Merge branch 'b100_shrink' into new_work

9 files changed, 306 insertions, 257 deletions

diff --git a/usrp2/top/B100/u1plus_core.v b/usrp2/top/B100/u1plus_core.v
index 8a02f0fb8..3c861fe08 100644
--- a/usrp2/top/B100/u1plus_core.v
+++ b/usrp2/top/B100/u1plus_core.v
@@ -30,7 +30,6 @@ module u1plus_core
    output sclk, output [15:0] sen, output mosi, input miso,
 
    input cgen_st_status, input cgen_st_ld, input cgen_st_refmon, output cgen_sync_b, output cgen_ref_sel,   
-   output tx_underrun, output rx_overrun,
    inout [15:0] io_tx, inout [15:0] io_rx, 
    output [13:0] tx_i, output [13:0] tx_q, 
    input [11:0] rx_i, input [11:0] rx_q, 
@@ -41,24 +40,31 @@ module u1plus_core
    localparam RXFIFOSIZE = 11;
 
    // 64 total regs in address space
-   localparam SR_RX_CTRL = 0;     // 9 regs (+0 to +8)
-   localparam SR_RX_DSP = 16;     // 7 regs (+0 to +6)
-   localparam SR_TX_CTRL = 24;    // 6 regs (+0 to +5)
-   localparam SR_TX_DSP = 32;     // 5 regs (+0 to +4)
-   localparam SR_TIME64 = 40;     // 6 regs (+0 to +5)
-   localparam SR_CLEAR_RX_FIFO = 48; // 1 reg
-   localparam SR_CLEAR_TX_FIFO = 49; // 1 reg
-   localparam SR_GLOBAL_RESET = 50; // 1 reg
-   localparam SR_REG_TEST32 = 52; // 1 reg
-
-   wire [7:0]	COMPAT_NUM = 8'd3;
+   localparam SR_RX_CTRL0 = 0;       // 9 regs (+0 to +8)
+   localparam SR_RX_DSP0 = 10;       // 4 regs (+0 to +3)
+   localparam SR_RX_CTRL1 = 16;      // 9 regs (+0 to +8)
+   localparam SR_RX_DSP1 = 26;       // 4 regs (+0 to +3)
+   localparam SR_TX_CTRL = 32;       // 4 regs (+0 to +3)
+   localparam SR_TX_DSP = 38;        // 3 regs (+0 to +2)
+
+   localparam SR_TIME64 = 42;        // 6 regs (+0 to +5)
+   localparam SR_RX_FRONT = 48;      // 5 regs (+0 to +4)
+   localparam SR_TX_FRONT = 54;      // 5 regs (+0 to +4)
+
+   localparam SR_REG_TEST32 = 60;    // 1 reg
+   localparam SR_CLEAR_RX_FIFO = 61; // 1 reg
+   localparam SR_CLEAR_TX_FIFO = 62; // 1 reg
+   localparam SR_GLOBAL_RESET = 63;  // 1 reg
+
+   wire [7:0]	COMPAT_NUM = 8'd5;
    
    wire 	wb_clk = clk_fpga;
    wire 	wb_rst, global_reset;
 
    wire 	pps_int;
    wire [63:0] 	vita_time, vita_time_pps;
-   reg [15:0] 	reg_leds, reg_cgen_ctrl, reg_test, xfer_rate;
+   reg [15:0] 	reg_leds, reg_cgen_ctrl, reg_test;
+   wire [15:0] 	xfer_rate = 0;
    wire [7:0] 	test_rate;
    wire [3:0] 	test_ctrl;
    
@@ -72,11 +78,11 @@ module u1plus_core
    wire [31:0] 	debug_vt;
    wire 	gpif_rst;
    
-   wire 	rx_overrun_dsp, rx_overrun_gpmc, tx_underrun_dsp, tx_underrun_gpmc;
    reg [7:0] 	frames_per_packet;
    
-   assign rx_overrun = rx_overrun_gpmc | rx_overrun_dsp;
-   assign tx_underrun = tx_underrun_gpmc | tx_underrun_dsp;
+   wire 	rx_overrun_dsp0, rx_overrun_dsp1, rx_overrun_gpif, tx_underrun_dsp, tx_underrun_gpif;
+   wire 	rx_overrun = rx_overrun_gpif | rx_overrun_dsp0 | rx_overrun_dsp1;
+   wire 	tx_underrun = tx_underrun_gpif | tx_underrun_dsp;
    
    setting_reg #(.my_addr(SR_GLOBAL_RESET), .width(1)) sr_reset
      (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr),
@@ -97,13 +103,12 @@ module u1plus_core
    wire [sw-1:0] m0_sel;
    wire 	 m0_cyc, m0_stb, m0_we, m0_ack, m0_err, m0_rty;
 
-   wire [31:0] 	 debug_gpmc;
+   wire [31:0] 	 debug_gpif;
 
    wire [35:0] 	 tx_data, rx_data, tx_err_data;
    wire 	 tx_src_rdy, tx_dst_rdy, rx_src_rdy, rx_dst_rdy, 
 		 tx_err_src_rdy, tx_err_dst_rdy;
 
-   wire 	 bus_error;
    wire 	 clear_tx, clear_rx;
    
    setting_reg #(.my_addr(SR_CLEAR_RX_FIFO), .width(1)) sr_clear_rx
@@ -128,36 +133,83 @@ module u1plus_core
 	 .rx_data_i(rx_data), .rx_src_rdy_i(rx_src_rdy), .rx_dst_rdy_o(rx_dst_rdy),
 	 .tx_err_data_i(tx_err_data), .tx_err_src_rdy_i(tx_err_src_rdy), .tx_err_dst_rdy_o(tx_err_dst_rdy),
 	 
-	 .tx_underrun(tx_underrun_gpmc), .rx_overrun(rx_overrun_gpmc),
+	 .tx_underrun(tx_underrun_gpif), .rx_overrun(rx_overrun_gpif),
 
 	 .frames_per_packet(frames_per_packet), .test_len(test_len), .test_rate(test_rate), .test_ctrl(test_ctrl),
 	 .debug0(debug0), .debug1(debug1));
 
    // /////////////////////////////////////////////////////////////////////////
-   // DSP RX
-   wire [31:0] 	 sample_rx;
-   wire 	 strobe_rx, run_rx;
-   wire [31:0] 	 debug_rx_dsp, vr_debug;
+   // RX ADC Frontend, does IQ Balance, DC Offset, muxing
+
+   wire [23:0] 	 adc_i, adc_q;  // 24 bits is total overkill here, but it matches u2/u2p
+   wire 	 run_rx, run_rx0, run_rx1;
+   
+   rx_frontend #(.BASE(SR_RX_FRONT)) rx_frontend
+     (.clk(wb_clk),.rst(wb_rst),
+      .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
+      .adc_a({rx_i,4'b00}),.adc_ovf_a(0),
+      .adc_b({rx_q,4'b00}),.adc_ovf_b(0),
+      .i_out(adc_i), .q_out(adc_q), .run(run_rx0 | run_rx1), .debug());
+   
+   // /////////////////////////////////////////////////////////////////////////
+   // DSP RX 0
+
+   wire [31:0] 	 sample_rx0;
+   wire 	 strobe_rx0;
+   wire [35:0] 	 vita_rx_data0;
+   wire 	 vita_rx_src_rdy0, vita_rx_dst_rdy0;
    
-   dsp_core_rx #(.BASE(SR_RX_DSP)) dsp_core_rx
+   dsp_core_rx #(.BASE(SR_RX_DSP0)) dsp_core_rx0
      (.clk(wb_clk),.rst(wb_rst),
       .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
-      .adc_a({rx_i,2'b0}),.adc_ovf_a(0),.adc_b({rx_q,2'b0}),.adc_ovf_b(0),
-      .sample(sample_rx), .run(run_rx), .strobe(strobe_rx),
-      .debug(debug_rx_dsp) );
+      .adc_i(adc_i),.adc_ovf_i(0),.adc_q(adc_q),.adc_ovf_q(0),
+      .sample(sample_rx0), .run(run_rx0), .strobe(strobe_rx0),
+      .debug() );
+
+   vita_rx_chain #(.BASE(SR_RX_CTRL0), .UNIT(0), .FIFOSIZE(9), .PROT_ENG_FLAGS(0)) vita_rx_chain0
+     (.clk(wb_clk),.reset(wb_rst),.clear(clear_rx),
+      .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
+      .vita_time(vita_time), .overrun(rx_overrun_dsp0),
+      .sample(sample_rx0), .run(run_rx0), .strobe(strobe_rx0),
+      .rx_data_o(vita_rx_data0), .rx_dst_rdy_i(vita_rx_dst_rdy0), .rx_src_rdy_o(vita_rx_src_rdy0),
+      .debug() );
    
-   vita_rx_chain #(.BASE(SR_RX_CTRL), .UNIT(0), .FIFOSIZE(9), .PROT_ENG_FLAGS(0)) vita_rx_chain
+   // /////////////////////////////////////////////////////////////////////////
+   // DSP RX 1
+
+   wire [31:0] 	 sample_rx1;
+   wire 	 strobe_rx1;
+   wire [35:0] 	 vita_rx_data1;
+   wire 	 vita_rx_src_rdy1, vita_rx_dst_rdy1;
+   
+   dsp_core_rx #(.BASE(SR_RX_DSP1)) dsp_core_rx1
+     (.clk(wb_clk),.rst(wb_rst),
+      .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
+      .adc_i(adc_i),.adc_ovf_i(0),.adc_q(adc_q),.adc_ovf_q(0),
+      .sample(sample_rx1), .run(run_rx1), .strobe(strobe_rx1),
+      .debug() );
+
+   vita_rx_chain #(.BASE(SR_RX_CTRL1), .UNIT(1), .FIFOSIZE(9), .PROT_ENG_FLAGS(0)) vita_rx_chain1
      (.clk(wb_clk),.reset(wb_rst),.clear(clear_rx),
       .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
-      .vita_time(vita_time), .overrun(rx_overrun_dsp),
-      .sample(sample_rx), .run(run_rx), .strobe(strobe_rx),
-      .rx_data_o(rx_data), .rx_dst_rdy_i(rx_dst_rdy), .rx_src_rdy_o(rx_src_rdy),
-      .debug(vr_debug) );
+      .vita_time(vita_time), .overrun(rx_overrun_dsp1),
+      .sample(sample_rx1), .run(run_rx1), .strobe(strobe_rx1),
+      .rx_data_o(vita_rx_data1), .rx_dst_rdy_i(vita_rx_dst_rdy1), .rx_src_rdy_o(vita_rx_src_rdy1),
+      .debug() );
+
+   // /////////////////////////////////////////////////////////////////////////
+   // RX Stream muxing
+
+   fifo36_mux #(.prio(0)) mux_data_streams
+     (.clk(wb_clk), .reset(wb_rst), .clear(0),
+      .data0_i(vita_rx_data0), .src0_rdy_i(vita_rx_src_rdy0), .dst0_rdy_o(vita_rx_dst_rdy0),
+      .data1_i(vita_rx_data1), .src1_rdy_i(vita_rx_src_rdy1), .dst1_rdy_o(vita_rx_dst_rdy1),
+      .data_o(rx_data), .src_rdy_o(rx_src_rdy), .dst_rdy_i(rx_dst_rdy));
    
    // ///////////////////////////////////////////////////////////////////////////////////
    // DSP TX
 
-   wire [15:0] 	 tx_i_int, tx_q_int;
+   wire [23:0] 	 tx_i_int, tx_q_int;
    wire 	 run_tx;
    
    vita_tx_chain #(.BASE_CTRL(SR_TX_CTRL), .BASE_DSP(SR_TX_DSP), 
@@ -170,13 +222,16 @@ module u1plus_core
       .vita_time(vita_time),
       .tx_data_i(tx_data), .tx_src_rdy_i(tx_src_rdy), .tx_dst_rdy_o(tx_dst_rdy),
       .err_data_o(tx_err_data), .err_src_rdy_o(tx_err_src_rdy), .err_dst_rdy_i(tx_err_dst_rdy),
-      .dac_a(tx_i_int),.dac_b(tx_q_int),
+      .tx_i(tx_i_int),.tx_q(tx_q_int),
       .underrun(tx_underrun_dsp), .run(run_tx),
       .debug(debug_vt));
-   
-   assign tx_i = tx_i_int[15:2];
-   assign tx_q = tx_q_int[15:2];
-   
+
+   tx_frontend #(.BASE(SR_TX_FRONT), .WIDTH_OUT(14)) tx_frontend
+     (.clk(wb_clk), .rst(wb_rst),
+      .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
+      .tx_i(tx_i_int), .tx_q(tx_q_int), .run(1'b1),
+      .dac_a(tx_i), .dac_b(tx_q));
+
    // /////////////////////////////////////////////////////////////////////////////////////
    // Wishbone Intercon, single master
    wire [dw-1:0] s0_dat_mosi, s1_dat_mosi, s0_dat_miso, s1_dat_miso, s2_dat_mosi, s3_dat_mosi, s2_dat_miso, s3_dat_miso,
@@ -277,8 +332,8 @@ module u1plus_core
 	     reg_test <= s0_dat_mosi;
 	   REG_RX_FRAMELEN :
 	     frames_per_packet <= s0_dat_mosi[7:0];
-	   REG_XFER_RATE :
-	     xfer_rate <= s0_dat_mosi;
+	   //REG_XFER_RATE :
+	     //xfer_rate <= s0_dat_mosi;
 	 endcase // case (s0_adr[6:0])
 
    assign test_ctrl = xfer_rate[11:8];
@@ -300,14 +355,16 @@ module u1plus_core
    // /////////////////////////////////////////////////////////////////////////////////////
    // Slave 1, UART
    //    depth of 3 is 128 entries, clkdiv of 278 gives 230.4k with a 64 MHz system clock
-   
+
+/*   
    simple_uart #(.TXDEPTH(3),.RXDEPTH(3), .CLKDIV_DEFAULT(278)) uart 
      (.clk_i(wb_clk),.rst_i(wb_rst),
       .we_i(s1_we),.stb_i(s1_stb),.cyc_i(s1_cyc),.ack_o(s1_ack),
       .adr_i(s1_adr[3:1]),.dat_i({16'd0,s1_dat_mosi}),.dat_o(s1_dat_miso),
       .rx_int_o(),.tx_int_o(),
       .tx_o(debug_txd),.rx_i(debug_rxd),.baud_o());
-
+*/
+   
    // /////////////////////////////////////////////////////////////////////////////////////
    // Slave 2, SPI
 
@@ -401,9 +458,8 @@ module u1plus_core
    // Debug circuitry
 
    assign debug_clk = { gpif_clk, clk_fpga };
-   assign debug = debug0;
+   assign debug = 0;
    assign debug_gpio_0 = 0;
    assign debug_gpio_1 = 0;
-   //assign {io_tx,io_rx} = {debug1};
    
 endmodule // u1plus_core
diff --git a/usrp2/top/E1x0/Makefile.passthru b/usrp2/top/E1x0/Makefile.passthru
deleted file mode 100644
index f2d835608..000000000
--- a/usrp2/top/E1x0/Makefile.passthru
+++ /dev/null
@@ -1,98 +0,0 @@
-#
-# Copyright 2008 Ettus Research LLC
-#
-
-##################################################
-# Project Setup
-##################################################
-TOP_MODULE = passthru
-BUILD_DIR = $(abspath build$(ISE))
-
-##################################################
-# Include other makefiles
-##################################################
-
-include ../Makefile.common
-include ../../fifo/Makefile.srcs
-include ../../control_lib/Makefile.srcs
-include ../../sdr_lib/Makefile.srcs
-include ../../serdes/Makefile.srcs
-include ../../simple_gemac/Makefile.srcs
-include ../../timing/Makefile.srcs
-include ../../opencores/Makefile.srcs
-include ../../vrt/Makefile.srcs
-include ../../udp/Makefile.srcs
-include ../../coregen/Makefile.srcs
-include ../../gpmc/Makefile.srcs
-
-##################################################
-# Project Properties
-##################################################
-export PROJECT_PROPERTIES := \
-family "Spartan-3A DSP" \
-device xc3sd1800a \
-package cs484 \
-speed -4 \
-top_level_module_type "HDL" \
-synthesis_tool "XST (VHDL/Verilog)" \
-simulator "ISE Simulator (VHDL/Verilog)" \
-"Preferred Language" "Verilog" \
-"Enable Message Filtering" FALSE \
-"Display Incremental Messages" FALSE 
-
-##################################################
-# Sources
-##################################################
-TOP_SRCS = \
-passthru.v \
-passthru.ucf
-
-SOURCES = $(abspath $(TOP_SRCS)) $(FIFO_SRCS) \
-$(CONTROL_LIB_SRCS) $(SDR_LIB_SRCS) $(SERDES_SRCS) \
-$(SIMPLE_GEMAC_SRCS) $(TIMING_SRCS) $(OPENCORES_SRCS) \
-$(VRT_SRCS) $(UDP_SRCS) $(COREGEN_SRCS) \
-$(GPMC_SRCS)
-
-##################################################
-# Process Properties
-##################################################
-SYNTHESIZE_PROPERTIES = \
-"Number of Clock Buffers" 8 \
-"Pack I/O Registers into IOBs" Yes \
-"Optimization Effort" High \
-"Optimize Instantiated Primitives" TRUE \
-"Register Balancing" Yes \
-"Use Clock Enable" Auto \
-"Use Synchronous Reset" Auto \
-"Use Synchronous Set" Auto
-
-TRANSLATE_PROPERTIES = \
-"Macro Search Path" "$(shell pwd)/../../coregen/"
-
-MAP_PROPERTIES = \
-"Allow Logic Optimization Across Hierarchy" TRUE \
-"Map to Input Functions" 4 \
-"Optimization Strategy (Cover Mode)" Speed \
-"Pack I/O Registers/Latches into IOBs" "For Inputs and Outputs" \
-"Perform Timing-Driven Packing and Placement" TRUE \
-"Map Effort Level" High \
-"Extra Effort" Normal \
-"Combinatorial Logic Optimization" TRUE \
-"Register Duplication" TRUE
-
-PLACE_ROUTE_PROPERTIES = \
-"Place & Route Effort Level (Overall)" High 
-
-STATIC_TIMING_PROPERTIES = \
-"Number of Paths in Error/Verbose Report" 10 \
-"Report Type" "Error Report"
-
-GEN_PROG_FILE_PROPERTIES = \
-"Configuration Rate" 6 \
-"Create Binary Configuration File" TRUE \
-"Done (Output Events)" 5 \
-"Enable Bitstream Compression" TRUE \
-"Enable Outputs (Output Events)" 6 \
-"Unused IOB Pins" "Pull Up"
-
-SIM_MODEL_PROPERTIES = ""
diff --git a/usrp2/top/E1x0/core_compile b/usrp2/top/E1x0/core_compile
index dc0cd081e..02d7f006e 100755
--- a/usrp2/top/E1x0/core_compile
+++ b/usrp2/top/E1x0/core_compile
@@ -1,3 +1,3 @@
-iverilog -Wall -y. -y ../../control_lib/ -y ../../fifo/ -y ../../gpmc/ -y ../../models/ -y ../../sdr_lib/ -y ../../coregen/ -y ../../vrt/ -y ../../opencores/i2c/rtl/verilog/ -y ../../opencores/spi/rtl/verilog/ -y ../../timing/ -y ../../opencores/8b10b/ -I ../../opencores/spi/rtl/verilog/ -I ../../opencores/i2c/rtl/verilog/ -y ../../simple_gemac u1e_core.v  2>&1  | grep -v timescale | grep -v coregen | grep -v models
+iverilog -Wall -y. -y ../../control_lib/ -y ../../fifo/ -y ../../gpmc/ -y ../../models/ -y ../../sdr_lib/ -y ../../coregen/ -y ../../vrt/ -y ../../opencores/i2c/rtl/verilog/ -y ../../opencores/spi/rtl/verilog/ -y ../../timing/ -y ../../opencores/8b10b/ -I ../../opencores/spi/rtl/verilog/ -I ../../opencores/i2c/rtl/verilog/ -y ../../simple_gemac -y $XILINX/verilog/src/unisims u1e_core.v  2>&1  | grep -v timescale | grep -v coregen | grep -v models
 
 
diff --git a/usrp2/top/E1x0/passthru.ucf b/usrp2/top/E1x0/passthru.ucf
deleted file mode 100644
index 64e6f0440..000000000
--- a/usrp2/top/E1x0/passthru.ucf
+++ /dev/null
@@ -1,6 +0,0 @@
-NET "overo_gpio145"  LOC = "C7"  ;
-NET "cgen_mosi"  LOC = "E22"  ;
-NET "cgen_sclk"  LOC = "J19"  ;
-NET "cgen_sen_b"  LOC = "H20"  ;
-NET "fpga_cfg_din"  LOC = "W17"  ;
-NET "fpga_cfg_cclk"  LOC = "V17"  ;
diff --git a/usrp2/top/E1x0/passthru.v b/usrp2/top/E1x0/passthru.v
deleted file mode 100644
index 486257366..000000000
--- a/usrp2/top/E1x0/passthru.v
+++ /dev/null
@@ -1,35 +0,0 @@
-//
-// Copyright 2011 Ettus Research LLC
-//
-// This program is free software: you can redistribute it and/or modify
-// it under the terms of the GNU General Public License as published by
-// the Free Software Foundation, either version 3 of the License, or
-// (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-// GNU General Public License for more details.
-//
-// You should have received a copy of the GNU General Public License
-// along with this program.  If not, see <http://www.gnu.org/licenses/>.
-//
-
-`timescale 1ns / 1ps
-//////////////////////////////////////////////////////////////////////////////////
-
-module passthru
-  (input overo_gpio145,
-   output cgen_sclk,
-   output cgen_sen_b,
-   output cgen_mosi,
-   input fpga_cfg_din,
-   input fpga_cfg_cclk
-   );
-   
-   assign cgen_sclk = fpga_cfg_cclk;
-   assign cgen_sen_b = overo_gpio145;
-   assign cgen_mosi = fpga_cfg_din;
-   
-   
-endmodule // passthru
diff --git a/usrp2/top/E1x0/u1e.v b/usrp2/top/E1x0/u1e.v
index adf42fd07..dbd6173f3 100644
--- a/usrp2/top/E1x0/u1e.v
+++ b/usrp2/top/E1x0/u1e.v
@@ -36,11 +36,12 @@ module u1e
    output cgen_sclk, output cgen_sen_b, output cgen_mosi, input cgen_miso,     // Clock gen SPI
 
    input cgen_st_status, input cgen_st_ld, input cgen_st_refmon, output cgen_sync_b, output cgen_ref_sel,
+   input overo_gpio65, input overo_gpio128, input overo_gpio145, output overo_gpio147, //aux SPI
    
-   output overo_gpio144, output overo_gpio145, output overo_gpio146, output overo_gpio147,  // Fifo controls
+   output overo_gpio144, output overo_gpio146,  // Fifo controls
    input overo_gpio0, input overo_gpio14, input overo_gpio21, input overo_gpio22,  // Misc GPIO
-   input overo_gpio23, input overo_gpio64, input overo_gpio65, input overo_gpio127, // Misc GPIO
-   input overo_gpio128, input overo_gpio163, input overo_gpio170, input overo_gpio176, // Misc GPIO
+   input overo_gpio23, input overo_gpio64, input overo_gpio127, // Misc GPIO
+   input overo_gpio176, input overo_gpio163, input overo_gpio170, // Misc GPIO
    
    inout [15:0] io_tx, inout [15:0] io_rx,
 
@@ -78,16 +79,26 @@ module u1e
                 .CLK2X(), .CLK2X180(), 
                 .CLK0(clk_fb), .CLK90(clk_fpga), .CLK180(), .CLK270(), 
                 .LOCKED(dcm_locked), .STATUS());
-   
+
    // /////////////////////////////////////////////////////////////////////////
    // SPI
    wire  mosi, sclk, miso;
    assign { db_sclk_tx, db_mosi_tx } = ~db_sen_tx ? {sclk,mosi} : 2'b0;
    assign { db_sclk_rx, db_mosi_rx } = ~db_sen_rx ? {sclk,mosi} : 2'b0;
    assign { sclk_codec, mosi_codec } = ~sen_codec ? {sclk,mosi} : 2'b0;
-   assign { cgen_sclk, cgen_mosi } = ~cgen_sen_b ? {sclk,mosi} : 2'b0;
+   //assign { cgen_sclk, cgen_mosi } = ~cgen_sen_b ? {sclk,mosi} : 2'b0; //replaced by aux spi
    assign miso = (~db_sen_tx & db_miso_tx) | (~db_sen_rx & db_miso_rx) |
-		 (~sen_codec & miso_codec) | (~cgen_sen_b & cgen_miso);
+                 (~sen_codec & miso_codec) | (~cgen_sen_b & cgen_miso);
+
+   //assign the aux spi to the cgen (bypasses wishbone)
+   assign cgen_sclk = overo_gpio65;
+   assign cgen_sen_b = overo_gpio128;
+   assign cgen_mosi = overo_gpio145;
+   wire proc_int; //re-purpose gpio for interrupt when we are not using aux spi
+   assign overo_gpio147 = (cgen_sen_b == 1'b0)? cgen_miso : proc_int;
+
+   wire _cgen_sen_b;
+   //assign cgen_sen_b = _cgen_sen_b; //replaced by aux spi
 
    // /////////////////////////////////////////////////////////////////////////
    // TX DAC -- handle the interleaved data bus to DAC, with clock doubling DLL
@@ -137,18 +148,15 @@ module u1e
 		     .EM_WAIT0(EM_WAIT0), .EM_NCS4(EM_NCS4), .EM_NCS5(EM_NCS5), 
 		     .EM_NCS6(EM_NCS6), .EM_NWE(EM_NWE), .EM_NOE(EM_NOE),
 		     .db_sda(db_sda), .db_scl(db_scl),
-		     .sclk(sclk), .sen({cgen_sen_b,sen_codec,db_sen_tx,db_sen_rx}), .mosi(mosi), .miso(miso),
+		     .sclk(sclk), .sen({_cgen_sen_b,sen_codec,db_sen_tx,db_sen_rx}), .mosi(mosi), .miso(miso),
 		     .cgen_st_status(cgen_st_status), .cgen_st_ld(cgen_st_ld),.cgen_st_refmon(cgen_st_refmon), 
 		     .cgen_sync_b(cgen_sync_b), .cgen_ref_sel(cgen_ref_sel),
-		     .tx_have_space(overo_gpio144), .tx_underrun(overo_gpio145),
-		     .rx_have_data(overo_gpio146), .rx_overrun(overo_gpio147),
+		     .tx_have_space(overo_gpio144),
+		     .rx_have_data(overo_gpio146),
 		     .io_tx(io_tx), .io_rx(io_rx),
 		     .tx_i(tx_i), .tx_q(tx_q), 
 		     .rx_i(DA), .rx_q(DB),
-		     .misc_gpio( {{overo_gpio128,overo_gpio163,overo_gpio170,overo_gpio176},
-				  {overo_gpio0,overo_gpio14,overo_gpio21,overo_gpio22},
-				  {overo_gpio23,overo_gpio64,overo_gpio65,overo_gpio127}}),
-		     .pps_in(PPS_IN) );
+		     .pps_in(PPS_IN), .proc_int(proc_int) );
 
    // /////////////////////////////////////////////////////////////////////////
    // Local Debug
diff --git a/usrp2/top/E1x0/u1e_core.v b/usrp2/top/E1x0/u1e_core.v
index 4c513587b..c4fc16444 100644
--- a/usrp2/top/E1x0/u1e_core.v
+++ b/usrp2/top/E1x0/u1e_core.v
@@ -31,29 +31,36 @@ module u1e_core
    output sclk, output [15:0] sen, output mosi, input miso,
 
    input cgen_st_status, input cgen_st_ld, input cgen_st_refmon, output cgen_sync_b, output cgen_ref_sel,   
-   output tx_have_space, output tx_underrun, output rx_have_data, output rx_overrun,
+   output tx_have_space, output rx_have_data,
    inout [15:0] io_tx, inout [15:0] io_rx, 
    output [13:0] tx_i, output [13:0] tx_q, 
    input [11:0] rx_i, input [11:0] rx_q, 
    
-   input [11:0] misc_gpio, input pps_in
+   input pps_in, output proc_int
    );
 
    localparam TXFIFOSIZE = 13;
    localparam RXFIFOSIZE = 13;
 
    // 64 total regs in address space
-   localparam SR_RX_CTRL = 0;     // 9 regs (+0 to +8)
-   localparam SR_RX_DSP = 16;     // 7 regs (+0 to +6)
-   localparam SR_TX_CTRL = 24;    // 6 regs (+0 to +5)
-   localparam SR_TX_DSP = 32;     // 5 regs (+0 to +4)
-   localparam SR_TIME64 = 40;     // 6 regs (+0 to +5)
-   localparam SR_CLEAR_RX_FIFO = 48; // 1 reg
-   localparam SR_CLEAR_TX_FIFO = 49; // 1 reg
-   localparam SR_GLOBAL_RESET = 50; // 1 reg
-   localparam SR_REG_TEST32 = 52; // 1 reg
-
-   wire [7:0]	COMPAT_NUM = 8'd4;
+   localparam SR_RX_CTRL0 = 0;       // 9 regs (+0 to +8)
+   localparam SR_RX_DSP0 = 10;       // 4 regs (+0 to +3)
+   localparam SR_RX_CTRL1 = 16;      // 9 regs (+0 to +8)
+   localparam SR_RX_DSP1 = 26;       // 4 regs (+0 to +3)
+   localparam SR_ERR_CTRL = 30;      // 1 reg
+   localparam SR_TX_CTRL = 32;       // 4 regs (+0 to +3)
+   localparam SR_TX_DSP = 38;        // 3 regs (+0 to +2)
+
+   localparam SR_TIME64 = 42;        // 6 regs (+0 to +5)
+   localparam SR_RX_FRONT = 48;      // 5 regs (+0 to +4)
+   localparam SR_TX_FRONT = 54;      // 5 regs (+0 to +4)
+
+   localparam SR_REG_TEST32 = 60;    // 1 reg
+   localparam SR_CLEAR_RX_FIFO = 61; // 1 reg
+   localparam SR_CLEAR_TX_FIFO = 62; // 1 reg
+   localparam SR_GLOBAL_RESET = 63;  // 1 reg
+
+   wire [7:0]	COMPAT_NUM = 8'd5;
    
    wire 	wb_clk = clk_fpga;
    wire 	wb_rst, global_reset;
@@ -69,9 +76,9 @@ module u1e_core
    wire 	set_stb;
 
    wire [31:0] 	debug_vt;
-   wire 	rx_overrun_dsp, rx_overrun_gpmc, tx_underrun_dsp, tx_underrun_gpmc;
-   assign rx_overrun = rx_overrun_gpmc | rx_overrun_dsp;
-   assign tx_underrun = tx_underrun_gpmc | tx_underrun_dsp;
+   wire 	rx_overrun_dsp0, rx_overrun_dsp1, rx_overrun_gpmc, tx_underrun_dsp, tx_underrun_gpmc;
+   wire 	rx_overrun = rx_overrun_gpmc | rx_overrun_dsp0 | rx_overrun_dsp1;
+   wire 	tx_underrun = tx_underrun_gpmc | tx_underrun_dsp;
    
    setting_reg #(.my_addr(SR_GLOBAL_RESET), .width(1)) sr_reset
      (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr),
@@ -133,44 +140,82 @@ module u1e_core
 	 .test_rate(test_rate), .test_ctrl(test_ctrl),
 	 .debug(debug_gpmc));
 
-   wire 	 rx_sof = rx_data[32];
-   wire 	 rx_eof = rx_data[33];
    wire 	 rx_src_rdy_int, rx_dst_rdy_int, tx_src_rdy_int, tx_dst_rdy_int;
    
    wire [31:0] 	 debug_rx_dsp, vrc_debug, vrf_debug, vr_debug;
    
    // /////////////////////////////////////////////////////////////////////////
-   // DSP RX
-   wire [31:0] 	 sample_rx;
-   wire 	 strobe_rx, run_rx;
-   wire [35:0] 	 vita_rx_data;
-   wire 	 vita_rx_src_rdy, vita_rx_dst_rdy;
+   // RX ADC Frontend, does IQ Balance, DC Offset, muxing
+
+   wire [23:0] 	 adc_i, adc_q;  // 24 bits is total overkill here, but it matches u2/u2p
+   wire 	 run_rx, run_rx0, run_rx1;
    
-   dsp_core_rx #(.BASE(SR_RX_DSP)) dsp_core_rx
+   rx_frontend #(.BASE(SR_RX_FRONT)) rx_frontend
      (.clk(wb_clk),.rst(wb_rst),
       .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
-      .adc_a({rx_i,2'b0}),.adc_ovf_a(0),.adc_b({rx_q,2'b0}),.adc_ovf_b(0),
-      .sample(sample_rx), .run(run_rx), .strobe(strobe_rx),
-      .debug(debug_rx_dsp) );
+      .adc_a({rx_i,4'b00}),.adc_ovf_a(0),
+      .adc_b({rx_q,4'b00}),.adc_ovf_b(0),
+      .i_out(adc_i), .q_out(adc_q), .run(run_rx0 | run_rx1), .debug());
+   
+   // /////////////////////////////////////////////////////////////////////////
+   // DSP RX 0
 
-   vita_rx_chain #(.BASE(SR_RX_CTRL), .UNIT(0), .FIFOSIZE(9), .PROT_ENG_FLAGS(0)) vita_rx_chain
+   wire [31:0] 	 sample_rx0;
+   wire 	 strobe_rx0;
+   wire [35:0] 	 vita_rx_data0;
+   wire 	 vita_rx_src_rdy0, vita_rx_dst_rdy0;
+   
+   dsp_core_rx #(.BASE(SR_RX_DSP0)) dsp_core_rx0
+     (.clk(wb_clk),.rst(wb_rst),
+      .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
+      .adc_i(adc_i),.adc_ovf_i(0),.adc_q(adc_q),.adc_ovf_q(0),
+      .sample(sample_rx0), .run(run_rx0), .strobe(strobe_rx0),
+      .debug() );
+
+   vita_rx_chain #(.BASE(SR_RX_CTRL0), .UNIT(0), .FIFOSIZE(9), .PROT_ENG_FLAGS(0)) vita_rx_chain0
      (.clk(wb_clk),.reset(wb_rst),.clear(clear_rx),
       .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
-      .vita_time(vita_time), .overrun(rx_overrun_dsp),
-      .sample(sample_rx), .run(run_rx), .strobe(strobe_rx),
-      .rx_data_o(vita_rx_data), .rx_dst_rdy_i(vita_rx_dst_rdy), .rx_src_rdy_o(vita_rx_src_rdy),
-      .debug(vr_debug) );
+      .vita_time(vita_time), .overrun(rx_overrun_dsp0),
+      .sample(sample_rx0), .run(run_rx0), .strobe(strobe_rx0),
+      .rx_data_o(vita_rx_data0), .rx_dst_rdy_i(vita_rx_dst_rdy0), .rx_src_rdy_o(vita_rx_src_rdy0),
+      .debug() );
    
-   fifo36_mux #(.prio(0)) mux_err_stream
+   // /////////////////////////////////////////////////////////////////////////
+   // DSP RX 1
+
+   wire [31:0] 	 sample_rx1;
+   wire 	 strobe_rx1;
+   wire [35:0] 	 vita_rx_data1;
+   wire 	 vita_rx_src_rdy1, vita_rx_dst_rdy1;
+   
+   dsp_core_rx #(.BASE(SR_RX_DSP1)) dsp_core_rx1
+     (.clk(wb_clk),.rst(wb_rst),
+      .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
+      .adc_i(adc_i),.adc_ovf_i(0),.adc_q(adc_q),.adc_ovf_q(0),
+      .sample(sample_rx1), .run(run_rx1), .strobe(strobe_rx1),
+      .debug() );
+
+   vita_rx_chain #(.BASE(SR_RX_CTRL1), .UNIT(1), .FIFOSIZE(9), .PROT_ENG_FLAGS(0)) vita_rx_chain1
+     (.clk(wb_clk),.reset(wb_rst),.clear(clear_rx),
+      .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
+      .vita_time(vita_time), .overrun(rx_overrun_dsp1),
+      .sample(sample_rx1), .run(run_rx1), .strobe(strobe_rx1),
+      .rx_data_o(vita_rx_data1), .rx_dst_rdy_i(vita_rx_dst_rdy1), .rx_src_rdy_o(vita_rx_src_rdy1),
+      .debug() );
+
+   // /////////////////////////////////////////////////////////////////////////
+   // RX Stream muxing
+
+   fifo36_mux #(.prio(0)) mux_data_streams
      (.clk(wb_clk), .reset(wb_rst), .clear(0),
-      .data0_i(vita_rx_data), .src0_rdy_i(vita_rx_src_rdy), .dst0_rdy_o(vita_rx_dst_rdy),
-      .data1_i(tx_err_data), .src1_rdy_i(tx_err_src_rdy), .dst1_rdy_o(tx_err_dst_rdy),
+      .data0_i(vita_rx_data0), .src0_rdy_i(vita_rx_src_rdy0), .dst0_rdy_o(vita_rx_dst_rdy0),
+      .data1_i(vita_rx_data1), .src1_rdy_i(vita_rx_src_rdy1), .dst1_rdy_o(vita_rx_dst_rdy1),
       .data_o(rx_data), .src_rdy_o(rx_src_rdy), .dst_rdy_i(rx_dst_rdy));
-   
+
    // ///////////////////////////////////////////////////////////////////////////////////
    // DSP TX
 
-   wire [15:0] 	 tx_i_int, tx_q_int;
+   wire [23:0] 	 tx_i_int, tx_q_int;
    wire 	 run_tx;
    
    vita_tx_chain #(.BASE_CTRL(SR_TX_CTRL), .BASE_DSP(SR_TX_DSP), 
@@ -183,13 +228,16 @@ module u1e_core
       .vita_time(vita_time),
       .tx_data_i(tx_data), .tx_src_rdy_i(tx_src_rdy), .tx_dst_rdy_o(tx_dst_rdy),
       .err_data_o(tx_err_data), .err_src_rdy_o(tx_err_src_rdy), .err_dst_rdy_i(tx_err_dst_rdy),
-      .dac_a(tx_i_int),.dac_b(tx_q_int),
+      .tx_i(tx_i_int),.tx_q(tx_q_int),
       .underrun(tx_underrun_dsp), .run(run_tx),
       .debug(debug_vt));
-   
-   assign tx_i = tx_i_int[15:2];
-   assign tx_q = tx_q_int[15:2];
-   
+
+   tx_frontend #(.BASE(SR_TX_FRONT), .WIDTH_OUT(14)) tx_frontend
+     (.clk(wb_clk), .rst(wb_rst),
+      .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
+      .tx_i(tx_i_int), .tx_q(tx_q_int), .run(1'b1),
+      .dac_a(tx_i), .dac_b(tx_q));
+
    // /////////////////////////////////////////////////////////////////////////////////////
    // Wishbone Intercon, single master
    wire [dw-1:0] s0_dat_mosi, s1_dat_mosi, s0_dat_miso, s1_dat_miso, s2_dat_mosi, s3_dat_mosi, s2_dat_miso, s3_dat_miso,
@@ -255,7 +303,7 @@ module u1e_core
       .sf_dat_o(sf_dat_mosi),.sf_adr_o(sf_adr),.sf_sel_o(sf_sel),.sf_we_o(sf_we),.sf_cyc_o(sf_cyc),.sf_stb_o(sf_stb),
       .sf_dat_i(sf_dat_miso),.sf_ack_i(sf_ack),.sf_err_i(0),.sf_rty_i(0) );
 
-   assign s5_ack = 0;   assign s9_ack = 0;   assign sa_ack = 0;   assign sb_ack = 0;
+   assign s9_ack = 0;   assign sa_ack = 0;   assign sb_ack = 0;
    assign sc_ack = 0;   assign sd_ack = 0;   assign se_ack = 0;   assign sf_ack = 0;
 
    // /////////////////////////////////////////////////////////////////////////////////////
@@ -336,7 +384,7 @@ module u1e_core
    wire 	scl_pad_i, scl_pad_o, scl_pad_oen_o, sda_pad_i, sda_pad_o, sda_pad_oen_o;
    i2c_master_top #(.ARST_LVL(1)) i2c 
      (.wb_clk_i(wb_clk),.wb_rst_i(wb_rst),.arst_i(1'b0), 
-      .wb_adr_i(s3_adr[4:2]),.wb_dat_i(s3_dat_mosi[7:0]),.wb_dat_o(s3_dat_miso[7:0]),
+      .wb_adr_i(s3_adr[3:1]),.wb_dat_i(s3_dat_mosi[7:0]),.wb_dat_o(s3_dat_miso[7:0]),
       .wb_we_i(s3_we),.wb_stb_i(s3_stb),.wb_cyc_i(s3_cyc),
       .wb_ack_o(s3_ack),.wb_inta_o(),
       .scl_pad_i(scl_pad_i),.scl_pad_o(scl_pad_o),.scl_padoen_o(scl_pad_oen_o),
@@ -361,6 +409,43 @@ module u1e_core
 		.atr(atr_lines),.debug_0(debug_gpio_0),.debug_1(debug_gpio_1),
 		.gpio( {io_tx,io_rx} ) );
 
+   ////////////////////////////////////////////////////////////////////////////
+   // FIFO to WB slave for async messages - Slave #5
+
+   //signals between fifo and buffer module
+   wire [35:0] _tx_err_data;
+   wire _tx_err_src_rdy, _tx_err_dst_rdy;
+
+   fifo_cascade #(.WIDTH(36), .SIZE(9/*512 lines plenty for short pkts*/)) err_fifo(
+        .clk(wb_clk), .reset(wb_rst), .clear(wb_rst),
+        .datain(tx_err_data),   .src_rdy_i(tx_err_src_rdy),   .dst_rdy_o(tx_err_dst_rdy),
+        .dataout(_tx_err_data), .src_rdy_o(_tx_err_src_rdy),  .dst_rdy_i(_tx_err_dst_rdy)
+   );
+
+   wire [31:0] err_status, err_data32;
+   //the buffer is 32 bits, but the data is 16, so mux based on the addr bit
+   assign s5_dat_miso = (s5_adr[1] == 1'b0)? err_data32[15:0] : err_data32[31:16];
+
+   buffer_int2 #(.BASE(SR_ERR_CTRL), .BUF_SIZE(5)) fifo_to_wb(
+        .clk(wb_clk), .rst(wb_rst),
+        .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data),
+        .status(err_status),
+        // Wishbone interface to RAM
+        .wb_clk_i(wb_clk), .wb_rst_i(wb_rst),
+        .wb_we_i(s5_we),   .wb_stb_i(s5_stb),
+        .wb_adr_i(s5_adr), .wb_dat_i({16'b0, s5_dat_mosi}),
+        .wb_dat_o(err_data32), .wb_ack_o(s5_ack),
+        // Write FIFO Interface
+        .wr_data_i(_tx_err_data), .wr_ready_i(_tx_err_src_rdy), .wr_ready_o(_tx_err_dst_rdy),
+        // Read FIFO Interface
+        .rd_data_o(), .rd_ready_o(), .rd_ready_i(1'b0)
+    );
+
+   ////////////////////////////////////////////////////////////////////////////
+   // Interrupts
+
+   assign proc_int = (|err_status[1:0]);
+
    // /////////////////////////////////////////////////////////////////////////
    // Settings Bus -- Slave #8 + 9
 
@@ -369,7 +454,7 @@ module u1e_core
      (.wb_clk(wb_clk),.wb_rst(wb_rst),.wb_adr_i(s8_adr),.wb_dat_i(s8_dat_mosi),
       .wb_stb_i(s8_stb),.wb_we_i(s8_we),.wb_ack_o(s8_ack),
       .strobe(set_stb),.addr(set_addr),.data(set_data) );
-   
+
    // /////////////////////////////////////////////////////////////////////////
    // ATR Controller -- Slave #6
 
@@ -384,8 +469,9 @@ module u1e_core
 
    wire [31:0] reg_test32;
 
+   //this setting reg is persistent across resets, to check for fpga loaded
    setting_reg #(.my_addr(SR_REG_TEST32)) sr_reg_test32
-     (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr),
+     (.clk(wb_clk),.rst(/*wb_rst*/1'b0),.strobe(set_stb),.addr(set_addr),
       .in(set_data),.out(reg_test32),.changed());
 
    wb_readback_mux_16LE readback_mux_32
@@ -394,7 +480,7 @@ module u1e_core
 
       .word00(vita_time[63:32]),        .word01(vita_time[31:0]),
       .word02(vita_time_pps[63:32]),    .word03(vita_time_pps[31:0]),
-      .word04(reg_test32),              .word05(32'b0),
+      .word04(reg_test32),              .word05(err_status),
       .word06(32'b0),                   .word07(32'b0),
       .word08(32'b0),                   .word09(32'b0),
       .word10(32'b0),                   .word11(32'b0),
@@ -423,7 +509,7 @@ module u1e_core
 */
    assign debug = debug_gpmc;
 
-   assign debug_gpio_0 = { {run_tx, 1'b0, run_rx, strobe_rx, tx_i[11:0]}, 
+   assign debug_gpio_0 = { {run_tx, 1'b0, run_rx, strobe_rx0, tx_i[11:0]}, 
 			   {2'b00, tx_src_rdy, tx_dst_rdy, tx_q[11:0]} };
 
    assign debug_gpio_1 = debug_vt;
@@ -431,7 +517,7 @@ module u1e_core
 /*   
    assign debug_gpio_1 = { {rx_enable, rx_src_rdy, rx_dst_rdy, rx_src_rdy & ~rx_dst_rdy},
 			   {tx_enable, tx_src_rdy, tx_dst_rdy, tx_dst_rdy & ~tx_src_rdy},
-			   {rx_sof, rx_eof, rx_src_rdy, rx_dst_rdy, rx_data[33:32],2'b0},
+			   {2'b0, rx_src_rdy, rx_dst_rdy, rx_data[33:32],2'b0},
 			   {2'b0, bus_error, debug_gpmc[4:0] },
 			   {misc_gpio[7:0]} };
   */ 
diff --git a/usrp2/top/N2x0/u2plus_core.v b/usrp2/top/N2x0/u2plus_core.v
index 8a7c6ddee..e2142ad06 100644
--- a/usrp2/top/N2x0/u2plus_core.v
+++ b/usrp2/top/N2x0/u2plus_core.v
@@ -428,7 +428,7 @@ module u2plus_core
    // Buffer Pool Status -- Slave #5   
    
    //compatibility number -> increment when the fpga has been sufficiently altered
-   localparam compat_num = 32'd6;
+   localparam compat_num = {16'd7, 16'd0}; //major, minor
 
    wb_readback_mux buff_pool_status
      (.wb_clk_i(wb_clk), .wb_rst_i(wb_rst), .wb_stb_i(s5_stb),
@@ -584,6 +584,17 @@ module u2plus_core
       .sclk_pad_o(spiflash_clk),.mosi_pad_o(spiflash_mosi),.miso_pad_i(spiflash_miso) );
 
    // /////////////////////////////////////////////////////////////////////////
+   // ADC Frontend
+   wire [23:0] 	 adc_i, adc_q;
+   
+   rx_frontend #(.BASE(SR_RX_FRONT)) rx_frontend
+     (.clk(dsp_clk),.rst(dsp_rst),
+      .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp),
+      .adc_a({adc_a,2'b00}),.adc_ovf_a(adc_ovf_a),
+      .adc_b({adc_b,2'b00}),.adc_ovf_b(adc_ovf_b),
+      .i_out(adc_i), .q_out(adc_q), .run(run_rx0_d1 | run_rx1_d1), .debug());
+   
+   // /////////////////////////////////////////////////////////////////////////
    // DSP RX 0
    wire [31:0] 	 sample_rx0;
    wire 	 clear_rx0, strobe_rx0;
@@ -594,7 +605,7 @@ module u2plus_core
    dsp_core_rx #(.BASE(SR_RX_DSP0)) dsp_core_rx0
      (.clk(dsp_clk),.rst(dsp_rst),
       .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp),
-      .adc_a(adc_a),.adc_ovf_a(adc_ovf_a),.adc_b(adc_b),.adc_ovf_b(adc_ovf_b),
+      .adc_i(adc_i),.adc_ovf_i(adc_ovf_a),.adc_q(adc_q),.adc_ovf_q(adc_ovf_b),
       .sample(sample_rx0), .run(run_rx0_d1), .strobe(strobe_rx0),
       .debug() );
 
@@ -622,7 +633,7 @@ module u2plus_core
    dsp_core_rx #(.BASE(SR_RX_DSP1)) dsp_core_rx1
      (.clk(dsp_clk),.rst(dsp_rst),
       .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp),
-      .adc_a(adc_a),.adc_ovf_a(adc_ovf_a),.adc_b(adc_b),.adc_ovf_b(adc_ovf_b),
+      .adc_i(adc_i),.adc_ovf_i(adc_ovf_a),.adc_q(adc_q),.adc_ovf_q(adc_ovf_b),
       .sample(sample_rx1), .run(run_rx1_d1), .strobe(strobe_rx1),
       .debug() );
 
@@ -676,6 +687,8 @@ module u2plus_core
 	.debug(debug_extfifo),
 	.debug2(debug_extfifo2) );
 
+   wire [23:0] 	 tx_i, tx_q;
+   
    vita_tx_chain #(.BASE_CTRL(SR_TX_CTRL), .BASE_DSP(SR_TX_DSP), 
 		   .REPORT_ERROR(1), .DO_FLOW_CONTROL(1),
 		   .PROT_ENG_FLAGS(1), .USE_TRANS_HEADER(1),
@@ -686,10 +699,16 @@ module u2plus_core
       .vita_time(vita_time),
       .tx_data_i(tx_data), .tx_src_rdy_i(tx_src_rdy), .tx_dst_rdy_o(tx_dst_rdy),
       .err_data_o(tx_err_data), .err_src_rdy_o(tx_err_src_rdy), .err_dst_rdy_i(tx_err_dst_rdy),
-      .dac_a(dac_a),.dac_b(dac_b),
+      .tx_i(tx_i),.tx_q(tx_q),
       .underrun(underrun), .run(run_tx),
       .debug(debug_vt));
-   
+
+   tx_frontend #(.BASE(SR_TX_FRONT)) tx_frontend
+     (.clk(dsp_clk), .rst(dsp_rst),
+      .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp),
+      .tx_i(tx_i), .tx_q(tx_q), .run(1'b1),
+      .dac_a(dac_a), .dac_b(dac_b));
+         
    // ///////////////////////////////////////////////////////////////////////////////////
    // SERDES
 
diff --git a/usrp2/top/USRP2/u2_core.v b/usrp2/top/USRP2/u2_core.v
index ca9762ac5..2e3d41731 100644
--- a/usrp2/top/USRP2/u2_core.v
+++ b/usrp2/top/USRP2/u2_core.v
@@ -283,7 +283,7 @@ module u2_core
       .sf_dat_o(sf_dat_o),.sf_adr_o(sf_adr),.sf_sel_o(sf_sel),.sf_we_o(sf_we),.sf_cyc_o(sf_cyc),.sf_stb_o(sf_stb),
       .sf_dat_i(sf_dat_i),.sf_ack_i(sf_ack),.sf_err_i(0),.sf_rty_i(0));
       
-   //////////////////////////////////////////////////////////////////////////////////////////
+   // ////////////////////////////////////////////////////////////////////////////////////////
    // Reset Controller
    system_control sysctrl (.wb_clk_i(wb_clk), // .por_i(por),
 			   .ram_loader_rst_o(ram_loader_rst),
@@ -433,7 +433,7 @@ module u2_core
    // Buffer Pool Status -- Slave #5   
    
    //compatibility number -> increment when the fpga has been sufficiently altered
-   localparam compat_num = 32'd6;
+   localparam compat_num = {16'd7, 16'd0}; //major, minor
 
    wb_readback_mux buff_pool_status
      (.wb_clk_i(wb_clk), .wb_rst_i(wb_rst), .wb_stb_i(s5_stb),
@@ -583,6 +583,17 @@ module u2_core
    assign sd_dat_i[31:8] = 0;
 
    // /////////////////////////////////////////////////////////////////////////
+   // ADC Frontend
+   wire [23:0] 	 adc_i, adc_q;
+   
+   rx_frontend #(.BASE(SR_RX_FRONT)) rx_frontend
+     (.clk(dsp_clk),.rst(dsp_rst),
+      .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp),
+      .adc_a({adc_a,2'b00}),.adc_ovf_a(adc_ovf_a),
+      .adc_b({adc_b,2'b00}),.adc_ovf_b(adc_ovf_b),
+      .i_out(adc_i), .q_out(adc_q), .run(run_rx0_d1 | run_rx1_d1), .debug());
+   
+   // /////////////////////////////////////////////////////////////////////////
    // DSP RX 0
    wire [31:0] 	 sample_rx0;
    wire 	 clear_rx0, strobe_rx0;
@@ -593,7 +604,7 @@ module u2_core
    dsp_core_rx #(.BASE(SR_RX_DSP0)) dsp_core_rx0
      (.clk(dsp_clk),.rst(dsp_rst),
       .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp),
-      .adc_a(adc_a),.adc_ovf_a(adc_ovf_a),.adc_b(adc_b),.adc_ovf_b(adc_ovf_b),
+      .adc_i(adc_i),.adc_ovf_i(adc_ovf_a),.adc_q(adc_q),.adc_ovf_q(adc_ovf_b),
       .sample(sample_rx0), .run(run_rx0_d1), .strobe(strobe_rx0),
       .debug() );
 
@@ -621,7 +632,7 @@ module u2_core
    dsp_core_rx #(.BASE(SR_RX_DSP1)) dsp_core_rx1
      (.clk(dsp_clk),.rst(dsp_rst),
       .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp),
-      .adc_a(adc_a),.adc_ovf_a(adc_ovf_a),.adc_b(adc_b),.adc_ovf_b(adc_ovf_b),
+      .adc_i(adc_i),.adc_ovf_i(adc_ovf_a),.adc_q(adc_q),.adc_ovf_q(adc_ovf_b),
       .sample(sample_rx1), .run(run_rx1_d1), .strobe(strobe_rx1),
       .debug() );
 
@@ -673,6 +684,8 @@ module u2_core
 	.debug(debug_extfifo),
 	.debug2(debug_extfifo2) );
 
+   wire [23:0] 	 tx_i, tx_q;
+   
    vita_tx_chain #(.BASE_CTRL(SR_TX_CTRL), .BASE_DSP(SR_TX_DSP), 
 		   .REPORT_ERROR(1), .DO_FLOW_CONTROL(1),
 		   .PROT_ENG_FLAGS(1), .USE_TRANS_HEADER(1),
@@ -683,10 +696,16 @@ module u2_core
       .vita_time(vita_time),
       .tx_data_i(tx_data), .tx_src_rdy_i(tx_src_rdy), .tx_dst_rdy_o(tx_dst_rdy),
       .err_data_o(tx_err_data), .err_src_rdy_o(tx_err_src_rdy), .err_dst_rdy_i(tx_err_dst_rdy),
-      .dac_a(dac_a),.dac_b(dac_b),
+      .tx_i(tx_i),.tx_q(tx_q),
       .underrun(underrun), .run(run_tx),
       .debug(debug_vt));
-   
+
+   tx_frontend #(.BASE(SR_TX_FRONT)) tx_frontend
+     (.clk(dsp_clk), .rst(dsp_rst),
+      .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp),
+      .tx_i(tx_i), .tx_q(tx_q), .run(1'b1),
+      .dac_a(dac_a), .dac_b(dac_b));
+         
    // ///////////////////////////////////////////////////////////////////////////////////
    // SERDES