diff options
Diffstat (limited to 'firmware/zpu/lwip/lwip-1.3.1/src/netif/ethernetif.c')
| -rw-r--r-- | firmware/zpu/lwip/lwip-1.3.1/src/netif/ethernetif.c | 313 |
1 files changed, 0 insertions, 313 deletions
diff --git a/firmware/zpu/lwip/lwip-1.3.1/src/netif/ethernetif.c b/firmware/zpu/lwip/lwip-1.3.1/src/netif/ethernetif.c deleted file mode 100644 index ccd7bd67f..000000000 --- a/firmware/zpu/lwip/lwip-1.3.1/src/netif/ethernetif.c +++ /dev/null @@ -1,313 +0,0 @@ -/** - * @file - * Ethernet Interface Skeleton - * - */ - -/* - * Copyright (c) 2001-2004 Swedish Institute of Computer Science. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT - * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT - * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY - * OF SUCH DAMAGE. - * - * This file is part of the lwIP TCP/IP stack. - * - * Author: Adam Dunkels <adam@sics.se> - * - */ - -/* - * This file is a skeleton for developing Ethernet network interface - * drivers for lwIP. Add code to the low_level functions and do a - * search-and-replace for the word "ethernetif" to replace it with - * something that better describes your network interface. - */ - -#include "lwip/opt.h" - -#if 0 /* don't build, this is only a skeleton, see previous comment */ - -#include "lwip/def.h" -#include "lwip/mem.h" -#include "lwip/pbuf.h" -#include "lwip/sys.h" -#include <lwip/stats.h> -#include <lwip/snmp.h> -#include "netif/etharp.h" -#include "netif/ppp_oe.h" - -/* Define those to better describe your network interface. */ -#define IFNAME0 'e' -#define IFNAME1 'n' - -/** - * Helper struct to hold private data used to operate your ethernet interface. - * Keeping the ethernet address of the MAC in this struct is not necessary - * as it is already kept in the struct netif. - * But this is only an example, anyway... - */ -struct ethernetif { - struct eth_addr *ethaddr; - /* Add whatever per-interface state that is needed here. */ -}; - -/* Forward declarations. */ -static void ethernetif_input(struct netif *netif); - -/** - * In this function, the hardware should be initialized. - * Called from ethernetif_init(). - * - * @param netif the already initialized lwip network interface structure - * for this ethernetif - */ -static void -low_level_init(struct netif *netif) -{ - struct ethernetif *ethernetif = netif->state; - - /* set MAC hardware address length */ - netif->hwaddr_len = ETHARP_HWADDR_LEN; - - /* set MAC hardware address */ - netif->hwaddr[0] = ; - ... - netif->hwaddr[5] = ; - - /* maximum transfer unit */ - netif->mtu = 1500; - - /* device capabilities */ - /* don't set NETIF_FLAG_ETHARP if this device is not an ethernet one */ - netif->flags = NETIF_FLAG_BROADCAST | NETIF_FLAG_ETHARP | NETIF_FLAG_LINK_UP; - - /* Do whatever else is needed to initialize interface. */ -} - -/** - * This function should do the actual transmission of the packet. The packet is - * contained in the pbuf that is passed to the function. This pbuf - * might be chained. - * - * @param netif the lwip network interface structure for this ethernetif - * @param p the MAC packet to send (e.g. IP packet including MAC addresses and type) - * @return ERR_OK if the packet could be sent - * an err_t value if the packet couldn't be sent - * - * @note Returning ERR_MEM here if a DMA queue of your MAC is full can lead to - * strange results. You might consider waiting for space in the DMA queue - * to become availale since the stack doesn't retry to send a packet - * dropped because of memory failure (except for the TCP timers). - */ - -static err_t -low_level_output(struct netif *netif, struct pbuf *p) -{ - struct ethernetif *ethernetif = netif->state; - struct pbuf *q; - - initiate transfer(); - -#if ETH_PAD_SIZE - pbuf_header(p, -ETH_PAD_SIZE); /* drop the padding word */ -#endif - - for(q = p; q != NULL; q = q->next) { - /* Send the data from the pbuf to the interface, one pbuf at a - time. The size of the data in each pbuf is kept in the ->len - variable. */ - send data from(q->payload, q->len); - } - - signal that packet should be sent(); - -#if ETH_PAD_SIZE - pbuf_header(p, ETH_PAD_SIZE); /* reclaim the padding word */ -#endif - - LINK_STATS_INC(link.xmit); - - return ERR_OK; -} - -/** - * Should allocate a pbuf and transfer the bytes of the incoming - * packet from the interface into the pbuf. - * - * @param netif the lwip network interface structure for this ethernetif - * @return a pbuf filled with the received packet (including MAC header) - * NULL on memory error - */ -static struct pbuf * -low_level_input(struct netif *netif) -{ - struct ethernetif *ethernetif = netif->state; - struct pbuf *p, *q; - u16_t len; - - /* Obtain the size of the packet and put it into the "len" - variable. */ - len = ; - -#if ETH_PAD_SIZE - len += ETH_PAD_SIZE; /* allow room for Ethernet padding */ -#endif - - /* We allocate a pbuf chain of pbufs from the pool. */ - p = pbuf_alloc(PBUF_RAW, len, PBUF_POOL); - - if (p != NULL) { - -#if ETH_PAD_SIZE - pbuf_header(p, -ETH_PAD_SIZE); /* drop the padding word */ -#endif - - /* We iterate over the pbuf chain until we have read the entire - * packet into the pbuf. */ - for(q = p; q != NULL; q = q->next) { - /* Read enough bytes to fill this pbuf in the chain. The - * available data in the pbuf is given by the q->len - * variable. */ - read data into(q->payload, q->len); - } - acknowledge that packet has been read(); - -#if ETH_PAD_SIZE - pbuf_header(p, ETH_PAD_SIZE); /* reclaim the padding word */ -#endif - - LINK_STATS_INC(link.recv); - } else { - drop packet(); - LINK_STATS_INC(link.memerr); - LINK_STATS_INC(link.drop); - } - - return p; -} - -/** - * This function should be called when a packet is ready to be read - * from the interface. It uses the function low_level_input() that - * should handle the actual reception of bytes from the network - * interface. Then the type of the received packet is determined and - * the appropriate input function is called. - * - * @param netif the lwip network interface structure for this ethernetif - */ -static void -ethernetif_input(struct netif *netif) -{ - struct ethernetif *ethernetif; - struct eth_hdr *ethhdr; - struct pbuf *p; - - ethernetif = netif->state; - - /* move received packet into a new pbuf */ - p = low_level_input(netif); - /* no packet could be read, silently ignore this */ - if (p == NULL) return; - /* points to packet payload, which starts with an Ethernet header */ - ethhdr = p->payload; - - switch (htons(ethhdr->type)) { - /* IP or ARP packet? */ - case ETHTYPE_IP: - case ETHTYPE_ARP: -#if PPPOE_SUPPORT - /* PPPoE packet? */ - case ETHTYPE_PPPOEDISC: - case ETHTYPE_PPPOE: -#endif /* PPPOE_SUPPORT */ - /* full packet send to tcpip_thread to process */ - if (netif->input(p, netif)!=ERR_OK) - { LWIP_DEBUGF(NETIF_DEBUG, ("ethernetif_input: IP input error\n")); - pbuf_free(p); - p = NULL; - } - break; - - default: - pbuf_free(p); - p = NULL; - break; - } -} - -/** - * Should be called at the beginning of the program to set up the - * network interface. It calls the function low_level_init() to do the - * actual setup of the hardware. - * - * This function should be passed as a parameter to netif_add(). - * - * @param netif the lwip network interface structure for this ethernetif - * @return ERR_OK if the loopif is initialized - * ERR_MEM if private data couldn't be allocated - * any other err_t on error - */ -err_t -ethernetif_init(struct netif *netif) -{ - struct ethernetif *ethernetif; - - LWIP_ASSERT("netif != NULL", (netif != NULL)); - - ethernetif = mem_malloc(sizeof(struct ethernetif)); - if (ethernetif == NULL) { - LWIP_DEBUGF(NETIF_DEBUG, ("ethernetif_init: out of memory\n")); - return ERR_MEM; - } - -#if LWIP_NETIF_HOSTNAME - /* Initialize interface hostname */ - netif->hostname = "lwip"; -#endif /* LWIP_NETIF_HOSTNAME */ - - /* - * Initialize the snmp variables and counters inside the struct netif. - * The last argument should be replaced with your link speed, in units - * of bits per second. - */ - NETIF_INIT_SNMP(netif, snmp_ifType_ethernet_csmacd, LINK_SPEED_OF_YOUR_NETIF_IN_BPS); - - netif->state = ethernetif; - netif->name[0] = IFNAME0; - netif->name[1] = IFNAME1; - /* We directly use etharp_output() here to save a function call. - * You can instead declare your own function an call etharp_output() - * from it if you have to do some checks before sending (e.g. if link - * is available...) */ - netif->output = etharp_output; - netif->linkoutput = low_level_output; - - ethernetif->ethaddr = (struct eth_addr *)&(netif->hwaddr[0]); - - /* initialize the hardware */ - low_level_init(netif); - - return ERR_OK; -} - -#endif /* 0 */ |