diff options
Diffstat (limited to 'fpga/usrp2/simple_gemac/simple_gemac_wrapper_f36_tb.v')
-rw-r--r-- | fpga/usrp2/simple_gemac/simple_gemac_wrapper_f36_tb.v | 243 |
1 files changed, 243 insertions, 0 deletions
diff --git a/fpga/usrp2/simple_gemac/simple_gemac_wrapper_f36_tb.v b/fpga/usrp2/simple_gemac/simple_gemac_wrapper_f36_tb.v new file mode 100644 index 000000000..804fa8748 --- /dev/null +++ b/fpga/usrp2/simple_gemac/simple_gemac_wrapper_f36_tb.v @@ -0,0 +1,243 @@ + + +module simple_gemac_wrapper_f36_tb; +`include "eth_tasks_f36.v" + + reg clk = 0; + reg reset = 1; + + initial #1000 reset = 0; + always #50 clk = ~clk; + + reg wb_clk = 0; + wire wb_rst = reset; + always #173 wb_clk = ~wb_clk; + + wire GMII_RX_DV, GMII_RX_ER, GMII_TX_EN, GMII_TX_ER, GMII_GTX_CLK; + wire [7:0] GMII_RXD, GMII_TXD; + + wire rx_valid, rx_error, rx_ack; + wire tx_ack, tx_valid, tx_error; + + wire [7:0] rx_data, tx_data; + + reg [15:0] pause_time; + reg pause_req = 0; + + wire GMII_RX_CLK = GMII_GTX_CLK; + + reg [7:0] FORCE_DAT_ERR = 0; + reg FORCE_ERR = 0; + + // Loopback + assign GMII_RX_DV = GMII_TX_EN; + assign GMII_RX_ER = GMII_TX_ER | FORCE_ERR; + assign GMII_RXD = GMII_TXD ^ FORCE_DAT_ERR; + + + wire rx_ll_sof, rx_ll_eof, rx_ll_src_rdy, rx_ll_dst_rdy; + wire rx_ll_sof2, rx_ll_eof2, rx_ll_src_rdy2; + wire rx_ll_dst_rdy2; + wire [7:0] rx_ll_data, rx_ll_data2; + wire rx_ll_error, rx_ll_error2; + + wire [31:0] wb_dat_o; + reg [31:0] wb_dat_i; + reg [7:0] wb_adr; + reg wb_stb=0, wb_cyc=0, wb_we=0; + wire wb_ack; + + reg [35:0] tx_f36_dat; + reg tx_f36_src_rdy; + wire tx_f36_dst_rdy; + + wire [35:0] rx_f36_dat; + wire rx_f36_src_rdy; + reg rx_f36_dst_rdy = 1; + + simple_gemac_wrapper simple_gemac_wrapper + (.clk125(clk), .reset(reset), + .GMII_GTX_CLK(GMII_GTX_CLK), .GMII_TX_EN(GMII_TX_EN), + .GMII_TX_ER(GMII_TX_ER), .GMII_TXD(GMII_TXD), + .GMII_RX_CLK(GMII_RX_CLK), .GMII_RX_DV(GMII_RX_DV), + .GMII_RX_ER(GMII_RX_ER), .GMII_RXD(GMII_RXD), + .pause_req(pause_req), .pause_time(pause_time), + .rx_clk(rx_clk), .rx_ll_data(rx_ll_data), .rx_ll_sof(rx_ll_sof), + .rx_ll_eof(rx_ll_eof), .rx_ll_src_rdy(rx_ll_src_rdy), .rx_ll_dst_rdy(rx_ll_dst_rdy), + .tx_clk(tx_clk), .tx_ll_data(tx_ll_data), .tx_ll_sof(tx_ll_sof), + .tx_ll_eof(tx_ll_eof), .tx_ll_src_rdy(tx_ll_src_rdy), .tx_ll_dst_rdy(tx_ll_dst_rdy), + .wb_clk(wb_clk), .wb_rst(wb_rst), .wb_stb(wb_stb), .wb_cyc(wb_cyc), .wb_ack(wb_ack), + .wb_we(wb_we), .wb_adr(wb_adr), .wb_dat_i(wb_dat_i), .wb_dat_o(wb_dat_o), + .mdio(mdio), .mdc(mdc) ); + + wire rx_ll_dst_rdy2_n; + assign rx_ll_dst_rdy2 = ~rx_ll_dst_rdy2_n; + + ll8_shortfifo rx_sfifo + (.clk(clk), .reset(reset), .clear(0), + .datain(rx_ll_data), .sof_i(rx_ll_sof), .eof_i(rx_ll_eof), + .error_i(rx_ll_error), .src_rdy_i(rx_ll_src_rdy), .dst_rdy_o(rx_ll_dst_rdy), + .dataout(rx_ll_data2), .sof_o(rx_ll_sof2), .eof_o(rx_ll_eof2), + .error_o(rx_ll_error2), .src_rdy_o(rx_ll_src_rdy2), .dst_rdy_i(rx_ll_dst_rdy2)); + + ll8_to_fifo36 ll8_to_fifo36 + (.clk(clk), .reset(reset), .clear(0), + .ll_data(rx_ll_data2), .ll_sof_n(~rx_ll_sof2), .ll_eof_n(~rx_ll_eof2), + .ll_src_rdy_n(~rx_ll_src_rdy2), .ll_dst_rdy_n(rx_ll_dst_rdy2_n), + .f36_data(rx_f36_dat), .f36_src_rdy_o(rx_f36_src_rdy), .f36_dst_rdy_i(rx_f36_dst_rdy)); + + wire tx_ll_sof, tx_ll_eof, tx_ll_src_rdy, tx_ll_dst_rdy; + wire tx_ll_sof2_n, tx_ll_eof2_n; + wire tx_ll_src_rdy2_n, tx_ll_dst_rdy2; + wire [7:0] tx_ll_data, tx_ll_data2; + wire tx_ll_error; + wire tx_ll_error2 = 0; + + fifo36_to_ll8 fifo36_to_ll8 + (.clk(clk), .reset(reset), .clear(clear), + .f36_data(tx_f36_dat), .f36_src_rdy_i(tx_f36_src_rdy), .f36_dst_rdy_o(tx_f36_dst_rdy), + .ll_data(tx_ll_data2), .ll_sof_n(tx_ll_sof2_n), .ll_eof_n(tx_ll_eof2_n), + .ll_src_rdy_n(tx_ll_src_rdy2_n), .ll_dst_rdy_n(~tx_ll_dst_rdy2)); + + ll8_shortfifo tx_sfifo + (.clk(clk), .reset(reset), .clear(clear), + .datain(tx_ll_data2), .sof_i(~tx_ll_sof2_n), .eof_i(~tx_ll_eof2_n), + .error_i(tx_ll_error2), .src_rdy_i(~tx_ll_src_rdy2_n), .dst_rdy_o(tx_ll_dst_rdy2), + .dataout(tx_ll_data), .sof_o(tx_ll_sof), .eof_o(tx_ll_eof), + .error_o(tx_ll_error), .src_rdy_o(tx_ll_src_rdy), .dst_rdy_i(tx_ll_dst_rdy)); + + initial $dumpfile("simple_gemac_wrapper_f36_tb.vcd"); + initial $dumpvars(0,simple_gemac_wrapper_f36_tb); + + integer i; + reg [7:0] pkt_rom[0:65535]; + reg [1023:0] ROMFile; + + initial + for (i=0;i<65536;i=i+1) + pkt_rom[i] <= 8'h0; + + initial + begin + @(negedge reset); + repeat (10) + @(posedge clk); + WishboneWR(0,6'b111001); + WishboneWR(4,16'hF1F2); + WishboneWR(8,32'hF3F4_F5F6); + WishboneWR(12,16'h0000); + WishboneWR(16,32'h0000_0000); + + @(posedge clk); + SendFlowCtrl(16'h0007); // Send flow control + @(posedge clk); + #30000; + @(posedge clk); + SendFlowCtrl(16'h0009); // Increase flow control before it expires + #10000; + @(posedge clk); + SendFlowCtrl(16'h0000); // Cancel flow control before it expires + @(posedge clk); + + SendPacket_to_fifo36(8'hAA,10); // This packet gets dropped by the filters + repeat (10) + @(posedge clk); + + SendPacketFromFile_fifo36(60,0,0); // The rest are valid packets + repeat (10) + @(posedge clk); + + SendPacketFromFile_fifo36(61,0,0); + repeat (10) + @(posedge clk); + SendPacketFromFile_fifo36(62,0,0); + repeat (10) + @(posedge clk); + SendPacketFromFile_fifo36(63,0,0); + repeat (1) + @(posedge clk); + SendPacketFromFile_fifo36(64,0,0); + repeat (10) + @(posedge clk); + SendPacketFromFile_fifo36(59,0,0); + repeat (1) + @(posedge clk); + SendPacketFromFile_fifo36(58,0,0); + repeat (1) + @(posedge clk); + SendPacketFromFile_fifo36(100,0,0); + repeat (1) + @(posedge clk); + SendPacketFromFile_fifo36(200,150,30); // waiting 14 empties the fifo, 15 underruns + repeat (1) + @(posedge clk); + SendPacketFromFile_fifo36(100,0,30); + #10000 $finish; + end +/* + // Force a CRC error + initial + begin + #90000; + @(posedge clk); + FORCE_DAT_ERR <= 8'h10; + @(posedge clk); + FORCE_DAT_ERR <= 8'h00; + end + + // Force an RX_ER error (i.e. link loss) + initial + begin + #116000; + @(posedge clk); + FORCE_ERR <= 1; + @(posedge clk); + FORCE_ERR <= 0; + end + + // Cause receive fifo to fill, causing an RX overrun + initial + begin + #126000; + @(posedge clk); + rx_f36_dst_rdy <= 0; + repeat (30) // Repeat of 14 fills the shortfifo, but works. 15 overflows + @(posedge clk); + rx_f36_dst_rdy <= 1; + end + */ + // Tests: Send and recv flow control, send and receive good packets, RX CRC err, RX_ER, RX overrun, TX underrun + // Still need to test: CRC errors on Pause Frames, MDIO, wishbone + + task WishboneWR; + input [7:0] adr; + input [31:0] value; + begin + wb_adr <= adr; + wb_dat_i <= value; + wb_stb <= 1; + wb_cyc <= 1; + wb_we <= 1; + while (~wb_ack) + @(posedge wb_clk); + @(posedge wb_clk); + wb_stb <= 0; + wb_cyc <= 0; + wb_we <= 0; + end + endtask // WishboneWR + + always @(posedge clk) + if(rx_f36_src_rdy & rx_f36_dst_rdy) + begin + if(rx_f36_dat[32] & ~rx_f36_dat[33]) + $display("RX-PKT-START %d",$time); + $display("RX-PKT SOF %d EOF %d ERR %d OCC %d DAT %x",rx_f36_dat[32],rx_f36_dat[33], + &rx_f36_dat[33:32],rx_f36_dat[35:34],rx_f36_dat[31:0]); + if(rx_f36_dat[33] & ~rx_f36_dat[32]) + $display("RX-PKT-END %d",$time); + if(rx_f36_dat[33] & rx_f36_dat[32]) + $display("RX-PKT-ERROR %d",$time); + end + +endmodule // simple_gemac_wrapper_tb |