b200: Modify initialization sequence to avoid warnings

This will set the actual default rate to an integer factor
of whatever the tick rate is, but leave the property tree
value at zero. This avoids warnings if the chosen tick rate
is not a multiple of the previous default rate, but also
returns a zero value for the rate when it has not been
initialized, allowing the user to probe if the value has not
yet been set.

1 files changed, 12 insertions, 10 deletions

diff --git a/host/lib/usrp/b200/b200_impl.cpp b/host/lib/usrp/b200/b200_impl.cpp
index 768fde313..b4fa2c1be 100644
--- a/host/lib/usrp/b200/b200_impl.cpp
+++ b/host/lib/usrp/b200/b200_impl.cpp
@@ -578,8 +578,8 @@ b200_impl::b200_impl(const device_addr_t &device_addr) :
     ////////////////////////////////////////////////////////////////////
 
     //init the clock rate to something reasonable
-    _tree->access<double>(mb_path / "tick_rate").set(
-        device_addr.cast<double>("master_clock_rate", B200_DEFAULT_TICK_RATE));
+    double default_tick_rate = device_addr.cast<double>("master_clock_rate", B200_DEFAULT_TICK_RATE);
+    _tree->access<double>(mb_path / "tick_rate").set(default_tick_rate);
 
     //subdev spec contains full width of selections
     subdev_spec_t rx_spec, tx_spec;
@@ -598,10 +598,10 @@ b200_impl::b200_impl(const device_addr_t &device_addr) :
     _tree->access<std::string>(mb_path / "clock_source/value").set("internal");
     _tree->access<std::string>(mb_path / "time_source/value").set("none");
 
-    // Set default rates (can't be done in setup_radio() because tick rate is not yet set)
+    // Set the DSP chains to some safe value
     for (size_t i = 0; i < _radio_perifs.size(); i++) {
-        _tree->access<double>(mb_path / "rx_dsps" / str(boost::format("%u") % i)/ "rate/value").set(B200_DEFAULT_RATE);
-        _tree->access<double>(mb_path / "tx_dsps" / str(boost::format("%u") % i) / "rate/value").set(B200_DEFAULT_RATE);
+        _radio_perifs[i].ddc->set_host_rate(default_tick_rate / B200_DEFAULT_DECIM);
+        _radio_perifs[i].duc->set_host_rate(default_tick_rate / B200_DEFAULT_INTERP);
     }
     // We can automatically choose a master clock rate, but not if the user specifies one
     _tree->access<bool>(mb_path / "auto_tick_rate").set(not device_addr.has_key("master_clock_rate"));
@@ -630,7 +630,7 @@ b200_impl::~b200_impl(void)
 {
     UHD_SAFE_CALL
     (
-        _async_task.reset();
+         _async_task.reset();
     )
 }
 
@@ -667,13 +667,14 @@ void b200_impl::setup_radio(const size_t dspno)
     _tree->access<double>(mb_path / "tick_rate")
         .subscribe(boost::bind(&rx_vita_core_3000::set_tick_rate, perif.framer, _1))
         .subscribe(boost::bind(&rx_dsp_core_3000::set_tick_rate, perif.ddc, _1));
-    const fs_path rx_dsp_path = mb_path / "rx_dsps" / str(boost::format("%u") % dspno);
+    const fs_path rx_dsp_path = mb_path / "rx_dsps" / dspno;
     _tree->create<meta_range_t>(rx_dsp_path / "rate" / "range")
         .publish(boost::bind(&rx_dsp_core_3000::get_host_rates, perif.ddc));
     _tree->create<double>(rx_dsp_path / "rate" / "value")
+        .set(0.0) // We can only load a sensible value after the tick rate was set
         .coerce(boost::bind(&b200_impl::coerce_rx_samp_rate, this, perif.ddc, dspno, _1))
         .subscribe(boost::bind(&b200_impl::update_rx_samp_rate, this, dspno, _1))
-        .set(0.0); // Can only set this after tick rate is initialized.
+    ;
     _tree->create<double>(rx_dsp_path / "freq" / "value")
         .coerce(boost::bind(&rx_dsp_core_3000::set_freq, perif.ddc, _1))
         .set(0.0);
@@ -691,13 +692,14 @@ void b200_impl::setup_radio(const size_t dspno)
     _tree->access<double>(mb_path / "tick_rate")
         .subscribe(boost::bind(&tx_vita_core_3000::set_tick_rate, perif.deframer, _1))
         .subscribe(boost::bind(&tx_dsp_core_3000::set_tick_rate, perif.duc, _1));
-    const fs_path tx_dsp_path = mb_path / "tx_dsps" / str(boost::format("%u") % dspno);
+    const fs_path tx_dsp_path = mb_path / "tx_dsps" / dspno;
     _tree->create<meta_range_t>(tx_dsp_path / "rate" / "range")
         .publish(boost::bind(&tx_dsp_core_3000::get_host_rates, perif.duc));
     _tree->create<double>(tx_dsp_path / "rate" / "value")
+        .set(0.0) // We can only load a sensible value after the tick rate was set
         .coerce(boost::bind(&b200_impl::coerce_tx_samp_rate, this, perif.duc, dspno, _1))
         .subscribe(boost::bind(&b200_impl::update_tx_samp_rate, this, dspno, _1))
-        .set(0.0); // Can only set this after tick rate is initialized.
+    ;
     _tree->create<double>(tx_dsp_path / "freq" / "value")
         .coerce(boost::bind(&tx_dsp_core_3000::set_freq, perif.duc, _1))
         .set(0.0);