diff options
Diffstat (limited to 'fpga/usrp2/sdr_lib/dsp_tx_glue.v')
| -rw-r--r-- | fpga/usrp2/sdr_lib/dsp_tx_glue.v | 98 |
1 files changed, 98 insertions, 0 deletions
diff --git a/fpga/usrp2/sdr_lib/dsp_tx_glue.v b/fpga/usrp2/sdr_lib/dsp_tx_glue.v new file mode 100644 index 000000000..46f6789ee --- /dev/null +++ b/fpga/usrp2/sdr_lib/dsp_tx_glue.v @@ -0,0 +1,98 @@ +// +// Copyright 2012 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +//The following module effects the IO of the DUC chain. +//By default, this entire module is a simple pass-through. + +module dsp_tx_glue +#( + //the dsp unit number: 0, 1, 2... + parameter DSPNO = 0, + + //frontend bus width + parameter WIDTH = 24 +) +( + //control signals + input clock, input reset, input clear, input enable, + + //user settings bus, controlled through user setting regs API + input set_stb, input [7:0] set_addr, input [31:0] set_data, + + //full rate outputs directly to the TX frontend + output [WIDTH-1:0] frontend_i, + output [WIDTH-1:0] frontend_q, + + //full rate outputs directly from the DUC chain + input [WIDTH-1:0] duc_out_i, + input [WIDTH-1:0] duc_out_q, + + //strobed samples {I16,Q16} to the TX DUC chain + output [31:0] duc_in_sample, + input duc_in_strobe, //this is a backpressure signal + output duc_in_enable, //enables DUC module + + //strobbed baseband samples {I16,Q16} to this module + input [31:0] bb_sample, + output bb_strobe, //this is a backpressure signal + + //debug output (optional) + output [31:0] debug +); + + generate + if (DSPNO==0) begin + `ifndef TX_DSP0_MODULE + assign frontend_i = duc_out_i; + assign frontend_q = duc_out_q; + assign duc_in_sample = bb_sample; + assign bb_strobe = duc_in_strobe; + assign duc_in_enable = enable; + `else + `TX_DSP0_MODULE #(.WIDTH(WIDTH)) tx_dsp0_custom + ( + .clock(clock), .reset(reset), .clear(clear), .enable(enable), + .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data), + .frontend_i(frontend_i), .frontend_q(frontend_q), + .duc_out_i(duc_out_i), .duc_out_q(duc_out_q), + .duc_in_sample(duc_in_sample), .duc_in_strobe(duc_in_strobe), .duc_in_enable(duc_in_enable), + .bb_sample(bb_sample), .bb_strobe(bb_strobe) + ); + `endif + end + else begin + `ifndef TX_DSP1_MODULE + assign frontend_i = duc_out_i; + assign frontend_q = duc_out_q; + assign duc_in_sample = bb_sample; + assign bb_strobe = duc_in_strobe; + assign duc_in_enable = enable; + `else + `TX_DSP1_MODULE #(.WIDTH(WIDTH)) tx_dsp1_custom + ( + .clock(clock), .reset(reset), .clear(clear), .enable(enable), + .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data), + .frontend_i(frontend_i), .frontend_q(frontend_q), + .duc_out_i(duc_out_i), .duc_out_q(duc_out_q), + .duc_in_sample(duc_in_sample), .duc_in_strobe(duc_in_strobe), .duc_in_enable(duc_in_enable), + .bb_sample(bb_sample), .bb_strobe(bb_strobe) + ); + `endif + end + endgenerate + +endmodule //dsp_tx_glue |