aboutsummaryrefslogtreecommitdiffstats
path: root/firmware/zpu
diff options
context:
space:
mode:
Diffstat (limited to 'firmware/zpu')
-rw-r--r--firmware/zpu/apps/txrx_uhd.c2
-rw-r--r--firmware/zpu/lib/pkt_ctrl.c33
-rw-r--r--firmware/zpu/lib/pkt_ctrl.h2
-rw-r--r--firmware/zpu/usrp2/memory_map.h47
-rw-r--r--firmware/zpu/usrp2p/memory_map.h45
5 files changed, 58 insertions, 71 deletions
diff --git a/firmware/zpu/apps/txrx_uhd.c b/firmware/zpu/apps/txrx_uhd.c
index ea74f032e..b16d177d7 100644
--- a/firmware/zpu/apps/txrx_uhd.c
+++ b/firmware/zpu/apps/txrx_uhd.c
@@ -360,7 +360,7 @@ main(void)
//1) register the addresses into the network stack
register_addrs(ethernet_mac_addr(), get_ip_addr());
- pkt_ctrl_program_inspector(get_ip_addr(), USRP2_UDP_CTRL_PORT, USRP2_UDP_DATA_PORT);
+ pkt_ctrl_program_inspector(get_ip_addr(), USRP2_UDP_DATA_PORT);
//2) register callbacks for udp ports we service
init_udp_listeners();
diff --git a/firmware/zpu/lib/pkt_ctrl.c b/firmware/zpu/lib/pkt_ctrl.c
index a5659eb33..ebda35049 100644
--- a/firmware/zpu/lib/pkt_ctrl.c
+++ b/firmware/zpu/lib/pkt_ctrl.c
@@ -20,52 +20,45 @@
#include <nonstdio.h>
void pkt_ctrl_program_inspector(
- const struct ip_addr *ip_addr, uint16_t ctrl_port, uint16_t data_port
+ const struct ip_addr *ip_addr, uint16_t data_port
){
- buffer_pool_ctrl->ip_addr = ip_addr->addr;
- buffer_pool_ctrl->ctrl_ports = ctrl_port;
- buffer_pool_ctrl->data_ports = data_port;
+ router_ctrl->ip_addr = ip_addr->addr;
+ router_ctrl->data_ports = data_port;
}
void pkt_ctrl_set_routing_mode(pkt_ctrl_routing_mode_t mode){
switch(mode){
- case PKT_CTRL_ROUTING_MODE_SLAVE:
- buffer_pool_ctrl->misc_ctrl = 0;
- break;
- case PKT_CTRL_ROUTING_MODE_MASTER:
- buffer_pool_ctrl->misc_ctrl = 1;
- break;
+ case PKT_CTRL_ROUTING_MODE_SLAVE: router_ctrl->mode_ctrl = 0; break;
+ case PKT_CTRL_ROUTING_MODE_MASTER: router_ctrl->mode_ctrl = 1; break;
}
}
static inline bool is_status_bit_set(int bit){
- return buffer_pool_status->status & (1 << bit);
+ return router_status->status & (1 << bit);
}
#define CPU_OUT_HS_BIT 0 //from packet router to CPU
#define CPU_INP_HS_BIT 1 //from CPU to packet router
void *pkt_ctrl_claim_incoming_buffer(size_t *num_lines){
- buffer_pool_ctrl->cpu_out_ctrl = 0;
if (!is_status_bit_set(CPU_OUT_HS_BIT)) return NULL;
- *num_lines = (buffer_pool_status->status >> 16) & 0xffff;
- return buffer_ram(0);
+ *num_lines = (router_status->status >> 16) & 0xffff;
+ return router_ram(0);
}
void pkt_ctrl_release_incoming_buffer(void){
- buffer_pool_ctrl->cpu_out_ctrl = 1;
+ router_ctrl->cpu_out_ctrl = 1;
while (is_status_bit_set(CPU_OUT_HS_BIT)){}
- buffer_pool_ctrl->cpu_out_ctrl = 0;
+ router_ctrl->cpu_out_ctrl = 0;
}
void *pkt_ctrl_claim_outgoing_buffer(void){
- buffer_pool_ctrl->cpu_inp_ctrl = 0;
while (!is_status_bit_set(CPU_INP_HS_BIT)){}
- return buffer_ram(1);
+ return router_ram(1);
}
void pkt_ctrl_commit_outgoing_buffer(size_t num_lines){
- buffer_pool_ctrl->cpu_inp_ctrl = ((num_lines & 0xffff) << 16) | 1;
+ router_ctrl->cpu_inp_ctrl = ((num_lines & 0xffff) << 16) | 1;
while (is_status_bit_set(CPU_INP_HS_BIT)){}
- buffer_pool_ctrl->cpu_inp_ctrl = 0;
+ router_ctrl->cpu_inp_ctrl = 0;
}
diff --git a/firmware/zpu/lib/pkt_ctrl.h b/firmware/zpu/lib/pkt_ctrl.h
index 346e22094..410ffdaa4 100644
--- a/firmware/zpu/lib/pkt_ctrl.h
+++ b/firmware/zpu/lib/pkt_ctrl.h
@@ -30,7 +30,7 @@ typedef enum {
//! Program the decision values into the packet inspector
void pkt_ctrl_program_inspector(
- const struct ip_addr *ip_addr, uint16_t ctrl_port, uint16_t data_port
+ const struct ip_addr *ip_addr, uint16_t data_port
);
//! Set the routing mode for this device
diff --git a/firmware/zpu/usrp2/memory_map.h b/firmware/zpu/usrp2/memory_map.h
index a2de29cdb..ca7453c24 100644
--- a/firmware/zpu/usrp2/memory_map.h
+++ b/firmware/zpu/usrp2/memory_map.h
@@ -18,7 +18,7 @@
/* Overall Memory Map
* 0000-7FFF 32K RAM space (16K on 1500, 24K on 2000, 32K on DSP)
- * 8000-BFFF 16K Buffer Pool
+ * 8000-BFFF 16K Packet Router
* C000-FFFF 16K Peripherals
*/
@@ -45,20 +45,18 @@
#define RAM_BASE 0x0000
////////////////////////////////////////////////////////////////
-// Buffer Pool RAM, Slave 1
+// Packet Router RAM, Slave 1
//
-// The buffers themselves are located in Slave 1, Buffer Pool RAM.
-// The status registers are in Slave 5, Buffer Pool Status.
+// The buffers themselves are located in Slave 1, Packet Router RAM.
+// The status registers are in Slave 5, Packet Router Status.
// The control register is in Slave 7, Settings Bus.
-#define BUFFER_POOL_RAM_BASE 0x8000
+#define ROUTER_RAM_BASE 0x8000
-#define BP_NLINES 0x0200 // number of 32-bit lines in a buffer
+#define RAM_NLINES 0x0200 // number of 32-bit lines in a buffer
-#define buffer_pool_ram \
- ((uint32_t *) BUFFER_POOL_RAM_BASE)
-
-#define buffer_ram(n) (&buffer_pool_ram[(n) * BP_NLINES])
+#define _router_ram ((uint32_t *) ROUTER_RAM_BASE)
+#define router_ram(n) (&_router_ram[(n) * RAM_NLINES])
/////////////////////////////////////////////////////
@@ -162,13 +160,13 @@ typedef struct {
#define gpio_base ((gpio_regs_t *) GPIO_BASE)
///////////////////////////////////////////////////
-// Buffer Pool Status, Slave 5
+// Packet Router Status, Slave 5
//
-// The buffers themselves are located in Slave 1, Buffer Pool RAM.
-// The status registers are in Slave 5, Buffer Pool Status.
+// The buffers themselves are located in Slave 1, Packet Router RAM.
+// The status registers are in Slave 5, Packet Router Status.
// The control register is in Slave 7, Settings Bus.
-#define BUFFER_POOL_STATUS_BASE 0xCC00
+#define ROUTER_STATUS_BASE 0xCC00
typedef struct {
volatile uint32_t _padding[8];
@@ -178,9 +176,9 @@ typedef struct {
volatile uint32_t irqs;
volatile uint32_t pri_enc_bp_status;
volatile uint32_t cycle_count;
-} buffer_pool_status_t;
+} router_status_t;
-#define buffer_pool_status ((buffer_pool_status_t *) BUFFER_POOL_STATUS_BASE)
+#define router_status ((router_status_t *) ROUTER_STATUS_BASE)
// The hw_config register
@@ -193,7 +191,7 @@ typedef struct {
inline static int
hwconfig_simulation_p(void)
{
- return buffer_pool_status->hw_config & HWC_SIMULATION;
+ return router_status->hw_config & HWC_SIMULATION;
}
/*!
@@ -203,7 +201,7 @@ hwconfig_simulation_p(void)
inline static int
hwconfig_wishbone_divisor(void)
{
- return buffer_pool_status->hw_config & HWC_WB_CLK_DIV_MASK;
+ return router_status->hw_config & HWC_WB_CLK_DIV_MASK;
}
///////////////////////////////////////////////////
@@ -225,13 +223,13 @@ hwconfig_wishbone_divisor(void)
#define MISC_OUTPUT_BASE 0xD400
#define TX_PROTOCOL_ENGINE_BASE 0xD480
#define RX_PROTOCOL_ENGINE_BASE 0xD4C0
-#define BUFFER_POOL_CTRL_BASE 0xD500
+#define ROUTER_CTRL_BASE 0xD500
#define LAST_SETTING_REG 0xD7FC // last valid setting register
#define SR_MISC 0
#define SR_TX_PROT_ENG 32
#define SR_RX_PROT_ENG 48
-#define SR_BUFFER_POOL_CTRL 64
+#define SR_ROUTER_CTRL 64
#define SR_UDP_SM 96
#define SR_TX_DSP 208
#define SR_TX_CTRL 224
@@ -243,18 +241,17 @@ hwconfig_wishbone_divisor(void)
#define _SR_ADDR(sr) (MISC_OUTPUT_BASE + (sr) * sizeof(uint32_t))
-// --- buffer pool control regs ---
+// --- packet router control regs ---
typedef struct {
- volatile uint32_t misc_ctrl;
+ volatile uint32_t mode_ctrl;
volatile uint32_t ip_addr;
- volatile uint32_t ctrl_ports; //ctrl (low 16) other (high 16)
volatile uint32_t data_ports; //dsp0 (low 16) dsp1 (high 16)
volatile uint32_t cpu_out_ctrl;
volatile uint32_t cpu_inp_ctrl;
-} buffer_pool_ctrl_t;
+} router_ctrl_t;
-#define buffer_pool_ctrl ((buffer_pool_ctrl_t *) BUFFER_POOL_CTRL_BASE)
+#define router_ctrl ((router_ctrl_t *) ROUTER_CTRL_BASE)
// --- misc outputs ---
diff --git a/firmware/zpu/usrp2p/memory_map.h b/firmware/zpu/usrp2p/memory_map.h
index 6f5c577e6..151c71237 100644
--- a/firmware/zpu/usrp2p/memory_map.h
+++ b/firmware/zpu/usrp2p/memory_map.h
@@ -38,20 +38,18 @@
////////////////////////////////////////////////////////////////
-// Buffer Pool RAM, Slave 1
+// Packet Router RAM, Slave 1
//
-// The buffers themselves are located in Slave 1, Buffer Pool RAM.
-// The status registers are in Slave 5, Buffer Pool Status.
+// The buffers themselves are located in Slave 1, Packet Router RAM.
+// The status registers are in Slave 5, Packet Router Status.
// The control register is in Slave 7, Settings Bus.
-#define BUFFER_POOL_RAM_BASE 0x4000
+#define ROUTER_RAM_BASE 0x4000
-#define BP_NLINES 0x0200 // number of 32-bit lines in a buffer
+#define RAM_NLINES 0x0200 // number of 32-bit lines in a buffer
-#define buffer_pool_ram \
- ((uint32_t *) BUFFER_POOL_RAM_BASE)
-
-#define buffer_ram(n) (&buffer_pool_ram[(n) * BP_NLINES])
+#define _router_ram ((uint32_t *) ROUTER_RAM_BASE)
+#define router_ram(n) (&_router_ram[(n) * RAM_NLINES])
/////////////////////////////////////////////////////
@@ -155,13 +153,13 @@ typedef struct {
#define gpio_base ((gpio_regs_t *) GPIO_BASE)
///////////////////////////////////////////////////
-// Buffer Pool Status, Slave 5
+// Packet Router Status, Slave 5
//
-// The buffers themselves are located in Slave 1, Buffer Pool RAM.
-// The status registers are in Slave 5, Buffer Pool Status.
+// The buffers themselves are located in Slave 1, Packet Router RAM.
+// The status registers are in Slave 5, Packet Router Status.
// The control register is in Slave 7, Settings Bus.
-#define BUFFER_POOL_STATUS_BASE 0x6300
+#define ROUTER_STATUS_BASE 0x6300
typedef struct {
volatile uint32_t _padding[8];
@@ -171,11 +169,11 @@ typedef struct {
volatile uint32_t irqs;
volatile uint32_t pri_enc_bp_status;
volatile uint32_t cycle_count;
-} buffer_pool_status_t;
+} router_status_t;
-#define buffer_pool_status ((buffer_pool_status_t *) BUFFER_POOL_STATUS_BASE)
+#define router_status ((router_status_t *) ROUTER_STATUS_BASE)
-#define BUTTON_PUSHED ((buffer_pool_status->irqs & PIC_BUTTON) ? 0 : 1)
+#define BUTTON_PUSHED ((router_status->irqs & PIC_BUTTON) ? 0 : 1)
// The hw_config register
@@ -188,7 +186,7 @@ typedef struct {
inline static int
hwconfig_simulation_p(void)
{
- return buffer_pool_status->hw_config & HWC_SIMULATION;
+ return router_status->hw_config & HWC_SIMULATION;
}
/*!
@@ -198,7 +196,7 @@ hwconfig_simulation_p(void)
inline static int
hwconfig_wishbone_divisor(void)
{
- return buffer_pool_status->hw_config & HWC_WB_CLK_DIV_MASK;
+ return router_status->hw_config & HWC_WB_CLK_DIV_MASK;
}
///////////////////////////////////////////////////
@@ -222,7 +220,7 @@ hwconfig_wishbone_divisor(void)
#define SR_MISC 0
#define SR_TX_PROT_ENG 32
#define SR_RX_PROT_ENG 48
-#define SR_BUFFER_POOL_CTRL 64
+#define SR_ROUTER_CTRL 64
#define SR_UDP_SM 96
#define SR_TX_DSP 208
#define SR_TX_CTRL 224
@@ -236,18 +234,17 @@ hwconfig_wishbone_divisor(void)
#define SR_ADDR_BLDRDONE _SR_ADDR(5)
-// --- buffer pool control regs ---
+// --- packet router control regs ---
typedef struct {
- volatile uint32_t misc_ctrl;
+ volatile uint32_t mode_ctrl;
volatile uint32_t ip_addr;
- volatile uint32_t ctrl_ports; //ctrl (low 16) other (high 16)
volatile uint32_t data_ports; //dsp0 (low 16) dsp1 (high 16)
volatile uint32_t cpu_out_ctrl;
volatile uint32_t cpu_inp_ctrl;
-} buffer_pool_ctrl_t;
+} router_ctrl_t;
-#define buffer_pool_ctrl ((buffer_pool_ctrl_t *) _SR_ADDR(SR_BUFFER_POOL_CTRL))
+#define router_ctrl ((router_ctrl_t *) _SR_ADDR(SR_ROUTER_CTRL))
// --- misc outputs ---
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 06:03:39 +0000