diff options
Diffstat (limited to 'fpga/usrp2/sdr_lib/small_hb_dec_tb.v')
| -rw-r--r-- | fpga/usrp2/sdr_lib/small_hb_dec_tb.v | 157 |
1 files changed, 0 insertions, 157 deletions
diff --git a/fpga/usrp2/sdr_lib/small_hb_dec_tb.v b/fpga/usrp2/sdr_lib/small_hb_dec_tb.v deleted file mode 100644 index 1e713321a..000000000 --- a/fpga/usrp2/sdr_lib/small_hb_dec_tb.v +++ /dev/null @@ -1,157 +0,0 @@ -// -// Copyright 2011 Ettus Research LLC -// -// This program is free software: you can redistribute it and/or modify -// it under the terms of the GNU General Public License as published by -// the Free Software Foundation, either version 3 of the License, or -// (at your option) any later version. -// -// This program is distributed in the hope that it will be useful, -// but WITHOUT ANY WARRANTY; without even the implied warranty of -// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -// GNU General Public License for more details. -// -// You should have received a copy of the GNU General Public License -// along with this program. If not, see <http://www.gnu.org/licenses/>. -// - -module hb_dec_tb( ) ; - - // Parameters for instantiation - parameter clocks = 9'd2 ; // Number of clocks per input - parameter decim = 1 ; // Sets the filter to decimate - parameter rate = 2 ; // Sets the decimation rate - - reg clock ; - reg reset ; - reg enable ; - reg strobe_in ; - reg signed [17:0] data_in ; - wire strobe_out ; - wire signed [17:0] data_out ; - - initial - begin - $dumpfile("hb_dec_tb.vcd"); - $dumpvars(0,hb_dec_tb); - end - - // Setup the clock - initial clock = 1'b0 ; - always #5 clock <= ~clock ; - - // Come out of reset after a while - initial reset = 1'b1 ; - initial #1000 reset = 1'b0 ; - - // Enable the entire system - initial enable = 1'b1 ; - - // Instantiate UUT - /* - halfband_ideal - #( - .decim ( decim ), - .rate ( rate ) - ) uut( - .clock ( clock ), - .reset ( reset ), - .enable ( enable ), - .strobe_in ( strobe_in ), - .data_in ( data_in ), - .strobe_out ( strobe_out ), - .data_out ( data_out ) - ) ; - */ - - - small_hb_dec #(.WIDTH(18)) uut - (.clk(clock),.rst(reset),.bypass(0),.stb_in(strobe_in),.data_in(data_in), - .stb_out(strobe_out),.data_out(data_out) ); - - integer i, ri, ro, infile, outfile ; - - always @(posedge clock) - begin - if(strobe_out) - $display(data_out); - end - - // Setup file IO - initial begin - infile = $fopen("input.dat","r") ; - outfile = $fopen("output.dat","r") ; - $timeformat(-9, 2, " ns", 10) ; - end - - reg endofsim ; - reg signed [17:0] compare ; - integer noe ; - initial noe = 0 ; - - initial begin - // Initialize inputs - strobe_in <= 1'd0 ; - data_in <= 18'd0 ; - - // Wait for reset to go away - @(negedge reset) #0 ; - - // While we're still simulating ... - while( !endofsim ) begin - - // Write the input from the file or 0 if EOF... - @( posedge clock ) begin - //#1 ; - strobe_in <= 1'b1 ; - if( !$feof(infile) ) - ri = $fscanf( infile, "%d", data_in ) ; - else - data_in <= 18'd0 ; - end - - // Clocked in - set the strobe to 0 if the number of - // clocks per sample is greater than 1 - if( clocks > 1 ) begin - @(posedge clock) begin - strobe_in <= 1'b0 ; - end - - // Wait for the specified number of cycles - for( i = 0 ; i < (clocks-2) ; i = i + 1 ) begin - @(posedge clock) #1 ; - end - end - end - - // Print out the number of errors that occured - if( noe ) - $display( "FAILED: %d errors during simulation", noe ) ; - else - $display( "PASSED: Simulation successful" ) ; - - $finish ; - end - - // Output comparison of simulated values versus known good values - always @ (posedge clock) begin - if( reset ) - endofsim <= 1'b0 ; - else begin - if( !$feof(outfile) ) begin - if( strobe_out ) begin - ro = $fscanf( outfile, "%d\n", compare ) ; - if( compare != data_out ) begin - //$display( "%t: %d != %d", $realtime, data_out, compare ) ; - noe = noe + 1 ; - end - end - end else begin - // Signal end of simulation when no more outputs - endofsim <= 1'b1 ; - end - end - end - -endmodule // hb_dec_tb - |