Merge branch 'ise12_exp' into u1e

* ise12_exp:
  zero out debug pins.  helps timing a little bit.
  non-udp uses a different address for the tx dsp core
  manual merge to use localparams from udp version
  from UDP branch, changed names because I want these separate from the non-udp versions
  ignore output files
  new files from udp branch added to main Makefile
  change the debug pins, which makes it more reliable.  This is unnerving.
  experimental mods to make ram loader fully synchronous.  Based on IJB's work
  fixes from IJB from 5/24.  Basically connect unconnected wires.
  removes the icache and pipelines the reads

1 files changed, 69 insertions, 0 deletions

diff --git a/usrp2/control_lib/ram_harvard.v b/usrp2/control_lib/ram_harvard.v
new file mode 100644
index 000000000..948f9b36f
--- /dev/null
+++ b/usrp2/control_lib/ram_harvard.v
@@ -0,0 +1,69 @@
+
+
+// Dual ported, Harvard architecture, cached ram
+
+module ram_harvard
+  #(parameter AWIDTH=15,
+    parameter RAM_SIZE=16384,
+    parameter ICWIDTH=6,
+    parameter DCWIDTH=6)
+   
+    (input wb_clk_i, 
+     input wb_rst_i,
+     // Firmware download port.
+     input [AWIDTH-1:0] ram_loader_adr_i,
+     input [31:0] ram_loader_dat_i,
+     input [3:0] ram_loader_sel_i,
+     input ram_loader_stb_i,
+     input ram_loader_we_i,
+     input ram_loader_done_i,    
+     // Instruction fetch port.
+     input [AWIDTH-1:0] if_adr,
+     output [31:0] if_data,
+     // Data access port.
+     input [AWIDTH-1:0] dwb_adr_i,
+     input [31:0] dwb_dat_i, 
+     output [31:0] dwb_dat_o,
+     input dwb_we_i,
+     output dwb_ack_o,
+     input dwb_stb_i,
+     input [3:0] dwb_sel_i,
+
+     input flush_icache );
+
+   reg 	   ack_d1;
+   reg 	   stb_d1;
+   
+   dpram32 #(.AWIDTH(AWIDTH),.RAM_SIZE(RAM_SIZE)) 
+   sys_ram
+     (.clk(wb_clk_i),
+      .adr1_i(ram_loader_done_i ? if_adr : ram_loader_adr_i),
+      .dat1_i(ram_loader_dat_i),
+      .dat1_o(if_data),
+      .we1_i(ram_loader_done_i ? 1'b0 : ram_loader_we_i),
+      .en1_i(ram_loader_done_i ? 1'b1 : ram_loader_stb_i),
+      //.sel1_i(ram_loader_done_i ? 4'hF : ram_loader_sel_i),
+      .sel1_i(ram_loader_sel_i), // Sel is only for writes anyway
+      .adr2_i(dwb_adr_i),
+      .dat2_i(dwb_dat_i),
+      .dat2_o(dwb_dat_o),
+      .we2_i(dwb_we_i),
+      .en2_i(dwb_stb_i),
+      .sel2_i(dwb_sel_i) 
+      );
+
+   assign dwb_ack_o = dwb_stb_i & (dwb_we_i | (stb_d1 & ~ack_d1));
+
+   always @(posedge wb_clk_i) 
+     if(wb_rst_i)
+       ack_d1 <= 1'b0;
+     else 
+       ack_d1 <= dwb_ack_o;
+
+   always @(posedge wb_clk_i)
+     if(wb_rst_i)
+       stb_d1 <= 0;
+     else
+       stb_d1 <= dwb_stb_i;
+
+endmodule // ram_harvard