first cut at a wishbone interface and wrapping the core

git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10762 221aa14e-8319-0410-a670-987f0aec2ac5

1 files changed, 134 insertions, 0 deletions

diff --git a/simple_gemac/simple_gemac_wb.v b/simple_gemac/simple_gemac_wb.v
new file mode 100644
index 000000000..96189e1d9
--- /dev/null
+++ b/simple_gemac/simple_gemac_wb.v
@@ -0,0 +1,134 @@
+
+module wb_reg
+  #(parameter ADDR=0,
+    parameter DEFAULT=0)
+   (input clk, input rst, 
+    input [5:0] adr, input wr_acc,
+    input [31:0] dat_i, output reg [31:0] dat_o);
+
+   always @(posedge clk)
+     if(rst)
+       dat_o <= DEFAULT;
+     else if(wr_acc & (adr == ADDR))
+       dat_o <= dat_i;
+   
+endmodule // wb_reg
+
+   
+
+module simple_gemac_wb
+  (input wb_clk, input wb_rst,
+   input wb_cyc, input wb_stb, input wb_ack, input wb_we,
+   input [7:0] wb_adr, input [31:0] wb_dat_i, output reg [31:0] wb_dat_o,
+   
+   inout mdio, output mdc,
+   output [47:0] ucast_addr, output [47:0] mcast_addr,
+   output pass_ucast, output pass_mcast, output pass_bcast,
+   output pass_pause, output pass_all, output pause_en  );
+
+   wire   wr_acc  = wb_cyc & wb_stb & wb_we;
+   wire   rd_acc  = wb_cyc & wb_stb & ~wb_we;
+   
+   wire [5:0] misc_settings;
+   assign {pass_ucast, pass_mcast, pass_bcast, pass_pause, pass_all, pause_en} 	= misc_settings;
+
+   wb_reg #(.ADDR(0),.DEFAULT(6'b111001))
+   wb_reg_settings (.clk(wb_clk), .rst(wb_rst), .adr(wb_adr[7:2]), .dat_i(wb_dat_i), .dat_o(misc_settings) );
+   wb_reg #(.ADDR(1),.DEFAULT(0))
+   wb_reg_ucast_h (.clk(wb_clk), .rst(wb_rst), .adr(wb_adr[7:2]), .dat_i(wb_dat_i), .dat_o(ucast_addr[47:32]) );
+   wb_reg #(.ADDR(2),.DEFAULT(0))
+   wb_reg_ucast_l (.clk(wb_clk), .rst(wb_rst), .adr(wb_adr[7:2]), .dat_i(wb_dat_i), .dat_o(ucast_addr[31:0]) );
+   wb_reg #(.ADDR(3),.DEFAULT(0))
+   wb_reg_mcast_h (.clk(wb_clk), .rst(wb_rst), .adr(wb_adr[7:2]), .dat_i(wb_dat_i), .dat_o(mcast_addr[47:32]) );
+   wb_reg #(.ADDR(4),.DEFAULT(0))
+   wb_reg_mcast_l (.clk(wb_clk), .rst(wb_rst), .adr(wb_adr[7:2]), .dat_i(wb_dat_i), .dat_o(mcast_addr[31:0]) );
+
+   //MII to CPU 
+   wire [7:0] Divider;            // Divider for the host clock
+   wire [15:0] CtrlData;          // Control Data (to be written to the PHY reg.)
+   wire [4:0]  Rgad;               // Register Address (within the PHY)
+   wire [4:0]  Fiad;               // PHY Address
+   wire        NoPre;              // No Preamble (no 32-bit preamble)
+   wire        WCtrlData;          // Write Control Data operation
+   wire        RStat;              // Read Status operation
+   wire        ScanStat;           // Scan Status operation
+   wire        Busy;               // Busy Signal
+   wire        LinkFail;           // Link Integrity Signal
+   wire        Nvalid;             // Invalid Status (qualifier for the valid scan result)
+   wire [15:0] Prsd;               // Read Status Data (data read from the PHY)
+   wire        WCtrlDataStart;     // This signals resets the WCTRLDATA bit in the MIIM Command register
+   wire        RStatStart;         // This signal resets the RSTAT BIT in the MIIM Command register
+   wire        UpdateMIIRX_DATAReg; // Updates MII RX_DATA register with read data
+   
+   // registers for controlling the MII interface
+   reg [2:0]   MIICOMMAND;
+   wire [12:0] MIIADDRESS;
+   reg [15:0]  MIIRX_DATA;
+   wire [2:0]  MIISTATUS;
+
+   wb_reg #(.ADDR(5),.DEFAULT(0))
+   wb_reg_miimoder (.clk(wb_clk), .rst(wb_rst), .adr(wb_adr[7:2]), .dat_i(wb_dat_i), .dat_o({NoPre,Divider}) );
+   
+   wb_reg #(.ADDR(6),.DEFAULT(0))
+   wb_reg_miiaddr (.clk(wb_clk), .rst(wb_rst), .adr(wb_adr[7:2]), .dat_i(wb_dat_i), .dat_o(MIIADDRESS) );
+   
+   wb_reg #(.ADDR(7),.DEFAULT(0))
+   wb_reg_miidata (.clk(wb_clk), .rst(wb_rst), .adr(wb_adr[7:2]), .dat_i(wb_dat_i), .dat_o(CtrlData) );
+   
+   // MIICOMMAND register - needs special treatment because of auto-resetting bits
+   always @ (posedge wb_clk)
+     if (wb_rst)
+       MIICOMMAND <= 0;
+     else
+       if (wr_acc & (wb_adr == 8'd8))
+         MIICOMMAND <= wb_dat_i;
+       else
+         begin
+            if ( WCtrlDataStart )
+              MIICOMMAND[2] <= 0;
+            if ( RStatStart )
+              MIICOMMAND[1] <= 0;
+         end
+   
+   // MIIRX_DATA register
+   always @(posedge wb_clk)
+     if (wb_rst)
+       MIIRX_DATA <= 0;
+     else
+       if (UpdateMIIRX_DATAReg )
+         MIIRX_DATA <= Prsd;
+
+   // MIICOMMAND
+   assign WCtrlData  = MIICOMMAND[2];
+   assign RStat      = MIICOMMAND[1];
+   assign ScanStat   = MIICOMMAND[0];
+   // MIIADDRESS
+   assign Rgad 	     = MIIADDRESS[12:8];
+   assign Fiad 	     = MIIADDRESS[4:0];
+   // MIISTATUS
+   assign MIISTATUS[2:0] = { Nvalid, Busy, LinkFail };
+   
+   eth_miim eth_miim
+     (.Clk(wb_clk), .Reset(wb_rst), 
+      .Divider(Divider), .NoPre(NoPre), .CtrlData(CtrlData), .Rgad(Rgad), .Fiad(Fiad), 
+      .WCtrlData(WCtrlData), .RStat(RStat), .ScanStat(ScanStat), .Mdio(mdio), .Mdc(mdc), 
+      .Busy(Busy), .Prsd(Prsd), .LinkFail(LinkFail), .Nvalid(Nvalid), 
+      .WCtrlDataStart(WCtrlDataStart), .RStatStart(RStatStart), 
+      .UpdateMIIRX_DATAReg(UpdateMIIRX_DATAReg) );
+
+   always @(posedge wb_clk)
+     case(wb_adr)
+       0 : wb_dat_o <= misc_settings;
+       1 : wb_dat_o <= ucast_addr[47:32];
+       2 : wb_dat_o <= ucast_addr[31:0];
+       3 : wb_dat_o <= mcast_addr[47:32];
+       4 : wb_dat_o <= mcast_addr[31:0];
+       5 : wb_dat_o <= {NoPre,Divider};
+       6 : wb_dat_o <= MIIADDRESS;
+       7 : wb_dat_o <= CtrlData;
+       8 : wb_dat_o <= MIICOMMAND;
+       9 : wb_dat_o <= MIISTATUS;
+       10: wb_dat_o <= MIIRX_DATA;
+     endcase // case (wb_adr)
+   
+endmodule // simple_gemac_wb