1 files changed, 0 insertions, 106 deletions
diff --git a/firmware/microblaze/apps/burn_dbsrx_eeprom.c b/firmware/microblaze/apps/burn_dbsrx_eeprom.c
deleted file mode 100644
index 116d4d8d0..000000000
--- a/firmware/microblaze/apps/burn_dbsrx_eeprom.c
+++ /dev/null
@@ -1,106 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2009 Free Software Foundation, Inc.
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifdef HAVE_CONFIG_H
-#include "config.h"
-#endif
-
-#include "u2_init.h"
-#include "i2c.h"
-#include "usrp2_i2c_addr.h"
-#include "mdelay.h"
-#include "hal_io.h"
-#include "nonstdio.h"
-#include <stdbool.h>
-
-
-
-int read_dboard_eeprom(int i2c_addr);
-
-
-#define USRP_DBID_DBS_RX          	 0x0002
-#define USRP_DBID_DBS_RX_WITH_CLOCK_MOD  0x000d
-
-const char dbs_rx_rev2_eeprom[] = {
-  0xdb, 0x0d, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18
-};
-
-#define	LED_VALS   (LED_A | LED_B | LED_C | LED_D)
-#define	LED_MASK   (LED_A | LED_B | LED_C | LED_D)
-
-int
-main(void)
-{
-  u2_init();
-
-  puts("\nburn_dbsrx_eeprom\n");
-
-  hal_set_leds(0, ~0);	// all off
-
-  int i2c_addr = I2C_ADDR_RX_A;
-  int dbid = read_dboard_eeprom(i2c_addr);
-  bool ok;
-  const char *msg = 0;
-
-  switch (dbid){
-  case -1:
-    msg = "No RX daughterboard found";
-    goto bad;
-
-  case -2:
-    msg = "Invalid RX EEPROM contents";
-    goto bad;
-
-  case USRP_DBID_DBS_RX_WITH_CLOCK_MOD:
-    msg = "RX Daughterboard already reports being a DBS RX w/ CLOCK_MOD";
-    goto good;
-
-  case USRP_DBID_DBS_RX:
-    // Says it's a DBS_RX, attempt to burn the EEPROM
-    ok = eeprom_write(i2c_addr, 0,
-		      dbs_rx_rev2_eeprom, sizeof(dbs_rx_rev2_eeprom));
-    if (ok){
-      msg = "Successfully programmed db as DBS RX Rev 2.1";
-      goto good;
-    }
-    else {
-      msg = "Failed to write daugherboard eeprom";
-      goto bad;
-    }
-
-  default:
-    msg = "Daughterboard is not a DBS RX; ignored";
-    goto bad;
-  }
-  
- good:
-  puts(msg);
-  hal_set_leds(LED_VALS, LED_MASK);
-  while (1)
-    ;
-
- bad:
-  puts(msg);
-  while(1){
-    hal_toggle_leds(LED_VALS);
-    mdelay(50);
-  }
-}