docs: Moved manual to Doxygen

1 files changed, 0 insertions, 126 deletions

diff --git a/host/docs/images.rst b/host/docs/images.rst
deleted file mode 100644
index 37fbabf4b..000000000
--- a/host/docs/images.rst
+++ /dev/null
@@ -1,126 +0,0 @@
-========================================================================
-UHD - Firmware and FPGA Image Application Notes
-========================================================================
-
-.. contents:: Table of Contents
-
-------------------------------------------------------------------------
-Images Overview
-------------------------------------------------------------------------
-Every USRP device must be loaded with special firmware and FPGA images.
-The methods of loading images into the device vary among devices:
-
-* **USRP1:** The host code will automatically load the firmware and FPGA at runtime.
-* **USRP2:** The user must manually write the images onto the USRP2 SD card.
-* **USRP-N Series:** The user programs an image into on-board storage, which
-  then is automatically loaded at runtime.
-* **USRP-E Series:** The host code will automatically load the FPGA at runtime.
-* **USRP-B Series:** The host code will automatically load the FPGA at runtime.
-* **USRP-X Series:** The user programs an image into on-board storage, which
-  then is automatically loaded at runtime. 
-
-------------------------------------------------------------------------
-Pre-built Images
-------------------------------------------------------------------------
-
-Pre-built images are available for download.
-
-* `Master Branch images <http://files.ettus.com/binaries/master_images/>`_
-* `Maint Branch images <http://files.ettus.com/binaries/maint_images/>`_
-
-The pre-built images come in two forms:
-
-* bundled with UHD software in a platform-specific installer
-* stand-alone platform-independent archive files
-
-^^^^^^^^^^^^^^^^^^^^^^
-UHD Images Downloader
-^^^^^^^^^^^^^^^^^^^^^^
-
-The UHD images downloader downloads UHD images compatible with the host code
-and places them in the default images directory.
-
-By default, it can be found at: **<install-path>/lib/uhd/utils/uhd_images_downloader.py**
-
-By default, it installs images to: **<install-path>/share/uhd/images**
-
-^^^^^^^^^^^^^^^^^^^^^^
-Platform installers
-^^^^^^^^^^^^^^^^^^^^^^
-The UNIX-based installers will install the images into **/usr/share/uhd/images**.
-
-The Windows installers will install the images into **C:/Program Files/UHD/share/uhd/images**.
-
-^^^^^^^^^^^^^^^^^^^^^^
-Archive install
-^^^^^^^^^^^^^^^^^^^^^^
-When installing images from an archive, there are two options:
-
-**Option 1:**
-
-Unpack the archive into the UHD installation prefix.
-UHD software will always search **<install-path>/share/uhd/images** for image files.
-Where **<install-path>** was set by the **CMAKE_INSTALL_PREFIX** at configure-time.
-
-**Option 2:**
-
-Unpack the archive anywhere and set the **UHD_IMAGES_PATH** environment variable.
-**UHD_IMAGES_PATH** may contain a list of directories to search for image files.
-
-------------------------------------------------------------------------
-Building Images
-------------------------------------------------------------------------
-
-The UHD source repository comes with the source code necessary to build
-both firmware and FPGA images for all supported devices.
-
-The build commands for a particular image can be found in **<uhd-repo-path>/images/Makefile**.
-
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Xilinx FPGA builds
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-USRP Xilinx FPGA images are built with two different versions of ISE, depending
-on the device.
-
-The build requires that you have a UNIX-like environment with **Make**.
-Make sure that **xtclsh** from the Xilinx ISE bin directory is in your **$PATH**.
-
-
-**Xilinx ISE 14.4**
-* USRP X3x0 Series
-
-See **<uhd-repo-path>/fpga/usrp3/top/**.
-
-**Xilinx ISE 12.2**
-* USRP N2x0
-* USRP B2x0
-* USRP B1x0
-* USRP E1x0
-* USRP2
-
-See **<uhd-repo-path>/fpga/usrp2/top/**.
-
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-ZPU firmware builds
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-The ZPU GCC compiler is required to build the ZPU firmware images.
-The build requires that you have a UNIX-like environment with **CMake** and **Make**.
-Make sure that **zpu-elf-gcc** is in your **$PATH**.
-
-See **<uhd-repo-path>/firmware/zpu**.
-
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Altera FPGA builds
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Quartus is required to build the Altera FPGA image for the USRP1.
-Pre-built images can also be found in **<uhd-repo-path>/fpga/usrp1/rbf**.
-
-See **<uhd-repo-path>/fpga/usrp1/toplevel/***.
-
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-FX2 firmware builds
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-The SDCC compiler is required to build the FX2 firmware images.
-The build requires that you have a UNIX-like environment with **CMake** and **Make**.
-
-See **<uhd-repo-path>/firmware/fx2**.