_dst_rdy_o(tx_dst_rdy), .err_data_o(tx_err_data), .err_src_rdy_o(tx_err_src_rdy), .err_dst_rdy_i(tx_err_dst_rdy), - .tx_i(tx_i_int),.tx_q(tx_q_int), - .underrun(tx_underrun_dsp), .run(run_tx), + .sample(sample_tx), .strobe(strobe_tx), + .underrun(tx_underrun_dsp), .run(run_tx), .clear_o(clear_tx), .debug(debug_vt)); + duc_chain #(.BASE(SR_TX_DSP), .DSPNO(0)) duc_chain + (.clk(wb_clk), .rst(wb_rst), .clr(clear_tx), + .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), + .tx_fe_i(tx_fe_i),.tx_fe_q(tx_fe_q), + .sample(sample_tx), .run(run_tx), .strobe(strobe_tx), + .debug() ); + tx_frontend #(.BASE(SR_TX_FRONT), .WIDTH_OUT(14)) tx_frontend (.clk(wb_clk), .rst(wb_rst), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), - .tx_i(tx_i_int), .tx_q(tx_q_int), .run(1'b1), + .tx_i(tx_fe_i), .tx_q(tx_fe_q), .run(1'b1), .dac_a(tx_i), .dac_b(tx_q)); // ///////////////////////////////////////////////////////////////////////////////////// @@ -387,11 +403,17 @@ module u1plus_core .wb_stb_i(s8_stb),.wb_we_i(s8_we),.wb_ack_o(s8_ack), .strobe(set_stb),.addr(set_addr),.data(set_data) ); + user_settings #(.BASE(SR_USER_REGS)) user_settings + (.clk(wb_clk),.rst(wb_rst),.set_stb(set_stb), + .set_addr(set_addr),.set_data(set_data), + .set_addr_user(set_addr_user),.set_data_user(set_data_user), + .set_stb_user(set_stb_user) ); + // ///////////////////////////////////////////////////////////////////////// // Readback mux 32 -- Slave #7 //compatibility number -> increment when the fpga has been sufficiently altered - localparam compat_num = {16'd8, 16'd1}; //major, minor + localparam compat_num = {16'd9, 16'd0}; //major, minor wire [31:0] reg_test32; @@ -416,7 +438,7 @@ module u1plus_core // ///////////////////////////////////////////////////////////////////////// // VITA Timing - time_64bit #(.TICKS_PER_SEC(32'd64000000),.BASE(SR_TIME64)) time_64bit + time_64bit #(.BASE(SR_TIME64)) time_64bit (.clk(wb_clk), .rst(wb_rst), .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data), .pps(pps_in), .vita_time(vita_time), .vita_time_pps(vita_time_pps), .pps_int(pps_int), .exp_time_in(0)); |