2 files changed, 6 insertions, 6 deletions
diff --git a/firmware/microblaze/usrp2p/bootloader/Makefile.am b/firmware/microblaze/usrp2p/bootloader/Makefile.am
index eb72d937d..1fc5daf9c 100644
--- a/firmware/microblaze/usrp2p/bootloader/Makefile.am
+++ b/firmware/microblaze/usrp2p/bootloader/Makefile.am
@@ -30,7 +30,7 @@ LDADD = $(top_srcdir)/usrp2p/libusrp2p.a
 noinst_PROGRAMS = \
 	init_bootloader.elf
 
-init_bootloader_elf_SOURCES = init_bootloader.c i2c_sync.c
+init_bootloader_elf_SOURCES = init_bootloader.c
 
 .bin.rmi:
 	$(top_srcdir)/bin/bin_to_ram_macro_init.py $< $@
diff --git a/firmware/microblaze/usrp2p/bootloader/init_bootloader.c b/firmware/microblaze/usrp2p/bootloader/init_bootloader.c
index 3571313ff..e6c808f37 100644
--- a/firmware/microblaze/usrp2p/bootloader/init_bootloader.c
+++ b/firmware/microblaze/usrp2p/bootloader/init_bootloader.c
@@ -15,7 +15,8 @@
 #include <bootloader_utils.h>
 #include <string.h>
 #include <hal_uart.h>
-#include "i2c_sync.h"
+#include <i2c.h>
+#include "usrp2/fw_common.h"
 
 #define SAFE_FLAG_LOCATION 247
 
@@ -31,14 +32,13 @@ void pic_interrupt_handler()
 
 bool find_safe_booted_flag(void) {
 	unsigned char flag_byte;
-	i2c_read(SAFE_FLAG_LOCATION, &flag_byte, 1);
-	
+	eeprom_read(USRP2_I2C_ADDR_MBOARD, SAFE_FLAG_LOCATION, &flag_byte, 1);
 	return (flag_byte == 0x5E);
 }
 
 void set_safe_booted_flag(bool flag) {
 	unsigned char flag_byte = flag ? 0x5E : 0xDC;
-	i2c_write(SAFE_FLAG_LOCATION, &flag_byte, 1);
+	eeprom_write(USRP2_I2C_ADDR_MBOARD, SAFE_FLAG_LOCATION, &flag_byte, 1);
 }
 
 
@@ -102,7 +102,7 @@ int main(int argc, char *argv[]) {
 		if(is_valid_fpga_image(PROD_FPGA_IMAGE_LOCATION_ADDR)) {
 			puts("Valid production FPGA image found. Attempting to boot.");
 			set_safe_booted_flag(1);
-			delay(10000);
+			delay(30000); //so serial output can finish
 			icap_reload_fpga(PROD_FPGA_IMAGE_LOCATION_ADDR);
 		}
 		puts("No valid production FPGA image found.\nAttempting to load production firmware...");