1 files changed, 0 insertions, 63 deletions
diff --git a/fpga/usrp2/control_lib/user_settings.v b/fpga/usrp2/control_lib/user_settings.v
deleted file mode 100644
index d87f1de21..000000000
--- a/fpga/usrp2/control_lib/user_settings.v
+++ /dev/null
@@ -1,63 +0,0 @@
-//
-// Copyright 2012 Ettus Research LLC
-//
-// This program is free software: you can redistribute it and/or modify
-// it under the terms of the GNU General Public License as published by
-// the Free Software Foundation, either version 3 of the License, or
-// (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-// GNU General Public License for more details.
-//
-// You should have received a copy of the GNU General Public License
-// along with this program.  If not, see <http://www.gnu.org/licenses/>.
-//
-
-// User settings bus
-//
-// Provides 8-bit address, 32-bit data write only bus for user settings, consumes to addresses in
-// normal settings bus.
-//
-// Write user address to BASE
-// Write user data to BASE+1
-//
-// The user_set_stb will strobe after data write, must write new address even if same as previous one.
-
-module user_settings
-  #(parameter BASE=0)
-  (input clk,
-   input rst,
-
-   input         set_stb,
-   input [7:0]   set_addr,
-   input [31:0]  set_data,
-
-   output        set_stb_user,
-   output [7:0]  set_addr_user,
-   output [31:0] set_data_user
-   );
-
-   wire 	 addr_changed, data_changed;
-   reg 		 stb_int;
-   
-   setting_reg #(.my_addr(BASE+0),.width(8)) sr_0
-     (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),
-      .in(set_data),.out(set_addr_user),.changed(addr_changed) );
-   
-   setting_reg #(.my_addr(BASE+1)) sr_1
-     (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),
-      .in(set_data),.out(set_data_user),.changed(data_changed) );
-   
-   always @(posedge clk)
-     if (rst|set_stb_user)
-       stb_int <= 0;
-     else
-       if (addr_changed)
-         stb_int <= 1;
-   
-   assign set_stb_user = stb_int & data_changed;
-   
-endmodule // user_settings
-