dsp: add resets for simulation purposes

1 files changed, 4 insertions, 4 deletions

diff --git a/usrp2/sdr_lib/dsp_core_rx.v b/usrp2/sdr_lib/dsp_core_rx.v
index cd3e7cc22..ca1e0d5b4 100644
--- a/usrp2/sdr_lib/dsp_core_rx.v
+++ b/usrp2/sdr_lib/dsp_core_rx.v
@@ -124,10 +124,10 @@ module dsp_core_rx
 
    wire        strobe_cic_d1;
    round_sd #(.WIDTH_IN(24),.WIDTH_OUT(18)) round_icic
-     (.clk(clk),. in(i_cic), .strobe_in(strobe_cic), .out(i_cic_scaled), .strobe_out(strobe_cic_d1));
+     (.clk(clk),.reset(rst), .in(i_cic), .strobe_in(strobe_cic), .out(i_cic_scaled), .strobe_out(strobe_cic_d1));
    
    round_sd #(.WIDTH_IN(24),.WIDTH_OUT(18)) round_qcic
-     (.clk(clk), .in(q_cic), .strobe_in(strobe_cic), .out(q_cic_scaled), .strobe_out());
+     (.clk(clk),.reset(rst), .in(q_cic), .strobe_in(strobe_cic), .out(q_cic_scaled), .strobe_out());
    
    small_hb_dec #(.WIDTH(18)) small_hb_i
      (.clk(clk),.rst(rst),.bypass(~enable_hb1),.run(run),
@@ -147,10 +147,10 @@ module dsp_core_rx
       .stb_in(strobe_hb1),.data_in(q_hb1),.stb_out(),.data_out(q_hb2));
 
    round_sd #(.WIDTH_IN(18),.WIDTH_OUT(16)) round_iout
-     (.clk(clk), .in(i_hb2), .strobe_in(strobe_hb2), .out(i_out), .strobe_out(strobe));
+     (.clk(clk), .reset(rst), .in(i_hb2), .strobe_in(strobe_hb2), .out(i_out), .strobe_out(strobe));
    
    round_sd #(.WIDTH_IN(18),.WIDTH_OUT(16)) round_qout
-     (.clk(clk), .in(q_hb2), .strobe_in(strobe_hb2), .out(q_out), .strobe_out());
+     (.clk(clk), .reset(rst), .in(q_hb2), .strobe_in(strobe_hb2), .out(q_out), .strobe_out());
    
    assign      sample = {i_out,q_out};
    assign      debug = {enable_hb1, enable_hb2, run, strobe, strobe_cic, strobe_cic_d1, strobe_hb1, strobe_hb2};