1 files changed, 0 insertions, 79 deletions
diff --git a/fpga/usrp2/control_lib/atr_controller16.v b/fpga/usrp2/control_lib/atr_controller16.v
deleted file mode 100644
index 578da4a5c..000000000
--- a/fpga/usrp2/control_lib/atr_controller16.v
+++ /dev/null
@@ -1,79 +0,0 @@
-//
-// Copyright 2011 Ettus Research LLC
-//
-// This program is free software: you can redistribute it and/or modify
-// it under the terms of the GNU General Public License as published by
-// the Free Software Foundation, either version 3 of the License, or
-// (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-// GNU General Public License for more details.
-//
-// You should have received a copy of the GNU General Public License
-// along with this program.  If not, see <http://www.gnu.org/licenses/>.
-//
-
-
-// Automatic transmit/receive switching of control pins to daughterboards
-// Store everything in registers for now, but could use a RAM for more
-// complex state machines in the future
-
-module atr_controller16
-  (input clk_i, input rst_i,
-   input [5:0] adr_i, input [1:0] sel_i, input [15:0] dat_i, output [15:0] dat_o,
-   input we_i, input stb_i, input cyc_i, output reg ack_o,
-   input run_rx, input run_tx,
-   output [31:0] ctrl_lines);
-   
-   reg [3:0] state;
-   reg [31:0] atr_ram [0:15];  // DP distributed RAM
-
-   wire [3:0] sel_int = { (sel_i[1] & adr_i[1]), (sel_i[0] & adr_i[1]),
-			  (sel_i[1] & ~adr_i[1]), (sel_i[0] & ~adr_i[1]) };
-   
-   // WB Interface
-   always @(posedge clk_i)
-     if(we_i & stb_i & cyc_i)
-       begin
-	  if(sel_int[3])
-	    atr_ram[adr_i[5:2]][31:24] <= dat_i[15:8];
-	  if(sel_int[2])
-	    atr_ram[adr_i[5:2]][23:16] <= dat_i[7:0];
-	  if(sel_int[1])
-	    atr_ram[adr_i[5:2]][15:8] <= dat_i[15:8];
-	  if(sel_int[0])
-	    atr_ram[adr_i[5:2]][7:0] <= dat_i[7:0];
-       end // if (we_i & stb_i & cyc_i)
-
-   // Removing readback allows ram to be synthesized as LUTs instead of regs
-   //always @(posedge clk_i)
-   //  dat_o <= adr_i[1] ? atr_ram[adr_i[5:2]][31:16] : atr_ram[adr_i[5:2]][15:0];
-   assign dat_o = 16'd0;
-   
-   always @(posedge clk_i)
-     ack_o <= stb_i & cyc_i & ~ack_o;
-
-   // Control side of DP RAM
-   assign     ctrl_lines = atr_ram[state];
-
-   // Put a more complex state machine with time delays and multiple states here
-   //  if daughterboard requires more complex sequencing
-   localparam ATR_IDLE = 4'd0;
-   localparam ATR_TX = 4'd1;
-   localparam ATR_RX = 4'd2;
-   localparam ATR_FULL_DUPLEX = 4'd3;
-   
-   always @(posedge clk_i)
-     if(rst_i)
-       state <= ATR_IDLE;
-     else
-       case ({run_rx,run_tx})
-	 2'b00 : state <= ATR_IDLE;
-	 2'b01 : state <= ATR_TX;
-	 2'b10 : state <= ATR_RX;
-	 2'b11 : state <= ATR_FULL_DUPLEX;
-       endcase // case({run_rx,run_tx})
-   
-endmodule // atr_controller16