1 files changed, 0 insertions, 92 deletions
diff --git a/fpga/usrp2/sdr_lib/hb/hbd_tb/test_hbd.v b/fpga/usrp2/sdr_lib/hb/hbd_tb/test_hbd.v
deleted file mode 100644
index 450f90e66..000000000
--- a/fpga/usrp2/sdr_lib/hb/hbd_tb/test_hbd.v
+++ /dev/null
@@ -1,92 +0,0 @@
-//
-// Copyright 2011 Ettus Research LLC
-//
-// This program is free software: you can redistribute it and/or modify
-// it under the terms of the GNU General Public License as published by
-// the Free Software Foundation, either version 3 of the License, or
-// (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-// GNU General Public License for more details.
-//
-// You should have received a copy of the GNU General Public License
-// along with this program.  If not, see <http://www.gnu.org/licenses/>.
-//
-
-
-
-module test_hbd();
-
-   reg clock;
-   initial clock = 1'b0;
-   always #5 clock <= ~clock;
-
-   reg reset;
-   initial reset = 1'b1;
-   initial #1000 reset = 1'b0;
-   
-   initial $dumpfile("test_hbd.vcd");
-   initial $dumpvars(0,test_hbd);
-
-   reg [15:0] i_in, q_in;
-   wire [15:0] i_out, q_out;
-
-   reg 	       strobe_in;
-   wire        strobe_out;
-   reg 	       coeff_write;
-   reg [15:0]  coeff_data;
-   reg [4:0]   coeff_addr;
-   
-   halfband_decim halfband_decim 
-     ( .clock(clock),.reset(reset),.enable(),.strobe_in(strobe_in),.strobe_out(strobe_out),
-       .data_in(i_in),.data_out(i_out) );
-   
-   always @(posedge strobe_out)
-     if(i_out[15])
-       $display("-%d",65536-i_out);
-     else
-       $display("%d",i_out);
-
-   initial
-     begin
-	strobe_in = 1'b0;
-	@(negedge reset);
-	@(posedge clock);
-	while(1)
-	  begin
-	     strobe_in <= #1 1'b1;
-	     @(posedge clock);
-	     strobe_in <= #1 1'b0;
-	     repeat (`RATE)
-	       @(posedge clock);
-	  end
-     end
-
-   initial #10000000 $finish;    // Just in case...
-
-   initial
-     begin
-	i_in <= #1 16'd0;
-	repeat (40) @(posedge strobe_in);
-	i_in <= #1 16'd16384;
-	@(posedge strobe_in);
-	i_in <= #1 16'd0;
-	repeat (40) @(posedge strobe_in);
-	i_in <= #1 16'd16384;
-	@(posedge strobe_in);
-	i_in <= #1 16'd0;
-	repeat (40) @(posedge strobe_in);
-	i_in <= #1 16'd16384;
-	repeat (40) @(posedge strobe_in);
-	i_in <= #1 16'd0;
-	repeat (41) @(posedge strobe_in);
-	i_in <= #1 16'd16384;
-	repeat (40) @(posedge strobe_in);
-	i_in <= #1 16'd0;
-	repeat (40) @(posedge strobe_in);
-	repeat (7) @(posedge clock);
-	$finish;
-     end // initial begin
-endmodule // test_hb