1 files changed, 0 insertions, 71 deletions
diff --git a/fpga/usrp2/control_lib/settings_bus_16LE.v b/fpga/usrp2/control_lib/settings_bus_16LE.v
deleted file mode 100644
index 7c42a0870..000000000
--- a/fpga/usrp2/control_lib/settings_bus_16LE.v
+++ /dev/null
@@ -1,71 +0,0 @@
-//
-// Copyright 2011 Ettus Research LLC
-//
-// This program is free software: you can redistribute it and/or modify
-// it under the terms of the GNU General Public License as published by
-// the Free Software Foundation, either version 3 of the License, or
-// (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-// GNU General Public License for more details.
-//
-// You should have received a copy of the GNU General Public License
-// along with this program.  If not, see <http://www.gnu.org/licenses/>.
-//
-
-
-// Grab settings off the wishbone bus, send them out to settings bus
-// 16 bits little endian, but all registers need to be written 32 bits at a time.
-// This means that you write the low 16 bits first and then the high 16 bits.
-// The setting regs are strobed when the high 16 bits are written
-
-module settings_bus_16LE
-  #(parameter AWIDTH=16, RWIDTH=8)
-    (input wb_clk, 
-     input wb_rst, 
-     input [AWIDTH-1:0] wb_adr_i,
-     input [15:0] wb_dat_i,
-     input wb_stb_i,
-     input wb_we_i,
-     output reg wb_ack_o,
-     output strobe,
-     output reg [7:0] addr,
-     output reg [31:0] data);
-
-   reg 		       stb_int;
-   
-   always @(posedge wb_clk)
-     if(wb_rst)
-       begin
-	  stb_int <= 1'b0;
-	  addr <= 8'd0;
-	  data <= 32'd0;
-       end
-     else if(wb_we_i & wb_stb_i)
-       begin
-	  addr <= wb_adr_i[RWIDTH+1:2];  // Zero pad high bits
-	  if(wb_adr_i[1])
-	    begin
-	       stb_int <= 1'b1;     // We now have both halves
-	       data[31:16] <= wb_dat_i;
-	    end
-	  else
-	    begin
-	       stb_int <= 1'b0;     // Don't strobe, we need other half
-	       data[15:0] <= wb_dat_i;
-	    end
-       end
-     else
-       stb_int <= 1'b0;
-
-   always @(posedge wb_clk)
-     if(wb_rst)
-       wb_ack_o <= 0;
-     else
-       wb_ack_o <= wb_stb_i & ~wb_ack_o;
-
-   assign strobe = stb_int & wb_ack_o;
-          
-endmodule // settings_bus_16LE