From 61f2f0214c5999ea42a368a4fc99f03d8eb28d1e Mon Sep 17 00:00:00 2001 From: jcorgan Date: Mon, 8 Sep 2008 01:00:12 +0000 Subject: Merged r9433:9527 from features/gr-usrp2 into trunk. Adds usrp2 and gr-usrp2 top-level components. Trunk passes distcheck with mb-gcc installed, but currently not without them. The key issue is that when mb-gcc is not installed, the build system skips over the usrp2/firmware directory, and the firmware include files don't get put into the dist tarball. But we can't do the usual DIST_SUBDIRS method as the firmware is a subpackage. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9528 221aa14e-8319-0410-a670-987f0aec2ac5 --- top/u2_fpga/Makefile | 129 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 129 insertions(+) create mode 100644 top/u2_fpga/Makefile (limited to 'top/u2_fpga/Makefile') diff --git a/top/u2_fpga/Makefile b/top/u2_fpga/Makefile new file mode 100644 index 000000000..b3245d883 --- /dev/null +++ b/top/u2_fpga/Makefile @@ -0,0 +1,129 @@ +FILENAME=u2_fpga_top +PARTNUM=xc3s1500-5fg456 + +all: project command xst ngd ncd ncd2 bit + +xst: + xst -ifn ${FILENAME}.cmd -ofn xst.log + +ngd: + ngdbuild -nt timestamp -p ${PARTNUM} ${FILENAME} + +ncd: + rm -rf ${FILENAME}.ncd + map -detail -cm speed -k 8 -retiming on -equivalent_register_removal on -timing -ol high -pr b -p ${PARTNUM} ${FILENAME}.ngd -o ${FILENAME}.ncd ${FILENAME}.pcf + +# Place and route ncd file into new ncd file +ncd2: + par -ol high -xe n -w ${FILENAME}.ncd ${FILENAME} ${FILENAME}.pcf + +bit: + bitgen -w ${FILENAME}.ncd -b ${FILENAME}.bit + +clean: + @rm -rf ${FILENAME}.ngc *.lst *.bit *.lso *.xst *.stx *.syr \ + *.ngr *.cmd_log _ngc _xmsgs xst *.html *.srp \ + *.blc *.bld *.ise_ISE_Backup *~ \ + *.pad *.ngm *.ngd *.par *.pcf *.unroutes \ + *.xpi *.bgn *.drc *.bin *.mrp *.csv *.txt \ + *.rbt *.ncd ${FILENAME} *_cg templates/ tmp/ \ + output.dat coregen.log *.ngo *.log ${FILENAME}.map \ + ${FILENAME}_summary.xml ${FILENAME}_usage.xml ${FILENAME}.twr + +command: + rm -rf ${FILENAME}.cmd + @echo "identification" >> ${FILENAME}.cmd + @echo "status" >> ${FILENAME}.cmd + @echo "time short" >> ${FILENAME}.cmd + @echo "memory on" >> ${FILENAME}.cmd + @echo "run " >> ${FILENAME}.cmd + @echo "-top ${FILENAME}" >> ${FILENAME}.cmd + @echo "-ifn ${FILENAME}.prj" >> ${FILENAME}.cmd + @echo "-ifmt Verilog " >> ${FILENAME}.cmd + @echo "-ofn ${FILENAME} " >> ${FILENAME}.cmd + @echo "-p ${PARTNUM}" >> ${FILENAME}.cmd + @echo "-bufg 6" >> ${FILENAME}.cmd + @echo "-vlgincdir { ../../opencores/i2c/rtl/verilog ../../eth/rtl/verilog/ ../../opencores/spi/rtl/verilog}" >> ${FILENAME}.cmd + +project: + rm -f ${FILENAME}.prj + @echo '`include "../../eth/rtl/verilog/TECH/duram.v" ' >> ${FILENAME}.prj + @echo '`include "../../sdr_lib/sign_extend.v" ' >> ${FILENAME}.prj + @echo '`include "../../sdr_lib/cordic_stage.v" ' >> ${FILENAME}.prj + @echo '`include "../../sdr_lib/cic_int_shifter.v" ' >> ${FILENAME}.prj + @echo '`include "../../sdr_lib/cic_dec_shifter.v" ' >> ${FILENAME}.prj + @echo '`include "../../opencores/i2c/rtl/verilog/i2c_master_bit_ctrl.v" ' >> ${FILENAME}.prj + @echo '`include "../../opencores/aemb/rtl/verilog/aeMB_regfile.v" ' >> ${FILENAME}.prj + @echo '`include "../../opencores/aemb/rtl/verilog/aeMB_fetch.v" ' >> ${FILENAME}.prj + @echo '`include "../../opencores/aemb/rtl/verilog/aeMB_decode.v" ' >> ${FILENAME}.prj + @echo '`include "../../opencores/aemb/rtl/verilog/aeMB_control.v" ' >> ${FILENAME}.prj + @echo '`include "../../opencores/aemb/rtl/verilog/aeMB_aslu.v" ' >> ${FILENAME}.prj + @echo '`include "../../eth/rtl/verilog/miim/eth_shiftreg.v" ' >> ${FILENAME}.prj + @echo '`include "../../eth/rtl/verilog/miim/eth_outputcontrol.v" ' >> ${FILENAME}.prj + @echo '`include "../../eth/rtl/verilog/miim/eth_clockgen.v" ' >> ${FILENAME}.prj + @echo '`include "../../eth/rtl/verilog/TECH/eth_clk_switch.v" ' >> ${FILENAME}.prj + @echo '`include "../../eth/rtl/verilog/TECH/eth_clk_div2.v" ' >> ${FILENAME}.prj + @echo '`include "../../eth/rtl/verilog/Reg_int.v" ' >> ${FILENAME}.prj + @echo '`include "../../eth/rtl/verilog/RMON/RMON_dpram.v" ' >> ${FILENAME}.prj + @echo '`include "../../eth/rtl/verilog/RMON/RMON_ctrl.v" ' >> ${FILENAME}.prj + @echo '`include "../../eth/rtl/verilog/RMON/RMON_addr_gen.v" ' >> ${FILENAME}.prj + @echo '`include "../../eth/rtl/verilog/MAC_tx/flow_ctrl.v" ' >> ${FILENAME}.prj + @echo '`include "../../eth/rtl/verilog/MAC_tx/Ramdon_gen.v" ' >> ${FILENAME}.prj + @echo '`include "../../eth/rtl/verilog/MAC_tx/MAC_tx_ctrl.v" ' >> ${FILENAME}.prj + @echo '`include "../../eth/rtl/verilog/MAC_tx/MAC_tx_addr_add.v" ' >> ${FILENAME}.prj + @echo '`include "../../eth/rtl/verilog/MAC_tx/MAC_tx_FF.v" ' >> ${FILENAME}.prj + @echo '`include "../../eth/rtl/verilog/MAC_tx/CRC_gen.v" ' >> ${FILENAME}.prj + @echo '`include "../../eth/rtl/verilog/MAC_rx/MAC_rx_ctrl.v" ' >> ${FILENAME}.prj + @echo '`include "../../eth/rtl/verilog/MAC_rx/MAC_rx_add_chk.v" ' >> ${FILENAME}.prj + @echo '`include "../../eth/rtl/verilog/MAC_rx/MAC_rx_FF.v" ' >> ${FILENAME}.prj + @echo '`include "../../eth/rtl/verilog/MAC_rx/CRC_chk.v" ' >> ${FILENAME}.prj + @echo '`include "../../eth/rtl/verilog/MAC_rx/Broadcast_filter.v" ' >> ${FILENAME}.prj + @echo '`include "../../control_lib/ram_2port.v" ' >> ${FILENAME}.prj + @echo '`include "../../sdr_lib/cordic.v" ' >> ${FILENAME}.prj + @echo '`include "../../sdr_lib/cic_interp.v" ' >> ${FILENAME}.prj + @echo '`include "../../sdr_lib/cic_decim.v" ' >> ${FILENAME}.prj + @echo '`include "../../opencores/spi/rtl/verilog/spi_shift.v" ' >> ${FILENAME}.prj + @echo '`include "../../opencores/spi/rtl/verilog/spi_clgen.v" ' >> ${FILENAME}.prj + @echo '`include "../../opencores/i2c/rtl/verilog/i2c_master_byte_ctrl.v" ' >> ${FILENAME}.prj + @echo '`include "../../opencores/aemb/rtl/verilog/aeMB_core.v" ' >> ${FILENAME}.prj + @echo '`include "../../eth/rtl/verilog/eth_miim.v" ' >> ${FILENAME}.prj + @echo '`include "../../eth/rtl/verilog/RMON.v" ' >> ${FILENAME}.prj + @echo '`include "../../eth/rtl/verilog/Phy_int.v" ' >> ${FILENAME}.prj + @echo '`include "../../eth/rtl/verilog/MAC_tx.v" ' >> ${FILENAME}.prj + @echo '`include "../../eth/rtl/verilog/MAC_rx.v" ' >> ${FILENAME}.prj + @echo '`include "../../eth/rtl/verilog/Clk_ctrl.v" ' >> ${FILENAME}.prj + @echo '`include "../../control_lib/strobe_gen.v" ' >> ${FILENAME}.prj + @echo '`include "../../control_lib/ss_rcvr.v" ' >> ${FILENAME}.prj + @echo '`include "../../control_lib/shortfifo.v" ' >> ${FILENAME}.prj + @echo '`include "../../control_lib/setting_reg.v" ' >> ${FILENAME}.prj + @echo '`include "../../control_lib/mux8.v" ' >> ${FILENAME}.prj + @echo '`include "../../control_lib/mux4.v" ' >> ${FILENAME}.prj + @echo '`include "../../control_lib/longfifo.v" ' >> ${FILENAME}.prj + @echo '`include "../../control_lib/decoder_3_8.v" ' >> ${FILENAME}.prj + @echo '`include "../../control_lib/buffer_int.v" ' >> ${FILENAME}.prj + @echo '`include "../../control_lib/CRC16_D16.v" ' >> ${FILENAME}.prj + @echo '`include "../../sdr_lib/tx_control.v" ' >> ${FILENAME}.prj + @echo '`include "../../sdr_lib/rx_control.v" ' >> ${FILENAME}.prj + @echo '`include "../../sdr_lib/dsp_core_tx.v" ' >> ${FILENAME}.prj + @echo '`include "../../sdr_lib/dsp_core_rx.v" ' >> ${FILENAME}.prj + @echo '`include "../../opencores/spi/rtl/verilog/spi_top.v" ' >> ${FILENAME}.prj + @echo '`include "../../opencores/simple_pic/rtl/simple_pic.v" ' >> ${FILENAME}.prj + @echo '`include "../../opencores/i2c/rtl/verilog/i2c_master_top.v" ' >> ${FILENAME}.prj + @echo '`include "../../opencores/aemb/rtl/verilog/aeMB_core_BE.v" ' >> ${FILENAME}.prj + @echo '`include "../../eth/rtl/verilog/MAC_top.v" ' >> ${FILENAME}.prj + @echo '`include "../../eth/mac_txfifo_int.v" ' >> ${FILENAME}.prj + @echo '`include "../../eth/mac_rxfifo_int.v" ' >> ${FILENAME}.prj + @echo '`include "../../control_lib/wb_readback_mux.v" ' >> ${FILENAME}.prj + @echo '`include "../../control_lib/wb_1master.v" ' >> ${FILENAME}.prj + @echo '`include "../../control_lib/timer.v" ' >> ${FILENAME}.prj + @echo '`include "../../control_lib/system_control.v" ' >> ${FILENAME}.prj + @echo '`include "../../control_lib/settings_bus.v" ' >> ${FILENAME}.prj + @echo '`include "../../control_lib/serdes_tx.v" ' >> ${FILENAME}.prj + @echo '`include "../../control_lib/serdes_rx.v" ' >> ${FILENAME}.prj + @echo '`include "../../control_lib/ram_wb_harvard.v" ' >> ${FILENAME}.prj + @echo '`include "../../control_lib/ram_loader.v" ' >> ${FILENAME}.prj + @echo '`include "../../control_lib/nsgpio.v" ' >> ${FILENAME}.prj + @echo '`include "../../control_lib/buffer_pool.v" ' >> ${FILENAME}.prj + @echo '`include "../u2_basic/u2_basic.v" ' >> ${FILENAME}.prj + @echo '`include "u2_fpga_top.v" ' >> ${FILENAME}.prj + @echo '`include "../../eth/rtl/verilog/elastic_buffer.v" ' >> ${FILENAME}.prj -- cgit v1.2.3