1 files changed, 183 insertions, 0 deletions
diff --git a/firmware/fx2/b100/fpga_load.c b/firmware/fx2/b100/fpga_load.c
new file mode 100644
index 000000000..394c9f50e
--- /dev/null
+++ b/firmware/fx2/b100/fpga_load.c
@@ -0,0 +1,183 @@
+/* 
+ * USRP - Universal Software Radio Peripheral
+ *
+ * Copyright (C) 2003 Free Software Foundation, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
+ */
+
+#include "usrp_common.h"
+#include "fpga_load.h"
+#include "delay.h"
+
+/*
+ * setup altera FPGA serial load (PS).
+ *
+ * On entry:
+ *	don't care
+ *
+ * On exit:
+ *	ALTERA_DCLK    = 0
+ *	ALTERA_NCONFIG = 1
+ *	ALTERA_NSTATUS = 1 (input)
+ */
+unsigned char
+fpga_load_begin (void)
+{
+  USRP_ALTERA_CONFIG &= ~bmALTERA_BITS;		// clear all bits (NCONFIG low)
+  udelay (40);					// wait 40 us
+  USRP_ALTERA_CONFIG |= bmALTERA_NCONFIG;	// set NCONFIG high
+
+  // ready to xfer now
+
+  return 1;
+}
+
+/*
+ * clock out the low bit of bits.
+ *
+ * On entry:
+ *	ALTERA_DCLK    = 0
+ *	ALTERA_NCONFIG = 1
+ *	ALTERA_NSTATUS = 1 (input)
+ *
+ * On exit:
+ *	ALTERA_DCLK    = 0
+ *	ALTERA_NCONFIG = 1
+ *	ALTERA_NSTATUS = 1 (input)
+ */
+
+
+#if 0
+
+static void
+clock_out_config_byte (unsigned char bits)
+{
+  unsigned char i;
+
+  // clock out configuration byte, least significant bit first
+
+  for (i = 0; i < 8; i++){
+
+    bitALTERA_DATA0 = bits & 1;
+    bitALTERA_DCLK = 1;		/* set DCLK to 1 */
+    bitALTERA_DCLK = 0;		/* set DCLK to 0 */
+
+    bits = bits >> 1;
+  }
+}
+	
+#else
+
+static void 
+clock_out_config_byte (unsigned char bits) _naked
+{
+    _asm
+	mov	a, dpl
+	
+	rlc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	rlc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	rlc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	rlc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	rlc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	rlc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	rlc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	rlc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	ret	
+
+    _endasm;
+}
+
+#endif
+
+static void
+clock_out_bytes (unsigned char bytecount,
+		 unsigned char xdata *p)
+{
+  while (bytecount-- > 0)
+    clock_out_config_byte (*p++);
+}
+
+/*
+ * Transfer block of bytes from packet to FPGA serial configuration port
+ *
+ * On entry:
+ *	ALTERA_DCLK    = 0
+ *	ALTERA_NCONFIG = 1
+ *	ALTERA_NSTATUS = 1 (input)
+ *
+ * On exit:
+ *	ALTERA_DCLK    = 0
+ *	ALTERA_NCONFIG = 1
+ *	ALTERA_NSTATUS = 1 (input)
+ */
+unsigned char
+fpga_load_xfer (xdata unsigned char *p, unsigned char bytecount)
+{
+  clock_out_bytes (bytecount, p);
+  return 1;
+}
+
+/*
+ * check for successful load...
+ */
+unsigned char
+fpga_load_end (void)
+{
+  unsigned char status = USRP_ALTERA_CONFIG;
+
+  if (!UC_BOARD_HAS_FPGA)			// always true if we don't have FPGA
+    return 1;
+
+  if (bitALTERA_CONF_DONE)
+    return 1;					// everything's cool
+
+  // I don't think this should happen.  It indicates that
+  // programming is still in progress.
+
+  return 0;
+}