Merged r9433:9527 from features/gr-usrp2 into trunk. Adds usrp2 and gr-usrp2 top-level components. Trunk passes distcheck with mb-gcc installed, but currently not without them. The key issue is that when mb-gcc is not installed, the build system skips over the usrp2/firmware directory, and the firmware include files don't get put into the dist tarball. But we can't do the usual DIST_SUBDIRS method as the firmware is a subpackage.

git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9528 221aa14e-8319-0410-a670-987f0aec2ac5

1 files changed, 129 insertions, 0 deletions

diff --git a/top/u2_fpga/Makefile b/top/u2_fpga/Makefile
new file mode 100644
index 000000000..b3245d883
--- /dev/null
+++ b/top/u2_fpga/Makefile
@@ -0,0 +1,129 @@
+FILENAME=u2_fpga_top
+PARTNUM=xc3s1500-5fg456
+
+all: project command xst ngd ncd ncd2 bit 
+
+xst: 
+	xst -ifn ${FILENAME}.cmd -ofn xst.log
+
+ngd: 
+	ngdbuild -nt timestamp -p ${PARTNUM} ${FILENAME}
+
+ncd: 
+	rm -rf ${FILENAME}.ncd
+	map -detail -cm speed -k 8 -retiming on -equivalent_register_removal on -timing -ol high -pr b -p ${PARTNUM} ${FILENAME}.ngd -o ${FILENAME}.ncd ${FILENAME}.pcf
+
+# Place and route ncd file into new ncd file
+ncd2:	
+	par -ol high -xe n -w ${FILENAME}.ncd ${FILENAME} ${FILENAME}.pcf
+
+bit:	
+	bitgen -w ${FILENAME}.ncd -b ${FILENAME}.bit
+
+clean:
+	@rm -rf ${FILENAME}.ngc *.lst *.bit *.lso *.xst *.stx *.syr \
+	*.ngr *.cmd_log _ngc _xmsgs xst *.html *.srp \
+	*.blc *.bld *.ise_ISE_Backup *~ \
+	*.pad *.ngm *.ngd *.par *.pcf *.unroutes     \
+	*.xpi *.bgn *.drc *.bin *.mrp *.csv *.txt    \
+	*.rbt *.ncd ${FILENAME} *_cg templates/ tmp/ \
+        output.dat coregen.log *.ngo *.log ${FILENAME}.map \
+	${FILENAME}_summary.xml ${FILENAME}_usage.xml ${FILENAME}.twr
+
+command:
+	rm -rf ${FILENAME}.cmd
+	@echo "identification"       >> ${FILENAME}.cmd
+	@echo "status"               >> ${FILENAME}.cmd
+	@echo "time short"           >> ${FILENAME}.cmd
+	@echo "memory on"            >> ${FILENAME}.cmd
+	@echo "run "	             >> ${FILENAME}.cmd
+	@echo "-top ${FILENAME}"     >> ${FILENAME}.cmd
+	@echo "-ifn ${FILENAME}.prj" >> ${FILENAME}.cmd
+	@echo "-ifmt Verilog "       >> ${FILENAME}.cmd
+	@echo "-ofn ${FILENAME} "    >> ${FILENAME}.cmd
+	@echo "-p ${PARTNUM}"        >> ${FILENAME}.cmd
+	@echo "-bufg 6"              >> ${FILENAME}.cmd
+	@echo "-vlgincdir { ../../opencores/i2c/rtl/verilog ../../eth/rtl/verilog/ ../../opencores/spi/rtl/verilog}"  >> ${FILENAME}.cmd
+
+project:
+	rm -f ${FILENAME}.prj
+	@echo '`include "../../eth/rtl/verilog/TECH/duram.v" '   			>> ${FILENAME}.prj
+	@echo '`include "../../sdr_lib/sign_extend.v" '   				>> ${FILENAME}.prj
+	@echo '`include "../../sdr_lib/cordic_stage.v" '   				>> ${FILENAME}.prj
+	@echo '`include "../../sdr_lib/cic_int_shifter.v" '   				>> ${FILENAME}.prj
+	@echo '`include "../../sdr_lib/cic_dec_shifter.v" '   				>> ${FILENAME}.prj
+	@echo '`include "../../opencores/i2c/rtl/verilog/i2c_master_bit_ctrl.v" '   	>> ${FILENAME}.prj
+	@echo '`include "../../opencores/aemb/rtl/verilog/aeMB_regfile.v" '   		>> ${FILENAME}.prj
+	@echo '`include "../../opencores/aemb/rtl/verilog/aeMB_fetch.v" '   		>> ${FILENAME}.prj
+	@echo '`include "../../opencores/aemb/rtl/verilog/aeMB_decode.v" '   		>> ${FILENAME}.prj
+	@echo '`include "../../opencores/aemb/rtl/verilog/aeMB_control.v" '   		>> ${FILENAME}.prj
+	@echo '`include "../../opencores/aemb/rtl/verilog/aeMB_aslu.v" '   		>> ${FILENAME}.prj
+	@echo '`include "../../eth/rtl/verilog/miim/eth_shiftreg.v" '   		>> ${FILENAME}.prj
+	@echo '`include "../../eth/rtl/verilog/miim/eth_outputcontrol.v" '   		>> ${FILENAME}.prj
+	@echo '`include "../../eth/rtl/verilog/miim/eth_clockgen.v" '   		>> ${FILENAME}.prj
+	@echo '`include "../../eth/rtl/verilog/TECH/eth_clk_switch.v" '   		>> ${FILENAME}.prj
+	@echo '`include "../../eth/rtl/verilog/TECH/eth_clk_div2.v" '   		>> ${FILENAME}.prj
+	@echo '`include "../../eth/rtl/verilog/Reg_int.v" '   				>> ${FILENAME}.prj
+	@echo '`include "../../eth/rtl/verilog/RMON/RMON_dpram.v" '   			>> ${FILENAME}.prj
+	@echo '`include "../../eth/rtl/verilog/RMON/RMON_ctrl.v" '   			>> ${FILENAME}.prj
+	@echo '`include "../../eth/rtl/verilog/RMON/RMON_addr_gen.v" '   		>> ${FILENAME}.prj
+	@echo '`include "../../eth/rtl/verilog/MAC_tx/flow_ctrl.v" '   			>> ${FILENAME}.prj
+	@echo '`include "../../eth/rtl/verilog/MAC_tx/Ramdon_gen.v" '   		>> ${FILENAME}.prj
+	@echo '`include "../../eth/rtl/verilog/MAC_tx/MAC_tx_ctrl.v" '   		>> ${FILENAME}.prj
+	@echo '`include "../../eth/rtl/verilog/MAC_tx/MAC_tx_addr_add.v" '   		>> ${FILENAME}.prj
+	@echo '`include "../../eth/rtl/verilog/MAC_tx/MAC_tx_FF.v" '   			>> ${FILENAME}.prj
+	@echo '`include "../../eth/rtl/verilog/MAC_tx/CRC_gen.v" '   			>> ${FILENAME}.prj
+	@echo '`include "../../eth/rtl/verilog/MAC_rx/MAC_rx_ctrl.v" '   		>> ${FILENAME}.prj
+	@echo '`include "../../eth/rtl/verilog/MAC_rx/MAC_rx_add_chk.v" '   		>> ${FILENAME}.prj
+	@echo '`include "../../eth/rtl/verilog/MAC_rx/MAC_rx_FF.v" '   			>> ${FILENAME}.prj
+	@echo '`include "../../eth/rtl/verilog/MAC_rx/CRC_chk.v" '   			>> ${FILENAME}.prj
+	@echo '`include "../../eth/rtl/verilog/MAC_rx/Broadcast_filter.v" '   		>> ${FILENAME}.prj
+	@echo '`include "../../control_lib/ram_2port.v" '   				>> ${FILENAME}.prj
+	@echo '`include "../../sdr_lib/cordic.v" '   					>> ${FILENAME}.prj
+	@echo '`include "../../sdr_lib/cic_interp.v" '   				>> ${FILENAME}.prj
+	@echo '`include "../../sdr_lib/cic_decim.v" '   				>> ${FILENAME}.prj
+	@echo '`include "../../opencores/spi/rtl/verilog/spi_shift.v" '   		>> ${FILENAME}.prj
+	@echo '`include "../../opencores/spi/rtl/verilog/spi_clgen.v" '   		>> ${FILENAME}.prj
+	@echo '`include "../../opencores/i2c/rtl/verilog/i2c_master_byte_ctrl.v" '   	>> ${FILENAME}.prj
+	@echo '`include "../../opencores/aemb/rtl/verilog/aeMB_core.v" '   		>> ${FILENAME}.prj
+	@echo '`include "../../eth/rtl/verilog/eth_miim.v" '   				>> ${FILENAME}.prj
+	@echo '`include "../../eth/rtl/verilog/RMON.v" '   				>> ${FILENAME}.prj
+	@echo '`include "../../eth/rtl/verilog/Phy_int.v" '   				>> ${FILENAME}.prj
+	@echo '`include "../../eth/rtl/verilog/MAC_tx.v" '   				>> ${FILENAME}.prj
+	@echo '`include "../../eth/rtl/verilog/MAC_rx.v" '   				>> ${FILENAME}.prj
+	@echo '`include "../../eth/rtl/verilog/Clk_ctrl.v" '   				>> ${FILENAME}.prj
+	@echo '`include "../../control_lib/strobe_gen.v" '   				>> ${FILENAME}.prj
+	@echo '`include "../../control_lib/ss_rcvr.v" '   				>> ${FILENAME}.prj
+	@echo '`include "../../control_lib/shortfifo.v" '   				>> ${FILENAME}.prj
+	@echo '`include "../../control_lib/setting_reg.v" '   				>> ${FILENAME}.prj
+	@echo '`include "../../control_lib/mux8.v" '   					>> ${FILENAME}.prj
+	@echo '`include "../../control_lib/mux4.v" '   					>> ${FILENAME}.prj
+	@echo '`include "../../control_lib/longfifo.v" '   				>> ${FILENAME}.prj
+	@echo '`include "../../control_lib/decoder_3_8.v" '   				>> ${FILENAME}.prj
+	@echo '`include "../../control_lib/buffer_int.v" '   				>> ${FILENAME}.prj
+	@echo '`include "../../control_lib/CRC16_D16.v" '   				>> ${FILENAME}.prj
+	@echo '`include "../../sdr_lib/tx_control.v" '   				>> ${FILENAME}.prj
+	@echo '`include "../../sdr_lib/rx_control.v" '   				>> ${FILENAME}.prj
+	@echo '`include "../../sdr_lib/dsp_core_tx.v" '   				>> ${FILENAME}.prj
+	@echo '`include "../../sdr_lib/dsp_core_rx.v" '   				>> ${FILENAME}.prj
+	@echo '`include "../../opencores/spi/rtl/verilog/spi_top.v" '   		>> ${FILENAME}.prj
+	@echo '`include "../../opencores/simple_pic/rtl/simple_pic.v" '   		>> ${FILENAME}.prj
+	@echo '`include "../../opencores/i2c/rtl/verilog/i2c_master_top.v" '   		>> ${FILENAME}.prj
+	@echo '`include "../../opencores/aemb/rtl/verilog/aeMB_core_BE.v" '   		>> ${FILENAME}.prj
+	@echo '`include "../../eth/rtl/verilog/MAC_top.v" '   				>> ${FILENAME}.prj
+	@echo '`include "../../eth/mac_txfifo_int.v" '   				>> ${FILENAME}.prj
+	@echo '`include "../../eth/mac_rxfifo_int.v" '   				>> ${FILENAME}.prj
+	@echo '`include "../../control_lib/wb_readback_mux.v" '   			>> ${FILENAME}.prj
+	@echo '`include "../../control_lib/wb_1master.v" '   				>> ${FILENAME}.prj
+	@echo '`include "../../control_lib/timer.v" '   				>> ${FILENAME}.prj
+	@echo '`include "../../control_lib/system_control.v" '   			>> ${FILENAME}.prj
+	@echo '`include "../../control_lib/settings_bus.v" '   				>> ${FILENAME}.prj
+	@echo '`include "../../control_lib/serdes_tx.v" '   				>> ${FILENAME}.prj
+	@echo '`include "../../control_lib/serdes_rx.v" '   				>> ${FILENAME}.prj
+	@echo '`include "../../control_lib/ram_wb_harvard.v" '   			>> ${FILENAME}.prj
+	@echo '`include "../../control_lib/ram_loader.v" '   				>> ${FILENAME}.prj
+	@echo '`include "../../control_lib/nsgpio.v" '   				>> ${FILENAME}.prj
+	@echo '`include "../../control_lib/buffer_pool.v" '   				>> ${FILENAME}.prj
+	@echo '`include "../u2_basic/u2_basic.v" '   					>> ${FILENAME}.prj
+	@echo '`include "u2_fpga_top.v" '   						>> ${FILENAME}.prj
+	@echo '`include "../../eth/rtl/verilog/elastic_buffer.v" '   			>> ${FILENAME}.prj