gr-usrptest: Initial creation

- new OOT-blocks: phase_calc_ccf hier-block, measurement_sink_f
 - new python submodules: flowgraphs, functions, rts_tests
 - new apps: usrp_phasealignment.py - cmdline example for manual testing

 OOT-Blocks:
  - phase_calc_ccf takes two complex input streams and conjugate
    multiplys them and extracts the phase from the result and converts
    it to degree scale
  - measurement_sink_f: takes a float input stream and calculates average and stddev for a
    specified number of samples. Start of a measurement is invoked by a
    call of start_run() on the block. After a couple of runs average and
    stddev can be extracted.

 Python modules:
  - flowgrahps contains reconfigurable flowgraphs for different GNU
    Radio RF test cases
  - functions contains functions which are used in different apps/RTS
    scripts
  - rts_tests contains test cases which are meant to be executed from
    the RTS system. Depends on TinyDB, labview_automation

 Apps:
  - usrp_phasealignment.py is an example how to use the underlying
    flowgraph to measure phase differences. Commandline arguments of
    uhd_app can be used and several additional arguments can/have to be
    specified. Runs a phase difference measurement --runs number of times and averages
    phase difference over --duration seconds. Between measurements USRP
    sinks are retuned to random frequencies in daughterboard range.
    Results are displayed using motherboard serial and daughterboard
    serial

1 files changed, 38 insertions, 0 deletions

diff --git a/tools/gr-usrptest/grc/usrptest_measurement_sink_f.xml b/tools/gr-usrptest/grc/usrptest_measurement_sink_f.xml
new file mode 100644
index 000000000..c681e457f
--- /dev/null
+++ b/tools/gr-usrptest/grc/usrptest_measurement_sink_f.xml
@@ -0,0 +1,38 @@
+<?xml version="1.0"?>
+<block>
+  <name>measurement_sink_f</name>
+  <key>usrptest_measurement_sink_f</key>
+  <category>[usrptest]</category>
+  <import>import usrptest</import>
+  <make>usrptest.measurement_sink_f($num_samples, $)</make>
+  <!-- Make one 'param' node for every Parameter you want settable from the GUI.
+       Sub-nodes:
+       * name
+       * key (makes the value accessible as $keyname, e.g. in the make node)
+       * type -->
+  <param>
+    <name>...</name>
+    <key>...</key>
+    <type>...</type>
+  </param>
+
+  <!-- Make one 'sink' node per input. Sub-nodes:
+       * name (an identifier for the GUI)
+       * type
+       * vlen
+       * optional (set to 1 for optional inputs) -->
+  <sink>
+    <name>in</name>
+    <type><!-- e.g. int, float, complex, byte, short, xxx_vector, ...--></type>
+  </sink>
+
+  <!-- Make one 'source' node per output. Sub-nodes:
+       * name (an identifier for the GUI)
+       * type
+       * vlen
+       * optional (set to 1 for optional inputs) -->
+  <source>
+    <name>out</name>
+    <type><!-- e.g. int, float, complex, byte, short, xxx_vector, ...--></type>
+  </source>
+</block>